Thank you so much for this video. It is the best one I have seen. You are very detailed in your information and don't gloss over important details.

@TheBabysBooty

Жыл бұрын

Thank you kindly! 😊

Thank you so much for your tutorial. I too left my L1800 without printing for some time and here is the fun part. I took my L1800 out the box, loaded the ink and had to leave it alone because I got sick and had to be hospitalized. I really thought I had a very large and heavy paper weight, but your video gave me hope. I purchased brand new dampers and tubing and made sure the ink bottles are flowing; wish me luck. I will keep you posted. Thanks again for your help. 1

@TheBabysBooty

Жыл бұрын

I hope it worked!

Wow! You just gave me the best video and information I needed. I wish I had know some of this sooner. Better late than never! Thank you so much!!

Thank you so much for this video, yours was by far the best one with explaining everything!

@TheBabysBooty

2 жыл бұрын

You're welcome! Thank you for taking the time to watch our video and leave a comment 🤗

Thanks for making and sharing this, it's been a life saver. So simple to follow and it go the job done.

@TheBabysBooty

Жыл бұрын

You're welcome 😊

Best most detailed explanation. Thank you

Thank you for the video, I had good result from the ultrasonic cleaning. I also used clear tape to cover the portion where the chip/electronic were exposed, I found some droplets on the tape which prevent the solution from getting to the chip.

Your are the BEST! Thank you for the video. The walkthrough was amazing easy and simple pretty much dummy proof. Keep doing what you do. I have subscribed!

@TheBabysBooty

2 жыл бұрын

Thank you kindly! 🥰 I appreciate you taking the time to let me know the video was helpful.

@creditrockzboyz103

Жыл бұрын

@@TheBabysBooty Hello my l1800 do not print yellow ink can you help me or tell me the reason why

My heart races every time we have to remove and clean that print head. some people skydive for a rush. we claen printheads for a rush loolololo good work im with ya

I think you just saved my life!! Thank you!

@TheBabysBooty

2 жыл бұрын

Yay! Thank you for letting me know it was helpful!

Thanks Mam needed this tutorial

thank you, this helped me a lot . .

@TheBabysBooty

Жыл бұрын

You are very welcome! I appreciate you taking the time to watch our video 😀

nice video. it will not damage the head by the sonicwave yeah?, ive seen another video how it kinda melts the metal parts and stuff. so im worried. im using l1800 too..so i decided to by a cheap jewelry cleaner

A promising technique. I have a couple of L1800 printheads that's already clogged to test this. Thank you. Will update with the result.

@TheBabysBooty

2 жыл бұрын

Just be cautious ⚠️ and remember that you can destroy the printhead if liquid gets in it.

@hanzjerichogarabiles5198

2 жыл бұрын

Any update?

@rassimkr9441

2 жыл бұрын

.

Thank you for making this video! It helped me fix my issues!

@TheBabysBooty

Жыл бұрын

Glad it helped!

Thank you! I wish I found this yesterday. My head soaked for 24 hours and was still clogged. I bought a little ultrasonic cleaner and bam the clog seems gone. I'm running a purge now. Fingers crossed it actually works. :) I have a dtg with the l1800 head.

@TheBabysBooty

2 жыл бұрын

I hope it did finally work for you! Head clogs are so frustrating!

@hanzjerichogarabiles5198

2 жыл бұрын

Does the ultrasonic cleaner totally unclogged your head?

@stuartcotterill9475

Жыл бұрын

@@hanzjerichogarabiles5198 yes but will damage the piezoelectric components

Nice Video, i reccomend you Use 1ml Syringe, the pressure is lower so it is safer

Hello, a question so to clean an epson et2721 printer head in the ultrasonic tank I can't immerse it all? Or are there gaskets that would break? What temperature can it be set at?

It's very cool clining method! Good job! Thanks!

@TheBabysBooty

2 жыл бұрын

You are welcome! Just be super careful!

Can i use isopropryl alcohol as the cleaning solution and what is the frequency of your ultrasonic cleaner?

I thinking to buy that epson and DTF technology.. how often print head must clean ?

Thank you so much!!!!!

Hello mam my inks is not charging in the dampers . Manually I pull and the doesn't action into head

Hello, I am currently facing a problem with the Syringe method for my white ink. The ink doesn't seem to move from the damper to the syringe and there was a lot of resistance when I pull on the syringe. I tried your method but the problem still persist, do you have any idea how can I solve my issue?

I did the same but couldn't manage to unclog the white channels. Not sure if my cleaning solution isn't the best or I putted too much pressure to the head but after the procedure it is even worst than before. Looking forward to receive my new head...

@TheBabysBooty

2 жыл бұрын

I'm sorry to hear that. We can't rush the clogs. Until your new one comes in, maybe let that one soak in pure original windex OR get the clog buster solution. I forget who makes it.

