Thank you so much for the FOV tip! I've been playing at 86 for years and this fixed all my stutterring tysm

@infinitespace239

Ай бұрын

Glad I could help! Have fun o7

For information The reason for having worse FPS when you turn off the DLSS/FSR/CIG TSR is because the game will render your native resolution and in this video is full 4k. When you select Quality at 66% you are no longer in native 4K but you actually render 34% less pixels and the algorithm fills in the rest with "best" match of what the pixels should have been - this is why on some angles when you pan too fast or look at the edge of your screen when upscaling is enabled you see blurry graphics.

Thank you for explaining things as well as you do...priceless info in here...

@infinitespace239

Ай бұрын

Thank you mate. Cheers 🥂

Followed step by step, now im at 10 fps whenever im flying! Gpu: 3070 8Gb, Cpu Ryzen 7 5800X, Ram 32 Gb DDR4.

Thanks Bro, this definitely made my game a bit smoother o7

@infinitespace239

Ай бұрын

Glad I could help. o7

I've tried a LOT of various tweaks over the last 9 years to pull just a few more frames out of my older mid-range PCs, and yeah, the game has always been "optimized" to run best on the higher settings, which can be rough on some hardware, and often times you'll be lucky to come remotely close to getting the performance the telemetry page says you should. Considering biting the bullet and getting a more up to date system with one of the faster single core/thread speed CPUs, and more upgrade capacity than what I'm running (not just for SC, but definitely for SC xD)

Thanks!!!!

Thank you so much, the virtual memory tip for the drives made a huge difference for me on 32gb of ram. Thought that would have been enough but definitely going with 64gb next time. Just the virtual memory trick alone fixed my stutters and frame drops. Thanks again

@infinitespace239

Ай бұрын

Glad I could help! o7

Thank you Sir o7

photo mode for me does nothing to performance which is mind blowing, however, I do notice a small jump wheen turned off completely in cities. It is interesting because since I have figured this out I have left it on since the clouds look soooooo good. I have a 4070super with a ryzen 7 7700x. 36gb of ram. I used the dlss on 50 and direct11.

vulkan also comes with a fun little memory leak

LISTEN IDC WHO YOU ARE THIS WORKED SO FUCKING GOOD FOR ME, THANK YOU MAN!!!

@infinitespace239

23 күн бұрын

Glad it serves you. Youst a regular man, who explored a lot what will fix the broken game 😂

Great settings, but a couple of suggestions: Spreading the virtual memory across all of your drives, especially spinning drives if available, is just not needed. This affects the entire system, not just the game. This should be made to the maximum size you want on your fastest disk, which usually would be your system disk, and removed from all of the other disks.

@infinitespace239

Ай бұрын

Thanks for the tips! o7

@DylanSilvaYT

Ай бұрын

I have a question. If I do have two partition in the same SSD (one for the system and one for the apps...) I add VM in the one where i downloaded the SC. Does it really matter?

@infinitespace239

Ай бұрын

@@DylanSilvaYT You can only add VM for disk, not drive. Don't worry.

@DylanSilvaYT

Ай бұрын

@@infinitespace239 ahh got it now, Thank you sir

@SgtRauksauff

Ай бұрын

​@@DylanSilvaYT There really wouldn't be a difference because it's overall disk I/O that's being used, regardless of which partition things are on.

my max frames at Area 18 are 21fps, gonna see if your final suggestion with AMD cards improves it a little o7

I've found using dldsr to play at 4k or 3413x1920 and using dlss gives a better image for the same frame rate as playing in native 1440p. Also dlss at 1440p looks trash imo.

64gb ddr5 ram, 4070, 7800X3D. I turned photo mode clouds on and everything else all the way up and saw barely any drop in performance. 3.23 saw huge improvements for me with some stuttering issues, 3.23.1 when they turned off debuging shot it up even more. Im regularly getting 80+ fps in places now. 100+ in space.

@LordCritish

Ай бұрын

Are you sure you're not getting bad performance with cloud photo mode when on Orison, Hurston, or Microtech? It is pretty much guaranteed that it kills the framerate in these areas.

@SlyphGaming

Ай бұрын

@@LordCritish absolutely certain within the gameplay I have lol, I spend the majority of my time around orison. The only times im seeing severe performance drops is when i'm on a moon during a sand/snowstorm. I never go to hurston or microtech as they don't have any thing for me to need to go there. So couldnt tell ya there. Well let me change that, I sometimes drop to 60-70 FPS, but that isn't really noticeable for me.

