I've always maintained that if I hit the lotto I will be taking my collection of BMW's to Reddish for a full on resto!

I could imagine reversing and taking a 20 mile detour to avoid a puddle 😁

When the guy restoring your car has a favourite bolt you know he's got that attention to detail 😆. Great work

@RedishMotorsportbmw

Жыл бұрын

So true!

@jhanraycorpuz6245

Жыл бұрын

@@RedishMotorsportbmw I’m high hungry I want I’ll GM 😅MISS YOU 979

@jhanraycorpuz6245

Жыл бұрын

The Uu e be yet You L

@therealvictorpo

Жыл бұрын

Here 1:24:47

@markg8703

Жыл бұрын

😊😢🎉l m BM l q V.😢

Never seen such a professional and amazing job! Incredible

Superb attention to detail, I've had my e92 worked by these guys, can't recommend them enough

@RedishMotorsportbmw

Жыл бұрын

Many thanks for your kind words.

Love the attention to detail and level of knowledge to even be able to identify incorrect fixings and features on a 15-20 year old car!

@RedishMotorsportbmw

Жыл бұрын

Thanks Mike, means a lot.

I've watched quite a few of your videos, but not recently. I'm just blown away by this restoration. No question that your skills have elevated to a very high level over the years of doing them. I think there must be a few people from the factory taking note. As the owner of a 2002 M3 with 35k kms, I've spent quite a bit of time underneath my car. It's pretty clean, since I've kept it off the road when the weather isn't nice, but this car is truly like new, even better than new. Considering how little extra work it would have been to drop the engine and transmission, I'm really surprised that you "spent hours" masking, when you could have dropped them and cleaned them up to the same standard as the rest of the car. Anyway, I can't imagine how much this restoration cost, so I guess you had to draw the line somewhere. Well done!

Absolutely sick as fuck. I could happily sit in the cinema and watch this on a massive screen with a bucket of popcorn

@RedishMotorsportbmw

Жыл бұрын

Thanks for the support!

Superb! Wish we had one of you in the states

It's great that people are willing to spend the money to keep these lovely cars going

Wow this may be the only E46 in the world that isn't leaking! Beautiful job!

People admire nature landscapes. For me this is the best thing I can see in my life. My dream is a brand new E46. Insanely beautifull? Your work is WOW. Not enough words to express what I feel.

That is an absolute masterpiece, my anxiety as the owner come next mot would stress me out knowing they'll get metal pry bars to all that nice new powder coated suspension. Ud have to get them sign a damage waver before mot hahaha

This is brilliant. I am contemplating having my E30 M3 restored and this is so helpful.

Is there a business in the USA who can do this kind of work? It’s incredible

I would love to see the look on the MOT testers face when it goes in for a MOT. I’d imagine he would be spending more time admiring it than testing it. Fantastic work guys, definitely another one to be proud of.👍🏽

Took my M3 here and they were great! Definitely coming back when they get a gap.

@RedishMotorsportbmw

Жыл бұрын

Thanks Mark!

This really tightened up my jeans. Awesome work brothers

I am always fascinated, with your videos I have seen so many undersides of e46s and I dont even have one anymore. Wonderful work. pleasure to watch.

Absolutely stunning work.

Well done guys, excellent work carried out with true passion 👌👍

I like multi-part series. You're doing a great job, never bored watching.

Fantastic restoration, covered in extreme attention to detail

Wow amazing work ! I look the complete 2 hours so much details .. it’s better than new. Awesome 👏🏽

@RedishMotorsportbmw

Жыл бұрын

Thank you so much 😀

I've never seen some thing like this before!! Its absolutely amazing what you did!! Congrats!!

What an amazing job. Not a dollar spared. Better than factory new. I can't imagine how much this cost. I'm not a 2006 M3 convertible SMG M3 is worth the investment.

I'm so stoked to watch this.

@RedishMotorsportbmw

Жыл бұрын

Thanks!

