Great and clear tutorial. You deserve a million views for this.

thank you so much for this. My Glock was jamming every shot before now it works perfectly!!

It's always a good day when AirsoftNLD says "Alright!" in the intro 😭🤘⚡ Great video bro!

@AirsoftNLD

3 жыл бұрын

Alright, Lolz haha thx

This airsoft pistol is a piece of perfection! 😍

@AirsoftNLD

3 жыл бұрын

yeah

@spacechimp3199

3 жыл бұрын

The damn slide on mine won’t even come off

@AirsoftNLD

3 жыл бұрын

I heard others with same issue i cant complain i never have trouble getting it off be sure rack slide first then try to get it off or slide lock it then hold pins down and release slide release :)

@spacechimp3199

3 жыл бұрын

@@AirsoftNLD believe me, I’ve tried everything. It gets stuck just at the start of the rails it runs along, after the hammer. Once it gets there, I have to pull the trigger at the same time as pushing the slide forward with force. Which is really something I don’t want to do because then I have to reset the trigger by hand by pressing down on the levers which can’t be good.

@AirsoftNLD

3 жыл бұрын

Hammer broken? Not wanna reset?

Thanks I shoved the wrong Alan wrench down the hop up lmfao this helped a lot

thanksss this video help me so much

@AirsoftNLD

2 жыл бұрын

Welcome :)

Great tutorial was the only video I could see the sight removed as I wondered if you can get a custom red dot

@AirsoftNLD

2 жыл бұрын

Dont know to be fair there prop special plates out there u can put on

Very helpful and one of the few disassembly videos for the 19x. Any lower frame disassembly videos out there? For the life of me cannot find a single set of instructions or a video for this model. Thanks!

@AirsoftNLD

3 жыл бұрын

lower is just to hard with the hammer. i always mess it up. so i suggest u dont remove the hammer just remove oil and such ;D

Great video

@AirsoftNLD

3 жыл бұрын

Thanks

Hey man, thanks alot! You immediately notice an icreased smoothness. I use it everyday and repetitively reload the mag, pull the slide and blank fire. Like a toy to figet with if that helps to give you an idea. How often would you recommend cleaning in my case?

I don’t know if I’m doing something wrong but when I do it the same way my Glock slide will go only a inch forward then it’s locked In place and won’t unlike in the video?

This video is amazing thank you very straight forward

What oils/lubricants go on what parts? I plan on getting a maintenance kit from Nostveritch and was wondering if I should just use silicon grease on all the moving parts. I don’t wanna mess up anything.

Love the video. I have a question my 19x is not feeding my BBs and the side stays back after the first shot. If I want to slide to move forward, I have to push it from the back of the slide. The funny part is if I have no babies in the magazine and dry fire, it works fine.

*One way to take the orange tip off* take the barrel out of the gun, boil up some water, then stick the barrel in the boiling water. Let it simmer in the water till you think it’s good (this heats up the glue and softens it up) take a pair of pliers or channellocks then pry it off. This is only if you can’t take the orange tip off from KZread videos you see. This is one way

Great video thanks! Airsoft first time user here. Can you recommend a durable speed loader that is easy to use?

@AirsoftNLD

2 жыл бұрын

Thx man i dont use speedloaders i got those free ones that sometimes comes with a gun they work fine for me

Is it silicon spray you are using to lube the parts? Sorry if its bad english😅 you are teaching in a way that i understand what you are doing. An how many times in a month do i have to clean it?

I have the same glock as the video i think but the two pins that you pull down when taking off the slide, my pins dont move at all and i put force on em. I also heard in a video they are just for show? but then how do i take off the slide

@skepticalpianist3266

28 күн бұрын

half blow back model is different than full blowback model

@malcolmnelson3402

13 күн бұрын

I think for the half blowback you have to take out the 3 pins to remove the slide but I’m not 100% sure

@leocolombo9166

11 күн бұрын

I haven’t tried but it looks like you need to unscrew the rod in the front below the barrel

Great trick using the slide stop to release the slide line wouldn't come off for the life of me the way I do it on my regular one by just sliding it forward by ha d!

