It's expensive, its hyped. And it delivered! Removed stubborn wheel lugs torqued to 150 ft lbs. Commercial mower blades. Tractor lugs... It's a surprisingly powerful unit. More powerful than my 450 ft lbs air gun. I'm happy with it

@OTFOGZ33

2 жыл бұрын

Just got one in love other one was 9 inches lmao 🤣😂😆😆😆

I used kzread.infoUgkx4ynqaujg7rZKFapA8s29kTpRszJGa3-K this for the first time today to replace the front wheel bearing on my rwd 98 dodge dakota. This had absolutely no issue removing or reinstalling the lug nuts and it took off the axle nut without any struggle. Sounds like it's got some muscle to it. Time will tell

The 4th setting is auto, uses as much torque as it needs to get the nut off but slows down immediately after getting the nut off to prevent it from flying back and hitting you. But the 4th one only uses 30ft lbs to tighten nuts, if you want it tighter you have to use 2 or 3.

@dominicwhite6529

Жыл бұрын

Exactly but did he just say m12 at the beginning when it's an M18 lol oh I'm a professional independent mobile mechanic by the way

This thing is a beast. If you are just a DIYer like me who lives in the Midwest so we have to deal with rusted bolts all the time, this is the right tool for you. I do have the height torque that I’ve only used like once because the rusted ball bearings of my Chevy equinox was too much for the mid-torque, but other than that this works like a charm. I was lucky that Home Depot had a Black Friday sale last year on their “mechanic’s kit” and I got this one, the high torque, their m12 cordless ratchet, 4 batteries (2 M18 and 2 M12) and a charger for $700. Totally worth it.

Nice video man. From my understanding the 4th is used for both. When loosening, it’ll sense when the bolt is loose and lower the rpm so you don’t swing your socket across the shop, and when tightening it’ll stop at 20-35 pounds as to not over torque anything

I’m glad you got this one and made a review! I just got the high torque (1400ftlbs) and I love it. I use my stuff at work though too, and never know what I’m going to run into. I love all of my Milwaukee stuff! Hope you’re well, Russ! 🤘🏼

@Russellscottx

3 жыл бұрын

Hey man thanks for watching! I’ve got a couple more reviews coming on stuff I picked up but I’ve gotten bit by the Milwaukee bug haha I’ll pick up the high torque some day but for now I think this one will do a good job!

@watchmanexpert

2 жыл бұрын

@@Russellscottx question are u happy with the impact ? I want buy one but no sue if the mild or high torque is to work in my Nissan Titan , we got snow and road salt so is some rust on my truck

@raycamba

2 жыл бұрын

@@watchmanexpert Probably high torque man, but mid torque is surprising!

@jsaldana1227

Жыл бұрын

@@Russellscottx What 1/2 socket are you rocking in the thumbnail?(:

Oh man. You’re really going to like this one. I bought the 3/8” and 1/2” on a buy one get one deal my local Home Depot was having. They don’t play around and will remove just about everything you need them to. The three LEDs were a major upgrade, too. They feel quite a bit lighter than the Gen 1 mid torques. I typically use a 6.0 high output battery on mine and was able to pull semi lugs with it. Seriously impressive tool. Another great video, dude!

@kennguyen693

2 жыл бұрын

If it can pull semi lugs. What would be the purpose of the high torque? Like what is that one even for

@AlexMaysonet

2 жыл бұрын

@@kennguyen693 The mid torque has the power to remove them but you will greatly reduce the service life of the tool if you use this to remove high torque fasteners like that all the time. Just because you can, doesn’t mean you should. It’s the wrong tool for that job. You really should be using at least a 3/4” gun on stuff that large that’s torqued that high.

Great video! What brand of impact sockets do you use?

Man your really making me wanna pick one of these up now lol

@Russellscottx

3 жыл бұрын

Haha just being a good influence here 😝

I just picked up its a banger

Yh so the last setting will automatically stop when it feels friction so that you don’t strip bolts I actually thought settings 1-3 was for taking of bolts and the last one for delicately fastening them.

What camera you using good ass quality

Love your videos ... although wish you kept the mk7. With that said... Milwaukee is good brand have a bunch of their stuff and use then for years on my cars. The 4th setting on the gun is actually for tightening the first 3 are to loosen stuff. The 4th is there so you dobt overtorque the nut/bolt

@Russellscottx

3 жыл бұрын

Thanks for watching! That’s confusing though because the loop around the bolt has an arrow going to the left which made me think it was for loosening 🤔

I like the hoodie 👍

Do I need this? I have the m12 stubby and m18 high torque. Don’t have a mid. Don’t need to spend $200 right now.

Why doesn't the mid torque have one key?? Will the come out with it??

