UMX P-51D Voodoo on 4S lipo
Ойын-сауық
This is a video of my E-flite UMX P-51D Voodoo BNF pylon/reno racer model flying two full-throttle 3-minute flights using RDQ 4S 380mAh LiHV battery packs, stock motor and ESC/RX board, and a 2-blade 4.5x4 propeller. The model has a 493mm wingspan and weighs 136 grams ready-to-fly. Its top speed in a diving pass is 81mph measured with a radar gun, and highest in-flight RPM reported by telemetry is 26K.
More info here: www.rcgroups.com/forums/showp...
Пікірлер: 67
For those that don't have this bird, the plane hand-launches great and goes even faster without the landing gear installed! Great flying sir! I think you kept the "pedal to the metal" the entire flight!
Hello and thank you for this video! I made the same thing and it fly so nice! Although I bought bigger batteries and remove the little battery cap. And get like 8 minutes of flying!
That was some Awesome flying Chap!, I love your theme of putting 4s in these micro planes!.. I only found the UMX Voodoo today and realised a tiny 2s P51 exists and felt good about my Top RC Hobby 450mm P51D Mustang's conversion to 2s 12A ESC, that I just did, it went from 60 to 160 grams of thrust...I didn't test fly it yet though, I thought it could be a shelf queen for a few weeks before I smash it haha.. It can take 3s but I would need a bigger battery door for that.....but your vid is inspiring enough to go to 4s haha... Again, absolutely great piloting chap!...I aspire to do low circuits like you!
Holy crap! That thing is ballistic! And the sound of the air rushing by is amazing! 👍
Fuggin Bank and yank , turn and burn! I guess I’m getting those batteries 😂
Great flying! Perfect landing! Great stick skills!
I absolutely love watching you fly, and can’t thank you enough for all of the insight you have given me, and countless others. You are the man!
@Planekrazy1
Жыл бұрын
Thank you my friend, that means a lot coming from you. Watching you fly with your amazing skills is totally thrilling and awe inspiring. I look forward to fly more together in 2023 🍻
That looked like a fun Christmas!
Great looking plane!!
Dang Bro! That thing will hall ass to start with, yours has all the Horsepower, like every bit of it. Now to your Flying Skills, Bro you can fly the CRAP OUTTA VooDoo!!!!! I am glad I found this and your channel. I have one 300mA 4 Cell, all i need to do is make an adapter. I am going to try this, and if i get good results like you, I will fly it some like this. I would rather fly at half throttle and have tons of extra power to either get outta trouble or for some cool tricks, unless nosed straight into the ground at full tilt boogie, I don't think extra power has hurt anyone and having more power has gotten me out of some situations that could have ended in a destroyed Model. Hope ya have a awesome day! 🇺🇸🤠🛬✈️🛫🤙🏼
So sick!! Could you PLEASE do some more videos with this umx plane?? I like your flight style
Aloha brother, I aint seen anybody fly that voodoo like you. You got that down wide open all the way? Good job, Aloha.
Dang...! That was cool
Sorry just read in the description 81 mph very nice 😊
I have the bigger one ordered. I wondered if this will fly on 4s. I'll be picking one up now
Ok, you've talked me into it, I guess I'm going to have to find a couple 4 cell packs for mine 😛 But I'm not putting the wheels on 😉
@Planekrazy1
Жыл бұрын
LOL glad to be of service. 4S good for speed and landing gear removed will be even faster.
This set up should work for the Turbo Timber Umx evolution same electronics
@Planekrazy1
Жыл бұрын
Yes sir, those same 4S packs should work in the new UMX Turbo Timber Evolution but since that model uses a 3-blade prop which i have not tested myself, would suggest to be cautious and monitor amps and temps on the bench and go from there...
@geoff2911
Жыл бұрын
@@Planekrazy1 for sure thanks for the heads up
Please do some more flights of this guy!!
Man I need to get another one and try 4s
Not bad landing for a Bumpy area like that. I suppose you were out of safe gotta be..beautiful flying..
Great job man!! B55
@Planekrazy1
Жыл бұрын
Thank you for your kind comment and sharing with us on RCG.
Excellent piloting that is awesome. What protocol did you bind to I keep getting telemitry lost at about 200ft. Thanks for sharing that was awesome 👌
I didn't know you could use 4S. Wow, learn something. Today I have 2 of these by the way.
🔝🔝
I began watching your videos recently and you are awesome. Thank you for the info on juicing up the Umx voodoo I read in the Rc Groups forum you said it was a 4s 380 lipo then said "actually make that with LiHV packs", I am going to get the 4s 380 to clear it up for me was it a Lipo pack or Lihv?
@Planekrazy1
Жыл бұрын
Thanks for your nice comments and right on, I am glad you have a UMX Voodoo to play with. Sorry for any confusion regarding the battery chemistry. I use 300mAh and 380mAh LiHV packs from Race Day Quads. If you find a strong 4S lipo pack to fit into the Voodoo that should work great too. The RDQ packs i mentioned above fit without modding stock battery compartment. If you do run 4S (LiHV or LiPo) on this UMX Voodoo be sure to remove 2 blades from the stock 4-blade prop so as to not over amp/over heat the stock ESC electronics. Good luck.
Awesome set up bro and very nice flying, this thing is quick 😂 any idea how fast she is ? Very impressive man 👌🏼
@TheMrskydog
11 ай бұрын
Picture of radar gun showed 81mph. Pretty fast for a tiny mustang.
Just bought one of these and just searching for 2 blade prop modification and......😮😮😮 didn't expect this!! 😂 I love it, great flying skills there, but i have to ask is this little bird still alive after 7 months???