Hey, great video. How do I take the slide stop/release and is there any extended slide stops that I can get??

@AirsoftNLD

2 жыл бұрын

i never done that so i cant really say man

The back of my gun was so dry compared to the front 😭 thanks man it was a Christmas present and the slide wouldn’t reset all the way after firing a round I’m guessing it just was not lubricated enough

@sethcolburn3275

Жыл бұрын

And same thing with slide release it would get stuck halfway instead of resetting

@sethcolburn3275

Жыл бұрын

You would have to physically push the slide forward after slide release

I got my Glock 19X from February 19

How îs holding up any parts broke? How many shots you put into it?

Hey I was wondering have you ever came across an upgrade for the Hop Up ? I'm trying to make this a bit better of a pistol for outdoor to get more distance on my shots.

@BenelliMF

2 жыл бұрын

Maple Leaf products.

@kohdetimetraveler

2 жыл бұрын

@@BenelliMF ya I figured that was kinda hoping theyd give a reference of maybe one they've installed that seem to work..

Great video, thanks! I have a question, when I load mine the bb keeps rolling out of the barrel, is that normal? Do you have an idea what could be the issue?

@AirsoftNLD

3 жыл бұрын

Change the hopup mine does same thing just play around with hopup and its gone

@guggaman

3 жыл бұрын

@@AirsoftNLD thanks, i will try that

I hope that you or someone who knows the answere is answering me 😅 So 1. that one black screw that holds the nozzle unit down and also the rear sight and that black plastic thing in the back. This one screw gets loose every time I shoot or just load the gun a few times. What do I do about it? EverOne seems to have no problems with that except me... and I’m trying to use lock tight right now and hope it helps. And 2. does it damage the hammer if I dry fire it? No gas, no mag or at least mag with no gas and bbs In it. Because I did it a lot and I think I took it to far... the triangular bearing on the hammer scratched of a bit of metal in the hammer housing and also bent the part where it sits in a bit. So does it come from me dry firing it without gas? Or am I just unlucky cus the screw that holds the spring to pull back the nozzle also just went loose and got fired out with one shot and the gun is still just a few days old but that’s not really my fault cus I didn’t do anything, never even took it apart before that happened...what am I doing wrong 😑??? P.S: does it damage the hop up unit if I accidentally double feed the gun (one round chambered in and reload again)?

@AirsoftNLD

3 жыл бұрын

lol idk about the screw i dont have that. that lock tight might be a solution. or maybe send it back lol. theres diffrent opinions on dry fire. i dont like to do it. some say it damages your pistol some dont. so i just dont do it. double feed should not be a problem i do that loads of times lol. maybe u can send it back for repair if its really that bad.

Hi @airsoftNLD, thanks for helping me out to learn how to clean my Umarex 19x. May I ask, by turning the spring during removal and installation, do you find it alters the hop up settings? will I have to pay attention to the orientation of the spring when I put it back to avoid having to set the HopUp again? Thanks in advance!

@AirsoftNLD

3 жыл бұрын

i never mess with hopup settings to be fair bc i shoot close range. so i cant answer that.

How do you remove the inner barrel from the outter? I’ve spent an hour trying but it’s so weird how it catches at every corner

@AirsoftNLD

3 жыл бұрын

I made video about it

@DaRealMotionMan

2 жыл бұрын

@@AirsoftNLD what video is it?

Dry firing GBB's wont cause more or less wear and tear than firing with a BB =) other then that good video dude!

@AirsoftNLD

3 жыл бұрын

Thanks

Hey I've had mine for over a year and have never been able to use it because it won't shoot.. I load everything but when I pull the trigger; nothing..at times BBs dow just roll out of the barrel as well.. do you have any suggestions?

@AirsoftNLD

2 жыл бұрын

Use gas and adjust hopup

on the magasine, do you put some silicone grease or silicone oil ?

