Ultrasonic Mist Maker Testing.
In this video we will show you a test of a mist generator or called an ultrasonic mist maker. This tool can produce mist when it is put into water at a certain height, depending on the type and strength of the mist maker.
The ultrasonic mist maker that will be used in this experiment has a diameter of 45 mm and a height of 40 mm. The required electric voltage is 24 volts of at least 1 Ampere and a mist output capacity of approximately 500 ml/hour.
In this test we used a tank with a capacity of 4 liters and a 220 volt AC power source to run the adapter. At a certain depth, you can see the mist coming out of the mist maker.
This ultrasonic mist maker can be used for various purposes, such as misting a paludarium or aqua terrarium, mini waterfalls, and a humidifier.
There are several things to note when using this tool including:
1. Do not turn on the mist maker outside the water because this tool will be damaged.
2. Don't put this tool too deep because the fog won't come out.
3. Remove the adapter and power source when going to hold it in the water.
4. Do not use this tool for more than 10 hours without stopping because it could damage this tool.
5. Don't hold the center of the mist maker when it's on in the water.
Foggy Paludarium Using Mini Mist Maker:
• Foggy Paludarium Using...
Foggy Bamboo Forest Aqua Terrarium:
• Bamboo Forest Aquaterr...
More videos on this channel:
/ hasnahkamilah