Hey Edo, you are my favorite channel. Is it normal that the Boosted gets hot blade after 10 minutes using it?
@recreate3204 Жыл бұрын
Hi, I have a question. Do you think buying the Kemei 2600 and upgrading the motor to 6500 or 7200 rpm with wahl blade would be a good investment? I thought about building from scratch, but buying the KM2600 with a new motor is cheaper and I already have the wahl blade. I was also considering the KM1986 but i don't like the full metal. Also, is it possible to make a video on what you think are the best chinese/aliexpress clippers and trimmers? Thanks again.
@edounboxingofficial
Жыл бұрын
Yes, it will be good investment
@recreate3204
Жыл бұрын
@Edo Unboxing Official Thank you. Do you know of one that takes wahl blades that also has a screen but has a similar motherboard and removable battery like the 2600's? The 2600PG has the battery attached to the bottom of the motherboard.
@FaTaL1h Жыл бұрын
I heard Stylecraft is making the Rebel quieter. Let hope because these are way to loud
@edounboxingofficial
Жыл бұрын
That would be very good
@breakan Жыл бұрын
Well explain good man
@edounboxingofficial
Жыл бұрын
Thnx bro
@steviejojo3448 Жыл бұрын
just bought the super torque motor... gonna throw it into one of my magic clips
@dmosboss758
Жыл бұрын
how that go? noisy?
@steviejojo3448
Жыл бұрын
@@dmosboss758 not to bad, slightly louder but the rpm and the torque have been worth it
@dmosboss758
Жыл бұрын
@@steviejojo3448 slightly sounds good...what about heat and blades?..i was choosing between 7200rpm super torque and eBay 6500rpm...the seniors run a 7200rpm motor too and people say it get hot fast
@steviejojo3448
Жыл бұрын
@@dmosboss758 ive got a faper blade on it with a ceramic cutter.... it gets warm to the touch but its never been burn kinda hot yet. i had 12 clients yesterday and used it the whole day.
@dmosboss758
Жыл бұрын
@@steviejojo3448 thanks...which ceramic u use? stagger? and which company..ill order asap..thanks
@saidzueke4782 Жыл бұрын
Can you try wahl blades on them?
@edounboxingofficial
Жыл бұрын
I don't have wahl blade anymore
@benin4life Жыл бұрын
When are you going to unbox Goblin or instinct?
@edounboxingofficial
Жыл бұрын
I have no idea
@dademau5barber Жыл бұрын
Unboxing Stylecraft Rogue and Ergo modular? 😎
@edounboxingofficial
Жыл бұрын
I don't think so
@charddelarosa9001 Жыл бұрын
👌🙏🤭🇵🇭✂️
@edounboxingofficial
Жыл бұрын
🙏🏽🙏🏽
@DIEGO-sl7cs Жыл бұрын
I have the prescelta 😃
@edounboxingofficial
Жыл бұрын
And do you like it?
@DIEGO-sl7cs
Жыл бұрын
@@edounboxingofficial ufff yea i love it it's like a rebel but so more cheap ;)
Пікірлер: 27
Hey Edo, you are my favorite channel. Is it normal that the Boosted gets hot blade after 10 minutes using it?
Hi, I have a question. Do you think buying the Kemei 2600 and upgrading the motor to 6500 or 7200 rpm with wahl blade would be a good investment? I thought about building from scratch, but buying the KM2600 with a new motor is cheaper and I already have the wahl blade. I was also considering the KM1986 but i don't like the full metal. Also, is it possible to make a video on what you think are the best chinese/aliexpress clippers and trimmers? Thanks again.
@edounboxingofficial
Жыл бұрын
Yes, it will be good investment
@recreate3204
Жыл бұрын
@Edo Unboxing Official Thank you. Do you know of one that takes wahl blades that also has a screen but has a similar motherboard and removable battery like the 2600's? The 2600PG has the battery attached to the bottom of the motherboard.
I heard Stylecraft is making the Rebel quieter. Let hope because these are way to loud
@edounboxingofficial
Жыл бұрын
That would be very good
Well explain good man
@edounboxingofficial
Жыл бұрын
Thnx bro
just bought the super torque motor... gonna throw it into one of my magic clips
@dmosboss758
Жыл бұрын
how that go? noisy?
@steviejojo3448
Жыл бұрын
@@dmosboss758 not to bad, slightly louder but the rpm and the torque have been worth it
@dmosboss758
Жыл бұрын
@@steviejojo3448 slightly sounds good...what about heat and blades?..i was choosing between 7200rpm super torque and eBay 6500rpm...the seniors run a 7200rpm motor too and people say it get hot fast
@steviejojo3448
Жыл бұрын
@@dmosboss758 ive got a faper blade on it with a ceramic cutter.... it gets warm to the touch but its never been burn kinda hot yet. i had 12 clients yesterday and used it the whole day.
@dmosboss758
Жыл бұрын
@@steviejojo3448 thanks...which ceramic u use? stagger? and which company..ill order asap..thanks
Can you try wahl blades on them?
@edounboxingofficial
Жыл бұрын
I don't have wahl blade anymore
When are you going to unbox Goblin or instinct?
@edounboxingofficial
Жыл бұрын
I have no idea
Unboxing Stylecraft Rogue and Ergo modular? 😎
@edounboxingofficial
Жыл бұрын
I don't think so
👌🙏🤭🇵🇭✂️
@edounboxingofficial
Жыл бұрын
🙏🏽🙏🏽
I have the prescelta 😃
@edounboxingofficial
Жыл бұрын
And do you like it?
@DIEGO-sl7cs
Жыл бұрын
@@edounboxingofficial ufff yea i love it it's like a rebel but so more cheap ;)
@edounboxingofficial
Жыл бұрын
@@DIEGO-sl7cs yes