Could you replace the trigger spring with a glock 8lb trigger spring?

heb je ook een video van de rest te demonteren e.d. ? toevallig laatst een glock19x gekocht (2e hands) maar is erg smerig met zand e.d. dus wil graag eerst alles eruit hebben voordat ik ga schoonmaken :)

Where do you get all the maintenance stuff?

Very new to the airsoft, my son recieved the redwolf glock19x for Christmas like the one in this maintenance tutorial, and worked great for 2 days and now will only shoot 4 times and it will be out of gas "greengas" and ideas

@garrettthorn5048

5 ай бұрын

Sounds like it's not sealing up correctly, leaking green gas out. I have no experience with that particular 19x, but most likely that's the issue

@garrettthorn5048

5 ай бұрын

Sounds like it's not sealing up correctly, leaking green gas out. I have no experience with that particular 19x, but most likely that's the issue

@garrettthorn5048

5 ай бұрын

Sounds like it's not sealing up correctly, leaking green gas out. I have no experience with that particular 19x, but most likely that's the issue

@garrettthorn5048

5 ай бұрын

Sounds like it's not sealing up correctly, leaking green gas out. I have no experience with that particular 19x, but most likely that's the issue

@garrettthorn5048

5 ай бұрын

Sounds like it's not sealing up correctly, leaking green gas out. I have no experience with that particular 19x, but most likely that's the issue

since u remove the orange tip do the barrel have threads in it to screw on a tracer unit and how did u remove the tip

@AirsoftNLD

2 жыл бұрын

Never removed orange tips

Why cleaning material did you use for this video?

Hey my inner barrel is a bit loose I can move it with pliers. Is that normal? My outter is very lose but I think it’s been like that from the beginning

My hammer assembly broke and I ordered a replacement. Now I’m sitting here taking way too long trying to put the hammer assembly back together 🤣

@AirsoftNLD

2 жыл бұрын

Had same issue lol but i got it to work again goodluck

@mattivirta

2 жыл бұрын

dont buy chinese shit umarex guns have lto easy life buy other korean or japanese brand gund. chinese not can made any good

@AirsoftNLD

2 жыл бұрын

Umarex is good

@mattivirta

2 жыл бұрын

@@AirsoftNLD yes have good if looking only but if use not have good chinese shit worst material alltime broken and i have 3 pistol and rifle and newer ewery not has good alltime broken need orden spare parts and come expensive than good tokyio maryui or hi-capa gun. or WE gun. lot lot better gund, i has buy after umarex chinese shit only good guality japanese or taiwanese factory guns, if WE glock cost 4000 B umartex same glock cost 2000 B and umarex can use 2 month and WE glock can use all life end. little bit different guality and material have. but if have 5000-7000B hi.capa or tokiyo marui guns can use all life and newer not have problems. money talk what have good and what have worst. 2000B double bell has super worst normal target shooting go broken less than 1 month. and 3 time orden new spare parts but last time i not orden more i figt this worst shit to trash. double bell and umarex have totally worst material and guality.

What grease did you use?

I think I commented on one of your videos before, I recently got a glock 17 gen 5, and I'm looking to get either a GLOCK 19X (6mm) or a GLOCK 45, which one seems more reliable too you?

Hello the plastic peice next to the outer barrel chamber thing is loose it's not coming out but it's very lose the more I shoot it the looser it gets how to fix it?

May I know how to put the recoil spring back together? The parts came apart...thanks...

I have the same pistol gen 5 but I can’t get my slide off can’t move the little locks at all any tips?

how did you remove the orange muzzle tip

When I was cleaning it the spring for the gas thing in the back the slide extended how do I get it back

Metal vs metal = greas Metal vs other material = oil

@AirsoftNLD

3 жыл бұрын

Oil = Oil doesnt matter to me.