@brandonstein87

Ай бұрын

I have a 4090 7950x3d 64 gigs of ram and locking the game on 7 3d cores and with photo mode I was getting better fps but in dog fights in clouds I was stuttering so I just turn them off for pvp and shit

@philipm5043

Ай бұрын

what fps are you getting in cities?

@giannis_toupolemou

Ай бұрын

Cap

You forgot about the Windows Registry Key - to set the game to High Priority for the CPU / i think this guide is awesome, just add the reg. key thingy & the game will run better :)

@infinitespace239

9 күн бұрын

Good tip. Thanks o7

Should i set the virtual ram max and minimum the same with 64g of ram? Or would be be 16k or 32k initial and 64k max?

@infinitespace239

Ай бұрын

Try booth and see what works for you best, for me 16 and 32 works best. 07

Upscaling ONLY looks better if you use DLSS. FSR and TSR do not create a clearer image

Very good video. One question: How to solve that part of the game files such as Shaders are installed on C: even the game has been installed on another physical (much faster) ssd? In my case the game has been installed on a raid0 ssd. Thank you!

@infinitespace239

Ай бұрын

Sadly I have not searched for that because all my discs are SSD.

@muhlaka123

Ай бұрын

@@infinitespace239 mine too but C: is not raid0 ;-) anyway thank you friend

@Scoso88

Ай бұрын

Good question. I’d like to focus the shader cache on one of the nvme drives but there doesn’t seem to be a way to change the directory yet, seems to default to the C drive

@infinitespace239

Ай бұрын

@@Scoso88 Yeah for now it is always C , sadly.

спасибо тебе. удачи

any info on HDR? I have an 800 hdr monitor, but do i want to use Auto HDR from windows settings enabled or disabled ?

@infinitespace239

Ай бұрын

No, don't use windows HDR, you have HDR in game set to 220 and 800 in game and try. o7

@PatrickFisker

Ай бұрын

@@infinitespace239 thank you

I have a 1070, and planet vokumtric clouds are best at high. You still get nicer graphics and better frames

The nvidia panel setting preferax peeformance simply forces the gpu to run at max speed and temp, does nothing for actual fps in game, and actually might even be worse as heat might throttle down the clocks. One thing I struggle with is HDR, when I enable it in SC the whole game is washed out. I am playing on a high end compatible hrd screen.

@infinitespace239

Ай бұрын

You have to set up HFR, try 220 and see max brightness of your monitor and set that for example 1000

🎉

If you make the virtual memory values flat 32000, it will not work. the values you enter must be the coefficients of 1 megabyte, for example 16384 and 32768

My "High precision event timer" was already disabled but i have no idea why as i have never touched it :P

@infinitespace239

Ай бұрын

That is cool, for both my PC and laptop was enabled. Maybe you had some program to improve your PC performance.

you welcome , let everyone enjoy the game

@natsucro2595

Ай бұрын

Deda rulz!

@Star_CitizenYT

Ай бұрын

@@natsucro2595

My star citizen it's all ok unless in vulkan but there's is a problem in Direct 11 where the planet ground texture don't load and it's very weird because the PC not stutter or something like this the fps stay stable do you know how I solve this?

@infinitespace239

Ай бұрын

You have to exit game, or change server that is the only fix, try also deleting shedder folder.

I need a settings loadout for a pos AMD Ryzen 5 5600 with a 3060😂 Well i will try your settings when i get home for work🍻

@infinitespace239

Ай бұрын

Have 😊

@TUROCK320

Ай бұрын

Brother 🤜🤛🤝

Any tips for +10 server fps? Cuz what good are 200fps if servers are a lagfest on 4.2Fps

@infinitespace239

Ай бұрын

You have to have a lot of friends and when you see them online right click and see the server with less people, lower the number it can be better but not always. Time R_displayinfo=3 to see server FPS, higher FPS, better server . o7

Look into disabling BITS in windows group policy settings...microsoft is using all of our computers to BIT-torrent windows updates to other people's computers in the background...I disabled the first 4 options and it stopped my computer from crashing every 15 minutes...

@infinitespace239

Ай бұрын

Thank you for the tip, will take a look at it ☺️

Thank you so much add more FPS

@infinitespace239

27 күн бұрын

Glad it serves you. o7

I believe CIG TSR looks slightly better than FSR while having similar performance

After the update , after 29 may I hope they will fix the video settings cuz is impossible I have high end pc and 50-60 fps in the city ..