This is what you call loving your job👍

Still here till the end mate, bloody French cars, never ends does it! I’d love to see you track it, with one/two modifications every time to see the time differences to see what mods do the most on track! Keep up the good work 👍

Very informative to me as I am currently restoring my own non m3 e46. I found lots of trapped corrosion between the floor and transission tunnel leg. Nice idea to cut it off rather than tackling from above which I started out doing.

@RedishMotorsportbmw

Жыл бұрын

Glad it helped

This is unbelievable! Amazing work!

@RedishMotorsportbmw

Жыл бұрын

Thank you very much!

@maxplank4083

Жыл бұрын

Amazing detail......

Absolutely stunning mates!

More than 2h of perfection! Awesome

@RedishMotorsportbmw

Жыл бұрын

Wow, thanks!

such beautiful attention to detail.

I watched all 2 + hours, I think it would be helpful if you could add the costs in stages to give viewers some idea on planning some work from your company. Total wow factor and it’s giving me insight on products I can use as Im working on my 08 R56 Cooper D👍

@lewiskrammer7157

6 ай бұрын

Absolutely 👍🏼

not one second to short. Great work

@RedishMotorsportbmw

Жыл бұрын

Glad you liked it!

Love the before and afters at the end of the video!

I wish I was this passionate about ANYTHING!!!!!! You sir are an amazing creature !!!!

Literally better than new.

If money does metter this is the way to go!! A low miles car as this deserve this!! Great video love the details.

@RedishMotorsportbmw

Жыл бұрын

Couldn't agree more! Thanks.

Absolutely stunning work, I’d be scared to drive it now 😮

Wow beautiful work.

Blimey! Really impressive but your work and finish always is. Nice video.

@RedishMotorsportbmw

Жыл бұрын

Thank you! Cheers!

Looks a cracking job!

@RedishMotorsportbmw

Жыл бұрын

Thank you

unbelievable car and work

i live in the US, but your care, and attention to detail is superb. well done guys. if was in the UK or anywhere near you. i have a '21 m2 comp id gladly take to you 15 years down the line!

@btwbrand

Жыл бұрын

This is the type of work you have done now rather than later. The process will be easier for both them doing it and your cost as the client.

@daevid21

Жыл бұрын

New cars will be junk in 15 years lol

@xzing7

Жыл бұрын

Enjoy now before everything goes electric. And fuel prices will be $500. A litre.

@xsteveoxsteveox

Жыл бұрын

@@xzing7 there is no physical way everything will go electric. California is learning that right now, the electrical grid can’t handle everyone having a 30 amp charging station in their garages. They have rolling blackouts daily. The infrastructure just isn’t there. No way small town Nebraska can handle it. It will never happen lol.

Beautiful underneath with those skid trays 🤠🤟🙏,wonderful break pipes

Great work. Can you advise how does one avoid having their car underbody getting to such bad shape in the first place ?

@sealslayer

Жыл бұрын

Don’t drive in the snow or rain 😊

Nice job looks amazing the mot man will love looking at that beautiful job

@rolyace0993

Жыл бұрын

You are right - he does!

@RedishMotorsportbmw

Жыл бұрын

Thanks!

Very detailed,

Yes,sir! This guy sounds like an MIT PROFESSOR.

nice diagnosis!

Very very, vvvbvvbeeeeeerrrryyyyy wellllll work

ths channel should have 10 mil subscribers

This is phenomenal! Can someone bring you any car other than a BMW for a similar underside treatment?

That is one lucky M3 ! 👍

Amazing work honestly some of the best restoration quality ive ever seen, and i watch a lot lol

Awesome !!! 👍

Awsome!!!

Really interesting to watch, but a bit depressing for those of us who own E46s that we think look ok for corrosion when we look underneath and now know they’re rotting away in all sorts of hidden areas 😢 Don’t think I could justify spending £31k to have mine restored, I’m afraid I’ll just have to move on when it finally crumbles.

excellent work gents. sadly the UK climate and roads aren't conducive for motor vehicles namely of the performance variety. this makes it a hard place to live in when one is a petrolhead to see our beloved M cars suffer the dreaded corrosion and rust issues.