@hazem2418

3 жыл бұрын

@@AirsoftNLD LoL

@ayandadlamini7838

3 жыл бұрын

@@AirsoftNLD 😂

Would've gotten this version if it was black but I prefer the g17

@AirsoftNLD

Жыл бұрын

Same

what lubrate product did you use

does this work for all types?

my slide gets stuck in the position you get when pull the side pieces down and then hit the slide release. it wont come off the receiver tho

Do I can put a real 19x slide on that BB gun? That frame looks solid to me

is there anywhere that sells glock gen 5 rebuild kits? My nozzel assembly doesnt have the pin on it for the spring

Hey so I just got this airgun. Sometimes when I shoot the bb doesn't come out and then I pull the trigger next and it shoots 2 bbs. Also sometimes when I notice it didn't shoot the BB will just be loose inside of the gun, I will then pull out the mag and the bb will fall to the ground.What am I doing wrong or is my gun defective? I just got some gun oil to put on the CO2 cartridges to see if that is the issue. Is my magazine defective?

@AirsoftNLD

Жыл бұрын

Idk man try some oil for the pistol maybe diffrent gas or adjust the hop up. Had issue where bb fell out idk try it

What did you do to take the orange tip off?

@AirsoftNLD

Жыл бұрын

I Never removed something that wasnt on the gun. We dont need them

Is paint wear on the barrel after about 1500-2000 bb's normal?

How often I need to clean my gun?

Plz get the Novritsch ssp1 to unbox and shooting 🙌

@AirsoftNLD

3 жыл бұрын

i would like to. but its kinda expensive. and its hard to get. due laws.

@tanoshicarclub5920

3 жыл бұрын

AirsoftNLD yeah, would be another awesome video tho 😎🤙

@AirsoftNLD

3 жыл бұрын

@@tanoshicarclub5920 yeah it will indeed. its 135 bucks to be honest its not a gun that i would buy for my colleciton. but you never know.

woah mine dosent even have those little switches to takr off the slide

@AirsoftNLD

Жыл бұрын

Weird

Would you please also disassembly Grip part. Thank you

@AirsoftNLD

3 жыл бұрын

No i will not

@hardhitt3r410

2 жыл бұрын

@@AirsoftNLD 🤣🤣🤣

When I try to take the slide off it only goes halfway and doesn’t come off

What type of grease or oils do you use to lubricate it?

@AirsoftNLD

2 жыл бұрын

Nuprol

I have an issue with mine i shoot once and it gets stuck halfway after the first shot then don’t wanna shoot after that

@AirsoftNLD

Жыл бұрын

Maybe use other gas. Or oil it up

what do you recommend for the oil/lube

@AirsoftNLD

3 жыл бұрын

What im using in video nuprol

Hey bro, should I get 19X or 17Gen5? Got a dilemma here. (keep in mind I have TM 17Gen3 and 18C)

@AirsoftNLD

3 жыл бұрын

Lol idk both? I like them both so idk

@clementjonathan2122

3 жыл бұрын

AirsoftNLD dude i have budget unlike you hahahaha, so wht do u like from the 17 and from 19x?

@AirsoftNLD

3 жыл бұрын

My man they both glocks all airsoft umarex glocks are the same only diffrent jacket. All on you. If u like the 19x then take that. I like them both. But i rather have gen 5 glock. Bigger in size.

@clementjonathan2122

3 жыл бұрын

@@AirsoftNLD ahh really? i just know that now, getting the 19x then. haha thx man

@jnsdm2442

Жыл бұрын

Eerst en vooral een leerrijke vlog 👌. Ikzelf heb 4 glock's : - 1 glock 17 gen3 - 1 glock 17 gen4 - 1 glock 17 gen5. En ook nog 1 glock 19X coyote. Ik moet kiezen welke ik hou,de gen4 of de gen5 ? Comments en antwoorden zijn welkom. 👋

What about the hop up? Any chance you could post a video on tuning it cause I cannot figure it out for the life of me 😂

@AirsoftNLD

3 жыл бұрын

just use a key to turn left or right. lol

@BobMarleyoneloveful

3 жыл бұрын

@@AirsoftNLD okay it took me actually looking at the hop up mechanism to realize with grate in the wheel controlled it 😂🤣 the little divit on the rim and the center of the loop on the inside don’t match up

@AirsoftNLD

3 жыл бұрын

Hehe

@BobMarleyoneloveful

3 жыл бұрын

@@Blepoo that wasn’t the problem the problem is when you take it apart to clean it you’ll more than likely fuck up where you had the hop up, and the gear itself is ridiculous but I figured it out 😂🤣

This might be a stupid question but I'm a total noob. I just got this gun for my birthday, and I adjusted the hop up but couldn't figure out how to take the little tool out could you tell me how to do that?