@grim436

Ай бұрын

Wish I could get half that with my i7 12700, 3070, and 32gb of ram

i have an alienware x14 laptop , just bought the game , here are the specs : Monitor (connected) : 1440p CPU : i7-1200H (14 cores) ram : 16gb ssd : 500 gb GPU: RTX 3050ti (4gb) Any tips on how the performance can be improved in this scenario ?

@infinitespace239

Ай бұрын

Do what I did in this video, all and you will see improvement, especially with virtual RAM add double of what I did. o7

@parthpandey1920

Ай бұрын

@@infinitespace239 thank you

dx11 to vulkan is not switching without game restart, same as first quality option. dont set first quality option to very high, its for draw range quality, and with very high on planets it deeps 20 fps with 4090, leave on just high.

@infinitespace239

19 күн бұрын

To me it works without restarting. On 3090 there is no difference between very high and high. So I keep it on very high. o7

@ictr3ma255

18 күн бұрын

@@infinitespace239 land on aberdeen and check near pads where there a buildings, or near money from nothin site. o7

Disabling the high precision event timer for some reason prevents me from logging into the persistent universe. I can still login to arena commander game modes though. Is there a workaround to my issue?

@infinitespace239

Ай бұрын

I have not experienced that, sorry.

@j.d.4697

Ай бұрын

That's cause he doesn't even know what it does. He talks out of his ass recommending random bullshit he thinks improved his game. Your computer uses HPET to measure FPS among other things so your FPS counter will be wrong if you turn it off, possibly higher too, even though your frames don't go up.

@infinitespace239

Ай бұрын

@@j.d.4697 lol, how people can be arrogant and think they are the smartest: While HPET is an extremely precise timer (14.32MHz) which in theory would mean that it would perform the best, in practice when tuning your system for gaming it seems that HPET is too precise bogging down your machine. Gaming seems to benefit from comparatively less precise but more stable and consistent timers and ticks (TSC 3.32MHz) that have a beneficial impact on your percentiles and low FPS. In short, the level of precision HPET offers is not needed when gaming and will result in worse performance overall. In other words, some games can benefit some not, Star Citizen is definitely benefiting since is not optimized game. Good day to you.

@Carwash2

Ай бұрын

@@infinitespace239 Problem seems to have fixed itself. I probably just happened to be trying to login to the server at a poor time, and it was a coincidence. Game seems to run much better now. Tyvm.

@j.d.4697

Ай бұрын

@@infinitespace239 That's a lot of "seems" in your bogus excuse. I see you don't just make up tips as you go but reasons for them too. Nice job googling 14.32mhz though...

Anyone getting bad ghosting with fsr? Mainly on elevator doors and moving ship parts (foldable wings and such)

@infinitespace239

Ай бұрын

Yeah 👍

@skoomd4447

Ай бұрын

@@infinitespace239 how to fix it?

@dipperspace

Ай бұрын

@@skoomd4447 only dlss mitigates this disgrace

This tutorial did nothing for me except worsen my game's performances, after following your advices it run 8 to 15 fps top while I had a "solid" 50 fps before. And now I'm struggling to go back to the old settings ...

@infinitespace239

20 күн бұрын

Be sure to be on a good server, if you are on a bad server you will have even worse performance. If you did everything right it will improve your FPS no question about it. o7

Ive got a rtx 2080 and i9 and getting very bad stutters on ground places like goes down to 10 fps ive got 32GB ram too

@infinitespace239

23 күн бұрын

Yeah, sometimes happens like that. Did you applyy settings?

@BS-deadly

23 күн бұрын

@infinitespace239 I'm going to ill let you know if it works mate

Thanks for the info but how you see your fps?

@infinitespace239

Ай бұрын

Nvidia overlay. Or MSI afterburner.

