Name of the product and company i already using of selec
@wigunawandi7621Ай бұрын
How long maximum delay time we can set from shut down to recover as we set voktage and current
@NorthernRestoration-rk4cuАй бұрын
Yes it can limit current and voltage, but dont use that in a solar set up with automatic transfer switch If the ats will transfer the power from the solar set up to on grid vice versa The device will not work properly
@ranjitpal99372 ай бұрын
Thanks Again ❤
@Electricalworlds2 жыл бұрын
Nice ❤️❤️
@ajitjalady Жыл бұрын
Does this device do similar work of surge protector?
@RaihanAhammed28
Ай бұрын
Yes
@RaihanAhammed28
Ай бұрын
This is RCBO Combination of mcb+rccb
@bishalshah233
11 күн бұрын
Nope, that's not rcbo. it's voltage monitoring relay VMR. It's not fast enough to protect from surges. Surge protector is connected in parallel to main supply and driverts excess power to earth.
@pavanpavan992 Жыл бұрын
Can we use it for DC 180v current.
@trialnterror Жыл бұрын
Is there something I can buy that’s premade? I have a plasma cutter with a 50:1 output. That puts out about 2.5volts I need something that won’t let the voltage go above 8 volts and will shut down if ac hits it to. Reverse voltage would be good also. Is there something I can buy?
@willowsprings1634
3 ай бұрын
Is there a DC version of this device for solar system... ?
@devarajmohannaik34032 жыл бұрын
Where it is available?
@theindia97255 ай бұрын
Sir,can it be used to 1 HP submircebl motor?
@toothless2900 Жыл бұрын
Does this work for 3 phase motor ?if not do you have anything that helps to turn off the 3 phase motor in case of current imbalance?please reply I'm willing to buy it immediately
@CNCElectric1988
Жыл бұрын
hi friend, you can check this one that just can meet your demand: www.cncele.com/china-beat-3-gang-2-rocker-1-blank-company-jd-5-jd-6-motor-integrated-protector-cnc-electric-product/
@AsadButt-mc5fbАй бұрын
How much it's own Ampair load 👌
@alokphilip1751 Жыл бұрын
Face to face hoga tab kiya hoga
@SJamalshah19 күн бұрын
How to install in it in main switch please make a video
@BamideleUnity21 күн бұрын
How do we program it
@petrusanwar1888 Жыл бұрын
Sir, Up to now, still use it ?
@S_H987
Жыл бұрын
Device name and price please
@heartless5512 күн бұрын
Price
@varunchaudhary6443 Жыл бұрын
Cost
@mdnuruzzamankhan60234 ай бұрын
এটা,আমি নিবো কোথায় পাবো
@icebroswii.81622 жыл бұрын
240V is normal in Uk, so not working there
@sathishramasami807
Жыл бұрын
We can adjust.. whatever
@alexconcepcion20123 ай бұрын
Can this device has lower than 1ampere in current like 0.5ampere.?
@RaviKumar-uy8ss
Ай бұрын
no bro, minimum 1 amp
@eternalslayer114110 ай бұрын
Where to get it
@CNCElectric1988
10 ай бұрын
you can check our official online web for it sir: www.cncele.com/china-beat-63a-voltage-protector-company-yc9va-3-voltage-protection-relay-cnc-electric-product/
@mduzzalislan8971Ай бұрын
দাম কত টাকা
@khurram6192 ай бұрын
Would you send me at my address the same device , let me know device price in karachi
@akmalshaheen7848Күн бұрын
No delay time in device
@vikasb14007 ай бұрын
Where to buy same
@CNCElectric1988
7 ай бұрын
Check this link please: cnc-official.com/products/cnc-yc6va-household-din-rail-adjustable-digital-dual-display-limit-over-current-protector?_pos=1&_sid=9caf67706&_ss=r
@RM_YT71 Жыл бұрын
Want to see inside of this products
@ibrahimazzam4903
6 ай бұрын
😂 esp8266 with relay
@TimelyTurtle
26 күн бұрын
Naah not really @@ibrahimazzam4903
@shahida19769 ай бұрын
Is this handle transformer fault
@CNCElectric1988
9 ай бұрын
what does the fault you mean?
@SahajahanAli786 Жыл бұрын
Where to buy in Kolkata?
@CNCElectric1988
Жыл бұрын
there is juts no dealer sir, you can directly purchase online in our CNC official store: cnc-official.com
@mumtazalam131611 ай бұрын
Sir is device ki full name kya hai
@CNCElectric1988
11 ай бұрын
under/over voltage protector
@imnotbeluga007 Жыл бұрын
I'm getting upwards of 245V in my house, so this will keep cutting out. The standard is 230V, but I'm getting 245V. Maybe it's some phase difference, but not likely. But it is programmable, so this can be changed.
@adnozinabie1026 Жыл бұрын
What is the device name? Please send me.