@AirsoftNLD

3 жыл бұрын

I have no idea what you mean with little tool sry lol

@richieanthes8529

3 жыл бұрын

@@AirsoftNLD That's alright thanks for replying. lol

@VG278Q

3 жыл бұрын

I think they ae talking about the small alan wrench

@richieanthes8529

3 жыл бұрын

@@VG278Q Yeah. Thanks that's what I was talking about I got it out. Thanks!

Do you have a video to disassemble the frame?

@AirsoftNLD

2 жыл бұрын

Yes kzread.info/dash/bejne/nqCWl5WHYq_gl9I.html

my slide is messed up,the triggers mushy and idk why, i cant take off the slide

I need help fixing my slide. I shot mine a couple times and the slide got stuck backwards and won't go forward, plz help

in like mid of the video the guy took out the little slide piece idk how it fall out on my gun but can someone tell me if its important or not and can i replace it with something

I know I’m late but is it the same for the co2 half blow-back

@AirsoftNLD

3 жыл бұрын

No idea i dont own one

@afifnasseredine4334

Жыл бұрын

Jayden did you ever figure out how to take it apart?

question: why does my 17 gen 4's outer barrel moves back and forth and creates rattle? when slide open.

@AirsoftNLD

3 жыл бұрын

Idk all has it

@razvan19010

3 жыл бұрын

My 19 gen4 does the same, just got it and done the first shoot test, its a lil dissapointing

@ComradeDogger

3 жыл бұрын

I'm maybe late but it's designed that way since the real glock barrel tips up to load the next bullet more easily but I think most of the handguns has it. Although it won't affect your aiming since the inner barrel won't move

@mattivirta

2 жыл бұрын

@@razvan19010 because have chinese shit gun, cheapen gun what have and worst material and not made good.

i have one but it wont work for mines

When I try to take the slide off I do everything you do, but the slide will only move about an inch forward and then it will not move forwards, only backwards to make the slide normal again. Do you know why this is happening or how I can fix it?

@chaseissalty118

2 жыл бұрын

I haven’t yet tested the gun to see if it can fire since I just bought it and I’m all out of green gas (waiting for it to arrive) and I’m scared something may be wrong with it

Has anyone run into an issue where the gun jams after 2 or three shots? I’m pretty sure it’s a mag issue. I can use another mag and it doesn’t do it. Also this just started, and it’s only the one mag that does it.

I stretched that nozzle return spring ever so slightly.. trying to take it off to clean that one part. I ordered another spring.. I find it so hard to remove it neatly, any tips on putting a new spring on? Thanks

@Enitify

3 ай бұрын

1 year later and I'm assuming you put yours on? how'd you put it on without ruining it?

@codygottaglo

3 ай бұрын

@@Enitify It ended up being too damaged to reuse, I went ahead and purchased 3 more off a site and I paid way over price, but needed the replacement. Worth it. Just type, nozzle return spring for that specific gun and you’ll be set. But if you just trying to put it back on, just be careful hooking it slightly pull you won’t ruin it.

How did you get the orange tip off

@AirsoftNLD

Жыл бұрын

Never did

Is this the green gas version cause I cannot do it on mines

@AirsoftNLD

3 жыл бұрын

I only own gas pistols

How did you manage to remove the orange tip I'm having trouble taking it off

@AirsoftNLD

3 жыл бұрын

I did not. They dont come with orange tips. Only in america they come lol

@chriscobraairsoft5449

3 жыл бұрын

@@AirsoftNLD dammmn thats crazy fuck American laws

@AirsoftNLD

3 жыл бұрын

Maybe place barrel in hot water might soften the glue who knows

@Joe-yg9bt

3 жыл бұрын

You can buy a threaded black metal barrel for it on evike.com

The two side button won’t even go down so I can take the slide off 🤦🏻‍♂️🤷🏻‍♂️

@AirsoftNLD

3 жыл бұрын

Should work no issues here they do wanna go in sometimes

@drifting5672

3 жыл бұрын

Same here, I’m not trying break mine. Would you be able to make a video showing the internal function of the side buttons to get a better understanding?