I have the big daddy half inch and the compact m18 half inch. Kinda beat.areoujd the bush on the mid torque lol

When did you take the wrap off the S2000?

@Russellscottx

3 жыл бұрын

A longggg time ago lol

I love my Milwaukee tools just added the brad nailer to my collection this weekend

@Russellscottx

3 жыл бұрын

Thanks for watching teddy!

@martylucas8557

2 жыл бұрын

Teddy, I did the same thing. About 5 months ago I purchased the M18 Fuel Gen 2 18 Gauge Brad Nailer. About two months ago I added the M12 23 Gauge Pin Nailer. It’s pretty awesome! I highly recommend you check it out.

Today September 1st 2021, the Milwaukee mid torque + 5ah battery is selling for (219 +tax at home depot). [The dewalt mid torque + tool bag + 5ah + 3/8 dcf890 150 ft/lb impact wrench + charger dcb107 ] is selling for 250 +tax at Lowe's...

@Alexanderofthe9th

2 жыл бұрын

Damn i ordered the mid torque for 219 i didn't know Dewalt had that deal going on tho

@dirtcheapmedia3390

2 жыл бұрын

What is the warranty on the dewalts

Does the tool make somewhat of clunk when being flipped up and down ? I just want to make sure I didn’t buy a defective tool thanks.

@danielgordon6412

Жыл бұрын

Mine does. I just got it. Looks like the anvil has some room slightly. I think it’s supposed to. Idk. Is yours working right

How has this tool held up for you? Any bolts it couldnt take off?

@Russellscottx

2 жыл бұрын

It’s been great, no issues at all, has always gotten the bolt off

@fireonmytarget8937

2 жыл бұрын

@@Russellscottx Awesome thank you, I'm going to pick one up!

@anubis8680

Жыл бұрын

The High Output model got an internal redesign and was failing right out of the box at 100/120 ft lbs of ratchet action. I take it this one is ok? Have you ever had to hold the trigger down for more than three or four seconds?

Its called a variable trigger

“I like how nice and slow it is when it busts the nut” 😂😂😂😂😂

@DiegoJimenez-et2qt

2 жыл бұрын

Beat me to it!

This impact also is equipped with auto stop feature to prevent over tightening

Number 2 puts the nutz at 100 pounds

9:13

I just got one yesterday...tried it out today. To be honest, I am highly disappointed with it. It is no stronger than my old 2662..that is rated at 450 breakaway...and this is rated at 650. I tested them side by side and the 2662 would break the same max amount the 2962 would. It is smaller than the 2662...but I am going to return it.

@seabass22

2 жыл бұрын

Have to use high output battery

@jimmywarren6685

2 жыл бұрын

@@seabass22 Nah...high output battery only makes about 25lbs of difference. This tool just will not meet spec...and I suspect a lot of them won''t.

@seabass22

2 жыл бұрын

@@jimmywarren6685 okay just wondering. I had it in cart and was going to purchase but order wouldn’t go through. Wound up changing my mind. Think I should be good with the m12 stubby and m18 high torque.

@commercialrefrigeration9240

2 жыл бұрын

We benched tested it and it’s quite a bit more powerful than the 2662 side by side and we didn’t even use the high output battery. I would definitely take it back may have something wrong with it. We replaced all our 2662 with it now and had nothing but good things to say about it. If it’s a really rusted super large bolt we will use the big boy but really haven’t needed it yet since we started using this one. It’s a very impressive tool now I don’t know about purchasing the Gen 3 because it’s only 250 ft lbs of torque and yes I refuse to say nut busting lol. Good tool overall doesn’t replace the high torque in every situation but most of them.

@jimmywarren6685

2 жыл бұрын

@@commercialrefrigeration9240 It went back...long gone...got a full refund and they let me keep the battery 5AH battery that came with it. I was disappointed in the tool, but getting the battery for free helped my feelings...a lot!.

Wow man you could atleast like some of the comments your subscribers let you know what the fourth setting was since you didn't know. So atleast acknowledge them I'm sure they would appreciate it.

I just got this impact with 2 5.0 mah batteries and a charger for $299 and they threw in a $50 gift card

I'm only buying it if makes my garage sound like a Nascar pitstop

9:12...yeah that's exactly what she said**. Now I'm going to go buy me one too. **SIDE NOTE: No nuts were actually busted during the making of this video.

@wendellgreenidge3362

Жыл бұрын

Lmao

Sharing your uneducated opinions is the only reason I did not like this video. 👎I also just purchased one of these 2962-20 with friction ring and 💋like it very much. 👊😃👍

Why did you get the 1/2” over the 3/8”?

@Russellscottx

2 ай бұрын

I already had a 3/8 lol

@seselapaz

2 ай бұрын

@@Russellscottx so since you have both which do you recommend?