@CNCElectric1988
Жыл бұрын
it is the under/overvolatge protector from we CNC Electric
@ajarivas72
8 ай бұрын
@@CNCElectric1988 I love your channel
@CNCElectric1988
8 ай бұрын
thanks for your support sir @@ajarivas72
@rajuelectricmedia7829 Жыл бұрын
imo number daw
@JoseAMorais Жыл бұрын
Do you know how to turn off the undervoltage protection?
@techrama9642
5 ай бұрын
Set undervoltage 100V
@BALWINDERSINGH-gn2hr2 жыл бұрын
How much.?
@RaviKumar-uy8ss
Ай бұрын
about 1300
@Best_pach7 ай бұрын
Useless its led burned and my inverter also burned
Пікірлер: 59
Name of the product and company i already using of selec
How long maximum delay time we can set from shut down to recover as we set voktage and current
Yes it can limit current and voltage, but dont use that in a solar set up with automatic transfer switch If the ats will transfer the power from the solar set up to on grid vice versa The device will not work properly
Thanks Again ❤
Nice ❤️❤️
Does this device do similar work of surge protector?
@RaihanAhammed28
Ай бұрын
Yes
@RaihanAhammed28
Ай бұрын
This is RCBO Combination of mcb+rccb
@bishalshah233
11 күн бұрын
Nope, that's not rcbo. it's voltage monitoring relay VMR. It's not fast enough to protect from surges. Surge protector is connected in parallel to main supply and driverts excess power to earth.
Can we use it for DC 180v current.
Is there something I can buy that’s premade? I have a plasma cutter with a 50:1 output. That puts out about 2.5volts I need something that won’t let the voltage go above 8 volts and will shut down if ac hits it to. Reverse voltage would be good also. Is there something I can buy?
@willowsprings1634
3 ай бұрын
Is there a DC version of this device for solar system... ?
Where it is available?
Sir,can it be used to 1 HP submircebl motor?
Does this work for 3 phase motor ?if not do you have anything that helps to turn off the 3 phase motor in case of current imbalance?please reply I'm willing to buy it immediately
@CNCElectric1988
Жыл бұрын
hi friend, you can check this one that just can meet your demand: www.cncele.com/china-beat-3-gang-2-rocker-1-blank-company-jd-5-jd-6-motor-integrated-protector-cnc-electric-product/
How much it's own Ampair load 👌
Face to face hoga tab kiya hoga
How to install in it in main switch please make a video
How do we program it
Sir, Up to now, still use it ?
@S_H987
Жыл бұрын
Device name and price please
Price
Cost
এটা,আমি নিবো কোথায় পাবো
240V is normal in Uk, so not working there
@sathishramasami807
Жыл бұрын
We can adjust.. whatever
Can this device has lower than 1ampere in current like 0.5ampere.?
@RaviKumar-uy8ss
Ай бұрын
no bro, minimum 1 amp
Where to get it
@CNCElectric1988
10 ай бұрын
you can check our official online web for it sir: www.cncele.com/china-beat-63a-voltage-protector-company-yc9va-3-voltage-protection-relay-cnc-electric-product/
দাম কত টাকা
Would you send me at my address the same device , let me know device price in karachi
No delay time in device
Where to buy same
@CNCElectric1988
7 ай бұрын
Check this link please: cnc-official.com/products/cnc-yc6va-household-din-rail-adjustable-digital-dual-display-limit-over-current-protector?_pos=1&_sid=9caf67706&_ss=r
Want to see inside of this products
@ibrahimazzam4903
6 ай бұрын
😂 esp8266 with relay
@TimelyTurtle
26 күн бұрын
Naah not really @@ibrahimazzam4903
Is this handle transformer fault
@CNCElectric1988
9 ай бұрын
what does the fault you mean?
Where to buy in Kolkata?
@CNCElectric1988
Жыл бұрын
there is juts no dealer sir, you can directly purchase online in our CNC official store: cnc-official.com
Sir is device ki full name kya hai
@CNCElectric1988
11 ай бұрын
under/over voltage protector
I'm getting upwards of 245V in my house, so this will keep cutting out. The standard is 230V, but I'm getting 245V. Maybe it's some phase difference, but not likely. But it is programmable, so this can be changed.
What is the device name? Please send me.
@CNCElectric1988
Жыл бұрын
it is the under/overvolatge protector from we CNC Electric
@ajarivas72
8 ай бұрын
@@CNCElectric1988 I love your channel
@CNCElectric1988
8 ай бұрын
thanks for your support sir @@ajarivas72
imo number daw
Do you know how to turn off the undervoltage protection?
@techrama9642
5 ай бұрын
Set undervoltage 100V
How much.?
@RaviKumar-uy8ss
Ай бұрын
about 1300
Useless its led burned and my inverter also burned
@EnSabahNur-ir5mw
4 ай бұрын
Pagal hai keya