Awesome video 👍🏿

@TheBabysBooty

2 жыл бұрын

Thank you! 👍 I appreciate it!

I was wondering if you could share any solutions or suggestions for getting rid of the pizza wheels. I've tried the cardboard with cleaning solution, rubbing alc and a few other methods and nothing has worked.

You are toooo good ❤ thank you very much

which RIP software do you use? Have you ever had issues where no white ink prints?

I have tried all methods...and changed head printed ok for few days but again the same issues...of white ink not coming...what might be the reason is it ink??

I’m still having issue with my white ink. I followed your steps. When I print the white is coming out milky. I have no clue. Could it be the white ink is expired maybe?

What do you think about buying a L1800 used the lady said the white ink is clogged and how much would you pay.

Thank you so much for the detailed steps. ❤

@TheBabysBooty

Жыл бұрын

You are so welcome!

Hi my punehod l1800 isn't printing and when i do a nozzle clean it squirts black ink from the waste pad that is held on by a tiny spring any ideas plz

Great video but this Ultra Sonic Machine ruined my basically brand new Print Head. I ran it twice at 180 seconds. After I was done, when I pump cleaning solution through nozzle 1, it comes up out of nozzle 3 and so fourth. I think the heat melted the diaphragms or loosened all the seals inside the print head. I recommend no longer than 90 seconds and let it cool before running it a second time.

Hi my print head getting clotted (Yellow and Black and White near by Black ink) i removed print head and using solution I tried to resolve this issue. But cleaning solution not getting out via print head nozzles. can you give some solution for this ? Thanks in advance

Thank you boss.

@TheBabysBooty

2 жыл бұрын

You are welcome 💪🏽

This method unclog my printhead thanks

Great video very helpful , thank you

28:00 what if the solution did not come out and I feel some resistance what should I do?

Can you tell me what it means if I got no streams on any of the channels?

Merci beaucoup pour cette petite vidéo bien utile!!!

My l1800 makes a loud noise when trying to print and does not print any thing at all. Do you think I need a new print head?

What else can I use if I don’t have the cleaning solution?? I’m waiting for it to deliver but my yellow is clogged

You go girl

Hello and thanks for the detailed video, question though I've seen another video where the printhead is cleaned but the guy strongly recommends not putting the printhead in the machine you used because according to him it can damage the gaskets in it. He recommends separating the nozzles from the printhead and putting only the nozzle in the cleaning machine as he said most times the clog is in their. What are your thoughts on that

@TheBabysBooty

3 ай бұрын

I don't have any opinions on that. I can only refer to my own experience. I haven't had issues out of my printer from this process. 🤷🏽‍♀️

Is there any solution to never clog the head print?

I received a fatal error, where in the best place to get a print head?

Where did you order your cleaner ?

hey i have the l1800 and my tank will not turn on when running. Has anyone ran into this problem?

What is the world best head cleaning lequied

what is that liquid name? May know that product?

Hey there! I spent all day yesterday attempting this and had to continue today when the ultrasonic cleaner came in today. Now it seems nothing will come through. How would I know if the gasket part on top is busted?

@trapnerd1173

Жыл бұрын

Did you ever figure it out I’m having the problems you’re having

What happens if I turn the print head upsidedown and put it in the solution. I am not getting any liquid through at all. I think the 6 nipples might be clogged

HELLO, how many pages to print, does the print head last, I have an Epson L1800 DTF printer, thank you for the answer, white color does not print. ZDENEK

The streaking you had after cleaning might be ink build up on the underside of your carriage. I have had success cleaning that by the following method. With the printhead removed, place some paper towels on the bed of the printer. Then put a little cleaning solution on the paper towel. Next move the carriage back and forth over the paper towel. Repeat this process until the underside of the carriage is clean.

Please also note, DTF Inks and DTG inks are definitely not the same. When DTG inks dry up, it becomes rubber and cannot melt away with cleaning solution like DTF Inks. So when DTG Inks clog a print head, majority of the time its permanent.

@TheBabysBooty

2 жыл бұрын

That is not the information that I was given from a reputable DTG machine manufacturer that also makes DTF machines. 🤷🏽‍♀️

nice video

L805 Cleaning after disassembling the head I put it back together and tried to print it out, but it came out as white paper. What should I do?

@trapnerd1173

Жыл бұрын

Did you ever figure this out

I cleaned my print head and refitted and now I can't power the printer, it is not turning on. I am wondering if I damaged the power board when I removed the power cable (9:18) to move the print head into the centre. I have tried two different cables, both work as tested with other devices.

@ursdubel3585

2 жыл бұрын

You can try a so called "contact spray" helped me out a few times 👍

thankyou.......

