How it works perfection, for we who just took one apart for a project and didn't know better until now. Awesome video for its tight focus, execution, and usefulness (to me).

Fantastic. This is exactly how an 'in breathing circuit' ultrasonic nebulization machine works. The device is housed in a clear plastic housing, the piezo element is exposed to a small chamber where 5 ml of Bronchodilator (Asthma) medication, is added. The chamber has 2 connector ends (a standard circular connector has 22 mm outside diameter, 15 mm inside diameter) which goes in between the inspiratory tubing and the ventilator. Every breath takes micron sized particles of the liquid drug to the respiratory tract. This device proved very valuable to covid patients on ventilator. Please be inspired to make one. Good luck

@MREasyMaker

2 жыл бұрын

👍

@zohaibfaraz6976

Жыл бұрын

Plz I want this

@palashroy1373

7 ай бұрын

I also think same of your comment

@creativenawab2773

2 ай бұрын

can we make portable nebulizer for this mist maker ?? for respiratory problem ???

@Radoblenc

2 ай бұрын

@@creativenawab2773 Yes baba, it already exists in the market. It is very expensive. I have used it but the model is only available as a ventilator attachment for ICU patients. Can you make one?

Would it be possible to add a second mister in series with the first? Or is there a way to add on more ultrasonic elements to this circuit such as amplifying the out put frequency and adding additional channels?

My original intention for this humidifier was to use it for plants that require high moisture levels. After using it in my room, kzread.infoUgkxtD9aJ2m6GU-X1IChQxjn9l31K1A7Kpwj however, I think that's where it is going to stay in the fall and winter season at least. The increased humidity in my room made the room warmer and more comfortable. I had first ran the humidifier for 4 hours with the timer setting for it. After the first hour, I checked my room and can feel the difference. When the full 4 hours was up, I checked again and noticed that the humidifier was shut off as it is suppose to. The moisture level never seem to get passed 56/57%. I then let it run until all the water is used up, which it wasn't all used up. There are still some left in the base that you are not suppose to add water to. I filled up the water tank all the way again, being careful when removing it from the base. Some left over water may spill out. After putting it back on and setting the unit to auto, I let it operate. It didn't stop running, rather I don't know if it did at any point since I didn't check it regularly, for 24 hours after which the water in the tank ran out. The moisture reading never passed 56/57%, which may be a good thing for me. Being situated right next to my bed, the noise was not very noticeable with the occasional water gurgle from time to time as the unit ran.

*humiditer We liked it **Fastly.Cool** so much in the basement, we bought a second one for the main level. The amount of moisture it pulls out of the air is astonishing.*

So I bought one , but the mist I’m getting is not even close to what you got there , can I fix it or no

is there a way to make it work without driver circuit

Hlw sir can i used it for nabulyzer??? What is your Opinion??

Olá vc já tentou na posição horizontal? Gostaria de usar na miniatura como escape do caminhão miniatura

hello sir vibration wala kaha sa milega

How to bay it

My one isnt sprayng water why is that ?

Bhai kha se buy kare batao na please 🙏🙏🙏🙏🙏🙏

What is the price of this. Humidfer

malamig po ba siya?

I have an old mist part. But i doesnt spray. Do you know what's the problem in my mist?

@MREasyMaker

2 жыл бұрын

Purchase a mist maker kit

Hi, are there any small holes in the vibration mold? thanks.

@MREasyMaker

2 жыл бұрын

Yes. Some small holes.

@larryleoca

2 жыл бұрын

@@MREasyMaker Thanks.

¿por que no lo conecta directamente a la batería 5v y ya? ¿POR QUE LA COMPLICACIÓN?

Set this device in front of fan... Its helps

Bhai Kaha se mangvaya

Bahi ha kdr mala ka muja Bata o

Can I use wall fan and these units to cool down get cool air, is it?

@MREasyMaker

3 ай бұрын

yes

@i_swethika

3 ай бұрын

@@MREasyMaker can you suggest me a big good humidity maker for a large room, my intention is to get cool air only

Ye kitne ka aata hai please bataa do

Kahan sa mily ga

I have to make a working model of water cycle so if i make the river , will this remain ok [ matlab ye kharab to nai hoga na jab hmlog pani me jyada der rakhe to ? ]

@MREasyMaker

9 ай бұрын

No problem

@funshunwithvd8494

8 ай бұрын

And did you stick the wire with a hot tool , can I use fevi quick to stick 3.7v battery ?

@MREasyMaker

8 ай бұрын

@@funshunwithvd8494 wire is pre assembles. Put some glue on wire joint,

Plz price

What is prise

Link batao bai

If you put a dye in the water will it spray coloured water eg: black dye for simulated smoke?

@MREasyMaker

2 жыл бұрын

Yes

@rogerwindsor2130

10 ай бұрын

No it wont. The dye will clog the wick. Check out TRS trains .

Do you need a special control for that, or just dc voltage will do it?

@MREasyMaker

2 жыл бұрын

only dc

Does the water stay cool or heats up?

@MREasyMaker

2 жыл бұрын

neither cool nor heated,

Can u teach me how to solder tge wire to circuit

@MREasyMaker

2 жыл бұрын

what do you mean by 'Tge' wire?

Hello sir..

Can i add more strips to this module?

@mdtajul9802

3 ай бұрын

price price

یہ ڈسک کس جگہ سے ملتی ہے۔؟

ए स्मोक मशीन कितने रुपए की आती है

As gajit ka name kiha

For Purchasing, no link you provided

@MREasyMaker

3 жыл бұрын

Yes dear. Sorry for that. Check after 5min

Can i put ice water bro is there any problem by using cold water on it plz reply?