@firdausHITMAN

9 ай бұрын

not withstanding the above we got that doucebag mayor of London Khan destroying the city with his bs ulez scam, 20 mph speed limit, narrowing of the roads and heavy penalties. people, we need to throw this greedy megalomaniac scum bag out and the likes of him and then start to put London back to where it belongs which is for the people and some of us petrolheads.

IMPRESSIVE!!!

Top job!!

@RedishMotorsportbmw

Жыл бұрын

Thanks!

Incredible work. Although, I was starting to get a headache towards the end. The underside is now better than new and 'perfect'. I do think this chasing perfectionism is a not always healthy - you could argue a perfect M3 is a brand new one or one with very low miles too. This car could be considered imperfect due to the fact it isn't original. How many miles did these cars manage before the boot floor area starts to crack from new? Slightly scatty reply as I'm in a rush. Thanks for the video :-)

@rolyace0993

Жыл бұрын

Boot floors could go early or last - depends how the car has been driven. My thoughts are that an SMG car, driven hard, will be the first to have the RACP, as the gearshift, especially on the quickest setting, really gives the rear end a kick. Eventually all will get some cracking - this one had no visible cracks but just the two hidden under the diff carrier bushes, which no inspection would have found, unless the diff carrier had been dropped of course, but who does that when buying!

@rolyace0993

Жыл бұрын

Some modifications were made by BMW on later cars but they can still crack.

im really impressed you guys take your work very seriously. I would bring my car to you guys but it's a Toyota!

Great work as always by James and the team at Redish. If I ever buy an M3, I know where I'm taking it for care and attention.

@RedishMotorsportbmw

Жыл бұрын

Thanks Wade!

Hello from Spain is a very job 👍👍👍😁😁😁 congratulations.

Absolute credit to you! This is beyond mind blowing.. Wish u took on ek hondas 😍

This time it is even more amazing! Next time I expect you to start galvanising components 😂

Investing in a dry ice machine will result in a huge time and labor savings. Just a suggestion. Nice work.

this is my dreamwork

This is amazing. Would love to do this to my e30 but…..it probably costs more than the car 😂

😮unreal!!! 👍👍🙌🙌

good stuff. Would have loved to hear the engine on your first fire up at the end!

Good man on the rear zink paint- as you said some internal wax after will be better then factory- far too many welders doing the bare minimum and not buying these products in and using them - aka means they will rust pretty sharpish .

@RedishMotorsportbmw

Жыл бұрын

Thank you!

Great work. I'm stunned the gearbox and engine were not at least dry-ice cleaned though. Why?

Nice 😮😮

Could you recommend a proper cavity wax? I did the subframe with your kit a couple of years ago and would like to keep the insides rust free

One day i'll bring my car there

El sistema de refrigeración en los autos mid engine hay que colocarle el refrigerante por bombeo a presión para que cargue completamente y no le queden bulbujas de aire,vas a tener q montar una bomba eléctrica para que le ayude a la bomba mecánica del K20 ya que no es de alto flujo,ya q eventualmente cuando logres hecharlo a correr cuando haga fuerza se va a calentar,pasa los mismo en los Toyotas MR2 cdo los haces K serie swap, el viaje de el agua es muy largo

Wow, I watched the whole thing!. Hypothetically or not so hypothetically, how much would it cost to bring a "brand new" BMW up to this standard?

What was the total for this whole process? Definitely a bucket list item lol

@TheIS300Kid

Жыл бұрын

Easily $10,000 with parts and labor

29 seconds in and subscribed !

I wish I knew how to do this type of stuff. My E90 needs it.

Beutifull

That's the way to do it! Absolutely superb! Congratulations! Maybe you could aqua blast the oil pan and transmission pan while you were there changing the oil and gaskets. Also I wonder if you also clean the engine bay compartment. If there's no secret perhaps you could mention the cost for each project you present...