@mitchelvandermeer1421

Ай бұрын

@@infinitespace239 i have a nviddia grafiek card

@TheMalkavianPrince

Ай бұрын

In game you can press ~ to open the command console and type/paste (without quotes) "r_displayinfo 1" or "r_displayinfo 2" to bring up some stats like fps, server fps, ping, session ID, etc. "r_displayinfo 0" will disable it. The client will remember previous commands across sessions, so you can just enter all of them, and just use up and down arrow keys in the console if you want to quickly toggle them. I've heard it said that this can cost you like 1-5 fps while displayed, but I haven't seen that myself.

i9 11900k 3080 32 gb ddr4 This game is crazy. In space I get 120 fps, on winners circle map I get 50 fps, but if I go near the trees on the ground I get 10-20 fps. I’ve never played a game where I can get both 120 and 10 fps lmfao

@infinitespace239

Ай бұрын

Yeah, in space there is nothing to render but your ship, on ground the entire planet and game is unoptimized. Hopefully it will get better when vulkan gets multi-core support.

so with Vulkan Beta i always crash after a couple of minutes of playing with out of memory error i have 32GB Ram, 5600x and 6650xt. anyone have this issue or know a way for me to fix this?

@JohnRoberts-yh3ep

Ай бұрын

This is a well-known problem and is affecting lots of us. Vulkan is still experimental and isn't fully implemented yet, so hopefully it will continue to get more work over the next few patches. The workaround for now is to stay with DX11.

@infinitespace239

Ай бұрын

Yes, and try deleting shaders catch from your user, local, app Data Star Citizen.

@TheMalkavianPrince

Ай бұрын

Ahh, deleting shader cache/user folder , the "turn it off and on again" of SC xD

@Mordekaiserize

Ай бұрын

Thanks all for the ideas and info

Wont water very high just tank fps?

@infinitespace239

Ай бұрын

For me it doesn't change anything, but do check your own PC.

I have 64gigs, do i need to use 16-64 ?

@infinitespace239

Ай бұрын

No, But you can still benefit. I set it up too on my laptop with 64 GB.

Star Citizen needs at least 32 the gigs of ram, but it doesn't use much more than that. I have a 64 and 128 GB system running and it really doesn't go much past 30 GB when running the game. A much much larger impact on game performance is the speed of the memory. The game runs faster on my 32 gigs of RAM DDR 5 than it does on the 64 gigs of RAM at DDR 4

Game still crawls on Ultrawide. Did these and still run at like 40-50 Fs at 1440 Ultrawide with 5900x, 64GB, 4080 Super, NVMe and installed on C: Drive

@infinitespace239

Ай бұрын

Yeah, sadly it has a long way to go.

jajaj cant even load into verse since 3.23.. cause long task shity bugg.. may i can invictus next year

@infinitespace239

Ай бұрын

Sadly, but I am able to enter the game always hmm strange.

stupid helmet but great tips, thanks

Motion blur drop fps a lot! Should turn off !

@infinitespace239

Ай бұрын

Yeah, as said I need it for videos, but rest, turn off.

You made a mistake 😅. To switch to Vulkan, you need to restart the game. Simply switching from DX11 to Vulkan isn't enough you must restart the game for it to take effect And the same goes when switching from Vulkan to DX11 😅. Visually, nothing changes in comparison the only difference is in performance and stability.

@infinitespace239

29 күн бұрын

Well I was playing over hot fix, so I didn't notice any problems after switching. I could instantly see fps going up after switching to dx11

4080 super, 7800X3D 32gb ddr5 but I get like 40-50fps so far in new babbage

@infinitespace239

Ай бұрын

Yes that is all right, I have almost the same with RTX 3090 and 5800x and with my laptop RTX 4090.

@yukiokouri9960

Ай бұрын

@@infinitespace239 ah, my buddies with 3080s are getting 60-90 in new babbage

Vulkan made everything slow for me & worse fps..

Be careful using his virtual ram trick on an ssd it can eat up its lifespan just buy more memory its dirt cheap right now especially if on ddr4

@infinitespace239

Ай бұрын

I said that in the video, and also I am using it for 2.5 years so nothing happened. It is not always used, only when your memory is full.

@geronimo5537

26 күн бұрын

the option is only used when the system ram is full. otherwise the allocated space is left unused. thus not shortening the lifespan from use.

Your settings messed up on of my hard drives

@infinitespace239

Ай бұрын

How ? It can't mess it up unless you did something else. Try again, hope you can fix it.

@j.d.4697

Ай бұрын

That's cause he recommends BS he doesn't understand himself. Go find other channels who have a clue and google the settings you changed to learn what they really do and what to do with them.

