Unbelievable DIY Project: Build Your Own POWER SUPPLY From An OLD Computer!
Тәжірибелік нұсқаулар және стиль
This video will show you step-by-step how to create a powerful 12V power supply from an old computer. Learn how to dismantle the tower and identify the power supply, as well as how to test it to make sure it works properly. Discover the benefits of using a power supply from an old computer and learn how to upgrade it to increase the power provided. Finally, we'll give you safety tips to ensure you have a safe and successful project.
I do my best to make every video easy for you to do it yourself at home where you don't have to pay repairman and save an extra money. So, If you liked this and this video was useful to you, hit LIKE and SUBSCRIBE! Thank you!
Пікірлер: 40
Well "said" 😃thanks very much for sharing.
Hola soy de Guatemala quiero sabe cómo se quita protección aún PC Xtech 700 con chip 7502c
Good idea, I also left the other supply lines like the +5V +3.3v -12v
@housewirestv
Жыл бұрын
sure, you are right. I needed only 12V, but we can put additional outputs like 3.3V and 5V.
Amazing stuff, keep it up!
@housewirestv
Жыл бұрын
Thank you!
Those powersupplys have only 12 Volts. You can not charge a battery with 12 Volts, you need 14.4 Volts. PC oversupplys do not work as Battery Chargers.
Cool stuff out there! Only you should put more output voltages like 3.3V and 5V DC!
@housewirestv
Жыл бұрын
great idea! In some of the future videos I will record a video with more voltages option from a power supply. Thanks for the tip!
@kymhaniford
Жыл бұрын
@@housewirestv Perhaps USB type 1 and Type c charging ports as well ;)
In 2005 when the internet was still in its infancy, no KZread but some electronics blogs, I had wanted a decent hifi but the ex was unwilling to pay for it and so I bought a second hand 4 channel amp for a car, a JBL subwoofer for a car and a set of Pioneer midrange plus separate tweeter and another midrange driver from an electronics store but how to power a 12 volt car amp which needed at least 15 amps and all the amps in the early ATX PSUs were on the 5 volt line?, the solution was I had 3 ATX PSUs wired in parallel giving me more amps on the twelve volt line and I even tried in series to push the 5 volts to 15 but in parallel was simpler and eventually scrounging through scrap I found a PSU with a decent amperage in the 12 volt circuit so reduced to 2 PSUs in parallel and the way it’s done is one PSU is the master and the others are earthed to the main master PSU which means taking out the circuit board and finding the case ground which was always on one of the PCBs mounting screws and you grind all the copper of that earth tab, check continuity and then join all the coloured wire’s together and check continuity again between the black wires and the case of the master unit and that’s it, had the PSUs mounted on a board vertically inside and entertainment unit which was supposed to be for speakers so the door opened but was covered with speaker cloth and in the other bay on the other side I mounted the car amp and for the power on lights I had two 12 inch Cold cathode fluorescent lights that people like to put under their cars after binging on the Fast and Furious franchise going to do a mod something like this just to power lighting in my bedroom again with some cold cathode fluros and some lasers what ever, always running out of USB ports.
Very nice
@housewirestv
Жыл бұрын
thanks!
NICE
@housewirestv
Жыл бұрын
Thank you !!!
Bonjour est-ce qu'on peut exploiter tous les ampères ou il faut une resistance de 3 w
Nice 😉👍👏👏👏👏👏
@housewirestv
Жыл бұрын
Thanks!
Great explanation. Keep it up!
@housewirestv
Жыл бұрын
Thank you ⚡⚡⚡
بهذه الطريقة لن تشحن البطارية ينقصك منظم الجهد لتثبيت التيار و الديود لمنع التفريغ عند الشحن .
@housewirestv
11 ай бұрын
yes, I totally agree with you my friend!
यह लोगोंको देखने केलिए व्हिडिओ बनाया है या खुद को देखने के लिए?
Nice Information
@housewirestv
Жыл бұрын
Thank you!
You need 13v or 14v to charge car battery not 12v
@housewirestv
6 ай бұрын
Exactly!
I follow your steps Can I use it with 4000w power? 4:18
@housewirestv
8 ай бұрын
You think if you have a 4000W power supply? Sure why not, you will have bigger current then.
@dahreetv505
7 ай бұрын
@@housewirestv No, I mean power that is suitable for cars
@dahreetv505
7 ай бұрын
@@housewirestv No, I mean power that is suitable for cars. Can this be used to convert from 120w power to power used in cars?
Great Idea ⚡⚡⚡ Turn Your Home into Smart Home Using ESP32 ➡ kzread.info/dash/bejne/dodrupqDha3Sd5M.html
Why so many black wires for the negative? You only have 5 yellow wires for the positive, so should only need five wires for the negative.
@housewirestv
Жыл бұрын
Good question! I suppose there are so many ways to do this, I didn't tried with that solution, but thanks for the tip!
Hlo
💯👍🇱🇧
@housewirestv
7 ай бұрын
💪💪💪
Hoye el vídeo es para ti solo
@housewirestv
Жыл бұрын
Sorry but I dont understand what you wanted to say, can you please try it one more time