@mikebader3863

Жыл бұрын

Has to be £30k all in for this, maybe more 😮

@arealsourapple

Жыл бұрын

@@mikebader3863 wouldn't be surprised. Over 400 pounds for just that pile of fasteners, and THEN the labor of zinc coating them, gives a good idea of the no compromises nature of the project.

@rolyace0993

Жыл бұрын

Gearbox when the clutch gets done. Sump pan when the rod bearings get done.

@btwbrand

Жыл бұрын

If you want to refinish the gearbox and engine surfaces without removal then consider CO2 cleaning. Vast majority of the surfaces will simply be dirt and grime covering the original finish.

Factory new!👏😎

I like twice! 👍🏻👍🏻TOPJOB

Wow

I just see the thumbnail and I would say everything is replaced

Can you tell again how you remove the wax or the products they used to protect the car underneath? Which products?

It will look very nice hanging from the ceiling in the owners living room.

Beautiful work, Redish. What is the price range for a radiation like this?

Thanks for the incredible video!👏🏻 Please tell me how much such a restoration cost? At least approximately. 🤔 I also really want to carry out a complete restoration of the car's undercarriage. 😊 I will be very grateful for the information👍🏻

How much for this to be done approximately. I know you said 4 to 8 weeks but how much an hour how many hours + parts?

Looks better than OEM BMW.

Beautiful, I can just watch this all day long! :D I have one question though, have you given any thought on hydrogen embrittlement when coating nuts and bolts? I'm currently restoring a bmw on my own, at a smaller scale but still. And I bought mostly new nuts and bolts from bmw but unsure how handle protecting on them, kind of worried about hydrogen embrittlement with anodizing, especially when it comes to suspension bolts of 10.9 and up so I'm not sure what route to go for there.

@btwbrand

Жыл бұрын

You obviously were not paying attention. They didn't anodize , they plated. Anodizing changes metal structure of aluminum, titanium, magnesium and other metals with no iron content. The finishes they used were all surface additive using powder coating and metal plating. Even the aluminum parts they had were not anodized but instead coated.

@peterolsson193

Жыл бұрын

@@btwbrand I guess you were the one that wasnt paying attention. Large pieces were powder coated and are a non issue but it doesnt matter if you call it anodizing, electroplating or whatever, the fasteners were protected by using electrolysis which releases hydrogen and in turn cause hydrogen embrittlement. There is no way around it except for instant heat threatment which is not 100% either.

@thebigmacd

Жыл бұрын

​@Peter Olsson OEM bolts are electroplated. This isn't a nuclear reactor. Cars drive around just fine with undercarriage bolts half rusted away.

@peterolsson193

Жыл бұрын

@@thebigmacd Nope, oem 10.9 and up bolts are never electroplated for this very reason. Bolt heads sure do rust but it will take a whole lot of rust for it to affect the tensile strength of the bolt whereas hydrogen embrittlement could cause a high carbon steel bolt to snap in half like it's made of glass. Not sure why people question this, its a fact that it happens. The question is how to alleviate the issue and still protect the bolts, zinc flake coating seems like an ok choice and probably what most oems use but doesnt seem very diy friendly and maybe not as long lasting.

Use 415 width chain... Its will give less chain friction loss and lighter... Definately been tried and tested up to 200kmh gps speed without any issue on over 30whp bike

Stunning work James 👍 Having this done now on E46 M3’s will almost certainly increase the value of the car & the owner has piece of mind for many many years!👍 I’d say there’s at least 40/50k worth of work there

@JohnyMcNeal

Жыл бұрын

If they removed all the rust in almost full percent then 100k km if driven in winter too. If not driven during winter when chems are sprayed onto the road (road salt and so on...) then I would say definitely 2-3 decades. Only my opinion tho, its impossible tho to remove 99-100 percent of the rust this way.

Put spacers on the frame bolts then u have space for the brake boost