Awesome explanation!!!

nice! easy to understand now

Ok So I have a 2008 Yamaha rhino 700 that I’m looking to put a radial wheel package on. What offset gives a better stance and softer ride for my machine vs oem offset?

I have a 2022 Polaris pro xp4 ultimate I found some wheels at a good price that are 4+4 offset would that work for my machine or is it not a good recommendation

So I have a can am outlander and I wanted to upgrade my control arms but in order to keep my 12” wheels with the upgraded arms I have to get 1” wheel spacers is it possible to get an offset that is equivalent to 1” and would that technically work? I like the look of the 12inch wheels. Thanks you.

So +10 tire site under body more?

hey brother....you mentioned the offsets for those wheels are 4+3 and other websites are wrong... every website has these in a +10mm. is that the same as 4+3??

Hello I have a 2019 Maverick X3 ds Turbo R and I want new wheels and tires but I do t know what would fit cause the trailing arm looks like it would be in the way and the shock

@FunctionPowersports

Жыл бұрын

That's a sick machine to work from! The most common upgraded wheel and tire setup is going to be a 15x7 with a 30x10 tire or a 32x10 tire. We've got a ton of them on our gallery that can show you what they look like on the maverick x3. www.functionpowersports.com/wheel-offset-gallery?key=x3&sort=yno&drive= What kind of riding do you do?

I have a Honda rancher 420 2022. Would 4+3 / 2+5 make my wheels stick out past the fender? Or even out with the fender?

@Devin_Stromgren

Жыл бұрын

I know the Honda Pioneer 500 UTV has 5+2 front wheels stock. Assuming they use the same on the rancher 4+3 would move you out one inch and 2+5 would move you out three.

Ok thanks now I understand what an offset is. But why do people in the US keep calling a rim a wheel it’s a rim. 😮

Offset is the measurement from the mounting surface of the rim to the center of the rim not from the outside face of the rim to the mounting surface. The backspace is from the back lip of the rim to the mounting surface. Usually the offset will be a mm number like +10mm or -10 mm

@FunctionPowersports

Жыл бұрын

Most ATV and UTV wheels measure offset differently than a car or truck.

@yancycf600

Жыл бұрын

@@FunctionPowersports in the video he refers to the offset being from the face of the wheel and not the mounting surface.

@FunctionPowersports

Жыл бұрын

That's how it's measured for ATV/UTV. In his example on a 7" wide wheel, the listed Offsets was 4+3. The 4 is inches from the back of the wheel to the mounting surface and the 3 is the inches from front of the wheel to the mounting surface. They aren't measured in mm from mounting surface to center like a car or truck wheel.

@yancycf600

Жыл бұрын

So what would a +10mm be? 5+2 or 4+3?

@FunctionPowersports

Жыл бұрын

It would be closest to a 4+3, At a +0 offset in traditional backspacing that would be 3.5+3.5 in ATV/UTV since its equal on either side. Technically +10 in traditional backspacing would equal out to about 3.9+3.1 in ATV/UTV so basically 4+3 which is really common for ATV/UTV wheels.