@drifting5672

3 жыл бұрын

UPDATE: Just use a little force by pushing with your thumb on the back of the slide while holding the side buttons down. I guess I’m just used to cheaper airsoft guns. Comes off easier the more you take it apart I feel like.

i have the co2 version blowback can i fit on the green gas mag ?

@AirsoftNLD

2 жыл бұрын

Not sure u gotta test lol

something is definitely wrong with my glock. when I try to take It apart it gets stuck on something

@AirsoftNLD

2 жыл бұрын

Maybe hammer wont reset?

Can the 19x cO2 version take the plastic bbs as well or no

@AirsoftNLD

2 жыл бұрын

This isnt co2 so i cant help you there.

I can’t for the life of me take the barrel off I slide down the little things and it looks like it gonna come off but it doesn’t slide off any tips

@AirsoftNLD

2 жыл бұрын

what?

Can i use ptfe lube

my half blowback slide doesn’t come off like that… the 2 “buttons” dont move

@AirsoftNLD

Жыл бұрын

Well this isnt half blow back is it :p

@timmuteearu8327

Жыл бұрын

@@AirsoftNLD i know, just saying that on hbb it doesn't work like that, wish it could tho

Tried taking the slide off the way you did and it got stuck. Now the barrel is stuck and won't let the slide go back all the way and I cant take it apart. Any ideas?

@AirsoftNLD

2 жыл бұрын

no idea just need some force maybe? i always lock slide back pull the 2 pins down and release slide.

@danthespaceman2779

2 жыл бұрын

@@AirsoftNLD I figured it out a while ago, just needed to pull the trigger and give it some force lol

E limpiado la mia ya dos veces, pero no veo q la goma del hop up salga. Held please.

@AirsoftNLD

2 жыл бұрын

no idea what this says

I have the steel bb version and this doesn't work. I cant pull down the notches

@AirsoftNLD

2 жыл бұрын

idk about the steel bb versions they are not legal here but most of them should just work like i show in the video. real life glocks you have to pull trigger then u can get the slide off with airsoft its the other way around hammer must be reset

I noticed that if I pull the trigger once more after the slide is back, it won't fully return to it's normal position. How do I solve this? The gun is new, just got it

@vgspotting5331

Ай бұрын

Itsnormal

I tried removing the slide but it only slides forward 1 inch and won't come off.

@AirsoftNLD

2 жыл бұрын

need some force somtimes. i always rack slide back lock it pull the 2 take down pins down and release slide.

Can you take the slide plate of Glock 18c ???

@AirsoftNLD

Жыл бұрын

ofc

Could I use that slide on polymer 80 frame

@AirsoftNLD

3 жыл бұрын

i have no idea sry

In the 1:30 what screw was there? I lost it

Does this work with the half blowback version?

@AirsoftNLD

2 жыл бұрын

No idea dont own one

How did you take off the orange tip?

@AirsoftNLD

2 жыл бұрын

I did not

What lube did do you recommend for the Glock 19x

@AirsoftNLD

2 жыл бұрын

The one i use

@660jorge5

2 жыл бұрын

@@AirsoftNLD which one do you ide

@660jorge5

2 жыл бұрын

@@AirsoftNLD use

@AirsoftNLD

2 жыл бұрын

The one in the video lol nuprol

What does dry fire mean im new in airspft

@joechairez7428

Жыл бұрын

Dry fire in an airsoft gun is when you are out of rounds and still shoot,shooting nothing but green gas

What oil do u use?

@AirsoftNLD

2 жыл бұрын

the one i use in the video lol nuprol pack