More videos of this plane!!!! Please🫡😎😎😍
Holy comodo dragon!!! That thing rips the sky wide open!!! Is that bone stock? No special aftermarket speedy motor?? Hot diggity dog!! Gots to get me one. I'll hand lauch it with out wheels and get some more speed out of this fireball😆
is that a micro bee on yur pic profile? the only one i have left that style is a great planes rifle and a few others hotliners, and yeah the p51 is one of my favorite umxs right now
@Planekrazy1
Жыл бұрын
Right on, glad you are liking the little Voodoo. The profile pic is of my old Avionik D99 which has not flown in years. I have a NIB Rifle that needs to built along with a few old school hotliners too. Sigh, so many planes, so little time 😊
@matthewwilken2051
Жыл бұрын
@@Planekrazy1 this is the second rifle ive had. its the samller one. i wish i would have bought one of the vodoo hotliners 15 years ago or so, you can still order em i think. i have a hobby king warmliner. not quiet as fast but similiar i havent taken out of the box yet and fininshed either/ pylon f3a f5a warmliner and hotliners and usually my favorite to flyi had a micro bee once i think it was from czech or ukraine its kinda like the samller voodoo. they can be hard to get down on the ground when it comes to landing you need alot space even for the small one sometimes
@Planekrazy1
Жыл бұрын
@@matthewwilken2051 Right on, i recall some of those older smaller composite pylon planes like the Stinger and Sokol. And definitely recall the Voodoo composite racers, ya i think they may still be available. Cool you have the smaller Rifle, the smaller ones always seem faster and certainly more thrilling. I do like the FunRay as a warmliner and how easily it goes together but pricy, especially for a foamie. Heard mostly good things about the HK Excalibur warmliner.
@matthewwilken2051
Жыл бұрын
@@Planekrazy1 the one i have is a G.L speedy. the fuselage is a little fatter in the front than i would like but yeah the stinger , voodoo, they have one thats a stishl name now. ive been thinking about ordering one since ive been kinda disapointed they havent really marketed ant fibergalss or composite planes anymore at least not here inj the states. seems like germany the place for that stuff
@Planekrazy1
Жыл бұрын
@@matthewwilken2051 That GL-Speedy with elevator in tail looks nice. It is funny how names get recycled. The pylon plane at Esprit Models named Still Racer used to be named Sokol. And the "Stinger" they sell now as a pylon racer it totally a different than the old speed-400 composite Stinger which was designed and built by Sergey Sobakin (of Avionik F5D and F5B fame). The 84cm Voodoo pylon racer is available from HyperFlight.
Wherever u are is absolutely beautiful. Also, did you do anything besides slap a 4s in there? I'm gonna pick one of these up soon.
@Planekrazy1
Жыл бұрын
Yes i removed 2 of the propeller blades from the stock 4-blade prop, so it ends up being a 4.5x4 2-blade prop.
I just got the Detroit Miss and the Spektrum 300mah 4s. Did you just cut 2 blades off the prop? Did it make a difference if so?
What balance modifications did you make to achieve such level flight in all phases while maintaining a neutral posture on the elevator control surface?
Did you find the 4s with jst, or use an adapter? I've been flying mine with no gear. It glides slow enough to catch no problem. Great video, thanks a ton!
@Planekrazy1
Жыл бұрын
For this 4S version i swapped out the stock JST power connector with an XT-30. Glad you are enjoying yours without landing gear, and able to hand catch it. Thanks for watching and your nice comment.
@brandonorlando4778
Жыл бұрын
@@Planekrazy1 inspired, my copy of your design should be ready tomorrow. Got a spare prop here to chop, and batteries on order. I'll shoot ya a link as tribute! Thanks again. Fellow RC pilot in FL👍🏽
@Planekrazy1
Жыл бұрын
@@brandonorlando4778 Right on, thank you and hope you enjoy yours as much I do mine. Fellow RC flyer here in CA. 4S coast-to-coast 😊👍
What prop are you using? Great video. E-Flite should bring a VOODOO S 4s version 😅
@Planekrazy1
Жыл бұрын
I am running the stock 4-blade propeller however with 2 of the 4 blades removed, so the actual prop is 2-blade 4.5x4 propeller.
Have you noticed any engine Wear from such a big battery also do they make adapters for this or would i need to soilder a new one in place ?
@Planekrazy1
Жыл бұрын
The stock 2150kv motor has been running great on well over 120+ flights now. I originally used a JST to XT-30 adapter but later found that replacing the stock JST connector to an XT-30 made took less room and made it easier to fit the 4S 380mAh packs.
Hi did u change the esc plug? Or stock jst?
Just wondering, did you actually cut the other 2 blades off? I need to try that. What was the purpose just wondering?
Would you know were i can find those battery packs?
How to you get your radiomaster to record highs. I’d like to see my max rpm/temps on my flights
@Planekrazy1
Жыл бұрын
When setting up Widgets and Screens in EdgeTX/OpenTX, choose telemetry value with a "+" next to it to show its highest value, e.g. eRPM+ and TFET+ telemetry values.
@colinellison5659
Жыл бұрын
@@Planekrazy1 thank you! I never knew. Simple and definitely in the manual somewhere 😅. Thank you kindly for the info!
One tiny muscle spasm of the thumb and you are buying a whole mouth of dentures…
@Planekrazy1
Жыл бұрын
Unfortunately I am all too familiar with such outcomes 😅
Stock esc??
@Planekrazy1
Жыл бұрын
Yes stock ESC/RX board in UMX Voodoo with 2 blades of stock 4-blade prop removed for 4S.
@jonnycatt138
Жыл бұрын
Ahhh sweet. Deff going to order 1 now and run on 4s. Thx for reply!...