Hey, Im having a problem where the white isnt thick enough on the back layer, and whenever I apply the adhesive powder it removes the top layer of white, and damges the image leaving a little of spots missing ink, very small spots. Do you have a solution for this?

@TheBabysBooty

Жыл бұрын

You may have a clogged white channel OR you may not have your white turned up enough. Your powder should NOT be removing the white top layer, maybe change to a different powder.

gotta question here, i get a broken 2 lines on white when i nozzle check, i already push cleaner from nozzle but the mid section of printhead not spraying, any idea?

@TheBabysBooty

4 ай бұрын

Still have a clog.

@2WistedWolf

4 ай бұрын

@@TheBabysBooty any idea how to solve this ?

i bought a ultransonic cleanr. dadi 968 but there is no bubble coming up, i put the windex glass cleaner

What could I do if my printer prints completely blank pages after cleaning?

@trapnerd1173

Жыл бұрын

Did you figure it out

Where do you buy a replacement Printhead? I am wanting to have an extra on hand but not sure the most reliable source. Thanks!

@TheBabysBooty

Жыл бұрын

Epson or a reputable printer parts company.

Change the white damper it will be all right because i have faced the same issue earlier

@neeraj00875

2 жыл бұрын

And also clean the whipe blade there is also some buildup

Mam ❤️ luv u and thx for .....

Good

I tried this. It destroyed the seal on my print head. It started bubbling up and I thought “yay! It’s working!” Then it started bubbling other colors through each nozzle. So it wasn’t me flushing too hard. That was literally a brand new printhead less than 12 hours in the machine. I took all the precautions to make sure the lines were clean, bottles were clean, new damper…head cleaning and wet cap at the end of the day. It shouldn’t have been clogged but after hours of soaking one white nozzle was totally blocked so I decided to try this and bam. $300 mistake.

@TheBabysBooty

2 жыл бұрын

Which it CAN happen. It has not happened to me yet with two different print heads on two different machines, but it CAN happen.

@manuelpicazo8969

Жыл бұрын

this is to break up the ink> Next time dont force to much pressure when pushing cleaing solution you have to be gentle and also the trick is to do a reverse suctions

This is exactly what I needed! The place I bought my printer from is awful with support. I did this to my 1 month old printer that was not printing at all. They wanted me to buy a new $500 print head when I just needed to clean it. All the inks work great but the white is faint... So I am going to clean those again and hope it works. If not, do you have a store you recommend to purchase a new printhead?

@kaseyharrod2697

Жыл бұрын

Did you find a new print head?

@TheBabysBooty

Жыл бұрын

I did

@kaseyharrod2697

Жыл бұрын

@@TheBabysBooty I have someone local that has a printer but says it’s faint and needs new print head. Thinking about taking the leap. But nervous I can’t fix it

@cherylbellers285

Жыл бұрын

Can you tell me wher you purchased your new replacement print head?

Do you know how to change the cartridges?

@TheBabysBooty

Жыл бұрын

I do, but I don't have a video on it.

Have you ever had it not print any color after a flush like this?? All of my color was printing fine except white until I did this flush…I know the white was clogged because it took a bit to get the white to finally flush clear streams. I put it all back together and now it’s not printing anything 🤦🏼‍♀️😂 oh my. Thank you so much in advance!!

@TheBabysBooty

Жыл бұрын

Be sure you didn't get the connections wet or backwards or loose. See if either of those three are the issue.

@SenZationalDesignsCreations

4 ай бұрын

​@@TheBabysBootyhow can you tell if you got the connections wet accidentally?

@tiffanyscott6601

3 ай бұрын

I'm having the same issue jenniescott is I get some lines with head cleanings but that's all how can I tell if my connections are messed up

is it possible to revive the head by this method?, example the one that i replaced because of the maybe clog issue or it just cant print

Thank you very much very ,very interesting video. Can you fix my printer? I have 2 Epson L1800 head printer clogged. let me know I can send to you by UPS

where can i buy that machine? I'm from Philippines

@reypascual1415

Жыл бұрын

Sa shopee manang.

What if the ink doesn't come out when I'm pushing the solution through?

@TheBabysBooty

Жыл бұрын

Then that sounds like a more serious clog. I would consult with a repair person

Well...i HATE that i am having to watch this ..but that is what happens when you get super sick and are not able to do anything for weeks... too bad there isn't someone here in the DFW area to come do this for me...lol (almost tempted to just buy a new head instead)

@lisaakalolli6611

2 жыл бұрын

that came out wrong..i dont' hate watching your videos.. LOVE THAT... just hate that i have to do THIS so sad

Does this happen often. I’m thinking of getting one of these.

@TheBabysBooty

2 жыл бұрын

it does if you let it sit.