@MREasyMaker

Жыл бұрын

no problem

@speedygfx

Жыл бұрын

@@MREasyMaker Are you sure is there no problem by using with cold water pakka sure????

@MREasyMaker

Жыл бұрын

@@speedygfx yes

Ye jo niche carpet hai usko kya khte hain or kha se le skte hain koi please btana

@MREasyMaker

2 жыл бұрын

paper cutting mat. amazon

@domain3973

2 жыл бұрын

@@MREasyMaker thanks 👍

এটি দাম কত হবে বলবেন

Can I decrease my room temperature slightly with this??

@MREasyMaker

2 жыл бұрын

no

@hafizktym8114

2 жыл бұрын

Buy link?

Can we immerse the disc entirely in water ? Or will it get damaged if we dip it entirely in water ?

@MREasyMaker

3 жыл бұрын

Place it by touch of water, not in the deep water.

@akash765.

Жыл бұрын

Banano Jai diagram ta daba

Would you please inform me power (volts value) on Ultrasonic Mist Maker

@MREasyMaker

Жыл бұрын

5 to 9v

@richardcamacho904

5 ай бұрын

@@MREasyMakerwhere can I buy the mist maker

Fogger ceramic disc প্রয়োজন, আপনি কি সাহায্য করতে পারবেন কোথায় পাবো বাহ অনলাইনে কোন পেইজে পাবো

@MREasyMaker

2 жыл бұрын

ami online theke niechilam, apni online e search korte paren

It emits hot or cold steam

@MREasyMaker

26 күн бұрын

Not cold but feeling little cold

12v battery possible?

@MREasyMaker

2 жыл бұрын

This circuit operated with maximum 6v

Can I make a cooler using it? Is the fogg cold enough?

@MREasyMaker

Жыл бұрын

fogg temperature as like as your water temperature.

@martinsaviationlife2690

Жыл бұрын

My "cooler" is basically just this inside a tube and then a fan blowing it into the air

Bro Will It Charge My 2000mah Lithium Battery

@MREasyMaker

11 ай бұрын

yes

It is humidifier heart.

Is this make atmosphere cool?

@MREasyMaker

3 ай бұрын

Little

@d4567889

3 ай бұрын

@@MREasyMaker please make lost of mist so that it will be cool use small fan for cooling

Maker bajar online mein aata hai ki nahin aata please batao na 😎

@MREasyMaker

11 ай бұрын

Online mai sabkuch milta hai

सर इस वीडियो को बनाने का आप का क्या मकसद है परपस है कृपया बताएं

@ahyanarceo1067

Жыл бұрын

Its just jeolusing us and nonsesnse vid

How is buy

@MREasyMaker

3 жыл бұрын

Click the link given in description

Order kha sa kara

@MREasyMaker

Жыл бұрын

check description

Maybe you can do your on nano automated alcohol mist dispenser that will be cool to make

@MREasyMaker

3 жыл бұрын

🌹🌹🌹🌹

@lifeisbeautiful4598

Жыл бұрын

Easy to catch fire

Kahape milega

@MREasyMaker

2 жыл бұрын

Amazon

Please keep the circuit diagram for this

@MREasyMaker

3 жыл бұрын

Its very simple, see this video carefully

@dhanushm3690

2 жыл бұрын

kzread.info/dash/bejne/mJugl7eEqazeabA.html You can get the circuit diagram from here.

Link dal lo

can I turn it on with no board?

@MREasyMaker

2 ай бұрын

circuit board is must

@user-yy5ht5hn8c

Ай бұрын

2:35 ​@@MREasyMaker

what circuit did u use?

@MREasyMaker

2 жыл бұрын

fog maker circuit included with that kit, available online.

1 please

What happens if there ks no water and the humidifier is still working

@MREasyMaker

2 жыл бұрын

nothing

Product ka link do na please 🙏🙏🙏

@MREasyMaker

Жыл бұрын

ROBU.IN Pe search karna.

Khredna hai kaha milegi 😢

@MREasyMaker

10 ай бұрын

Online milega. Maine robu.in se purchase kiya.

Iska rate batao aur kha milega

@MREasyMaker

Жыл бұрын

online shopping site mai milega

Kahan sy milta h adres

@MREasyMaker

2 жыл бұрын

amazon, robu.in pe search karo

Kenar link ta dao

@MREasyMaker

4 ай бұрын

amzn.to/2Rm99HW robu.in theke o nite paren. description e deuya aache

Piezoelectric disc price in market

@MREasyMaker

3 жыл бұрын

Dont know market price. you may check the given link.

the fog cool or hot?

@MREasyMaker

3 жыл бұрын

Little cool than the sanitizer temperature.

@b-beluga4510

3 жыл бұрын

@@MREasyMaker so it is not vapor? Ohh...so it sprays water in fine sprinkles?

@MREasyMaker

3 жыл бұрын

@@b-beluga4510 yes. Sprayer

Is this mist cold or hot?

@MREasyMaker

2 жыл бұрын

temperature as same as water

Saw the price and iam flabbergasted 1,2k some even goes for 1.5k lol... For what?

Only white thing

You got cheated by online youtuber . You can buy full diffuser set at that price.

প্লিজ নাম্বার দেন ভাই।।

@MREasyMaker

2 жыл бұрын

mreasymaker@gmail.com e mail korun.

@abdulmateenbabar

Жыл бұрын

@@MREasyMaker price in Pakistan