@whatstheteemorebyrocexpres3047

2 жыл бұрын

@@TheBabysBooty like when you go on vacation 7-10 days?

@TheBabysBooty

2 жыл бұрын

@@whatstheteemorebyrocexpres3047 More like, Not using it for Two days!!! Must print daily. If you plan to go on Vacation, there is something you can do to keep it from clogging... But you'd have to buy an extra set of print cartridges and fill them with cleaning solution and let that sit in the printer while you're gone. That's a completely different technique.

@whatstheteemorebyrocexpres3047

Жыл бұрын

So I actually got the printer in December and this week my white got clogged. I’ll be attempting this today. Also ordered a backup printhead today. Hopefully I can get back up running by tomorrow. Lots of work.

this is almost like dtf science im sure this can end up being in the acedemic world

Is there away in can contact you!

@TheBabysBooty

2 жыл бұрын

I REALLY appreciate you reaching out to me!

why is that after changing new printhead there is no prinout in my paper, its completly blank without any print at all. i hope someone can answer my question. ty

@shazid8014

2 жыл бұрын

Do head cleaning.

@boldbespoke

2 жыл бұрын

Try power ink flush in maintenance

@studioprintz

Жыл бұрын

Have you figured out how to get the ink printing after change the printhead? I’m having the same issue! Please help

@trapnerd1173

Жыл бұрын

Did you figure it out kim sue?

@TheSpilledTee

Жыл бұрын

Do an ink charge in your Epson resetter software

💪🏿💪🏿💯🔥🔥🔥💯💯

HI IVE TRYD THIS BECAUSE MY WHITES WERNT COMING THROUGH AND NOW I DONT HAVE ANY COLOURS COMING THROUGH AT ALL HHEEELLPPPPP

@warrenleigh9796

2 жыл бұрын

Have the same problem. Did you ever figure this out?

@katrinaleon5986

Жыл бұрын

Meee 2 HELP

@abdelalichiheb9232

Жыл бұрын

Anyway figure out here? Please

That is so odd, I have an L1800 and I cannot continue with the steps. I don't have the clamps you are referring to 😖🥺

@TheBabysBooty

Жыл бұрын

Uh oh! I apologize! Maybe you have a newer version.

Is your printer still working?

@TheBabysBooty

Жыл бұрын

No, but only because I stopped using it.

Sorry but ultrasonic bath is not the way to do it, because there is very high possibility that you gonna end up with broken seal. When that happens the head is useless.

@TheBabysBooty

2 жыл бұрын

🤷🏽‍♀️ that's a matter of opinion when you're desperate. It has worked very well for me and a few hundred others. Is there a risk? Yes! And I clearly state that.

Using an ultrasonic cleaner on an epson piezo print head will ..RUIN IT

@TheBabysBooty

2 жыл бұрын

Thus far... it hasn't. But I definitely put in the description that destruction IS a possibility.

@mikegraham8319

2 жыл бұрын

Hi , further research says that it is more detrimental to the Epson dx4/ dx5 /dx7 heads because the foil head is a lot thinner on those so maybe the cheaper models will be ok just be careful nonetheless 😉

@TheBabysBooty

2 жыл бұрын

Thanks for the update! 💪🏽

good old Epson. guaranteed to clog and not work!

@AlexanderMoriarity

2 жыл бұрын

I have a 7710 it has been solid for 5 years. 4 months I have had the L1800 it's only problems I printed on it more error than work..

muchas gracias por la informacion

Long story,, boring.

Thank you so much for this video. It is the best one I have seen. You are very detailed in your information and don't gloss over important details.

What else can I use if I don’t have the cleaning solution?? I’m waiting for it to deliver but my yellow is clogged

I tried this. It destroyed the seal on my print head. It started bubbling up and I thought “yay! It’s working!” Then it started bubbling other colors through each nozzle. So it wasn’t me flushing too hard. That was literally a brand new printhead less than 12 hours in the machine. I took all the precautions to make sure the lines were clean, bottles were clean, new damper…head cleaning and wet cap at the end of the day. It shouldn’t have been clogged but after hours of soaking one white nozzle was totally blocked so I decided to try this and bam. $300 mistake. 😭

@jameswhite5911

2 жыл бұрын

Same here, After I was done, When I pump cleaning solution through nozzle 1, it comes up out of nozzle 3 and so fourth. I think the heat melted the diaphragms or loosened all the seals inside the print head. I recommend no longer than 90 seconds and let it cool before running it a second time.

@AlexanderMoriarity

2 жыл бұрын

Ouch I am debating what to do going onto maybe a 3rd head. My new "Refurbished" is giving me a terrible nozzle check prints are no white so frustrating and waste of my hard earned money.