@xredrum41x

Ай бұрын

@@infinitespace239 nope followed it to exact instruction. It corrupted my drive and now one my usb ports don’t work. I don’t know how that’s even possible… I didn’t think these setting would do harm but beware that something can go wrong.

i have 4080 and 30fps wtff

@infinitespace239

Ай бұрын

Try these settings it will be better, of course if you are playing 4k and you are on Orison or Hurston or Area 18 or new Babage, that is normal. In space you should have 50-90. o7

@zacharypump5910

Ай бұрын

30fps flying around a city like new Babbage is normal even for a 4080. Out in empty space you should be getting way way more frames per second.. what CPU are you using? And how much system ram (not vram)? Unfortunately, right now this game is more CPU throttled than GPU throttled.

@alvarito740

Ай бұрын

@@zacharypump5910 i only have 16gb of ram and 9900k :(

@TUROCK320

Ай бұрын

EDIT : sry, i didnt Saw ur 16gb ram..🥹 Lol ive a 3060 with a 6 core CPU core i7 50fps on 4k 😂 WTF udooing duuuuuuuuude

@TUROCK320

Ай бұрын

​@@alvarito740😮 Its okeynbudy, add ram + overclock everything and run 80fps

❤Potato PC here ❤ ❤ 50 FPS on 4k monitor ❤CPU 15 years old - i7 5820k (3ghz) ❤32go ram 1033mhz ❤SSD cheap crucible ❤CGU 3060 🚀 ❤CM msi gigabyte 90€ And the ultimate trackIR camera 30€ Thanks for the guide i will test itn😂 For fuck sake, go give me your 5K€ config dudes !

I can't stand the mouth noises. You should use a filter to get rid of them

@infinitespace239

Ай бұрын

Already doing it, and it is still getting picked up. Loud keyboard and mouse.

Full of misinformation... You clearly know nothing about computers, at all.

@infinitespace239

Ай бұрын

Thank you. lol have a nice day.

@joshuadadad5414

Ай бұрын

Care to elaborate? If errors are made it would be good for us to know? Or is this just trolling?

@infinitespace239

Ай бұрын

@@joshuadadad5414 While HPET is an extremely precise timer (14.32MHz) which in theory would mean that it would perform the best, in practice when tuning your system for gaming it seems that HPET is too precise bogging down your machine. Gaming seems to benefit from comparatively less precise but more stable and consistent timers and ticks (TSC 3.32MHz) that have a beneficial impact on your percentiles and low FPS. In short, the level of precision HPET offers is not needed when gaming and will result in worse performance overall. In other words, some games can benefit some not, Star Citizen is definitely benefiting since is not optimized game.

@j.d.4697

Ай бұрын

@@joshuadadad5414 You do realize I will have to slowly watch the entire video, pausing at every point to provide info on what is wrong? Are you going to pay me for my time? I don't think so... You want proper info, do your own research, there are reputable channels you can find on your own, maybe search for the claims he makes like "HPET for more FPS" and you will see how full of shit he is. I warned you but if you rather believe someone who is giving you advice without being able to explain how it's supposed to work, on a video where they get money for clicks, then be my guest, I won't stop you from fcking up your computer settings.

Vulkan does not work on my system. SC crashes to desktop, and stays that way until you change it back to D3D 11 which you can't do because of the crash, which results in having to modify a file for rendering mode to switch it back to D3D11. And DLSS doesn't work in D3D11 and has no FPS gains to be had. - Fatal error message: [...evice/Vulkan/GPUDeviceVulkan.cpp:671 createDevice] (0xFFFFFFFD) Initialization of an object could not be completed for implementation-specific reasons Failed to create Vulkan logical device.

@infinitespace239

Ай бұрын

Did you delete game shaders in user folder app data, local star Citizen? And also user folder in game ?

@Fluke2SS

Ай бұрын

@@infinitespace239 Deleting shader folder and USER folder didn't do anything. Still instantly crashes after EZ Anti-cheat screen. Is fatal error: Yes - Fatal error message: [...evice/Vulkan/GPUDeviceVulkan.cpp:671 createDevice] (0xFFFFFFFD) Initialization of an object could not be completed for implementation-specific reasons Failed to create Vulkan logical device. Is reported bug: No Is GPU crash: No Is Timeout: No Is out of system memory: No Is out of video memory: No

@Aluiries

Ай бұрын

Change it back to DX 11 by doing the below. 1. close the launcher 2. Open this file for editing: %localappdata%\Star Citizen\sc-alpha-3.23.0_nzfk0d_0\GraphicsSettings\GraphicsSettings.json 3. Change "GraphicsRenderer": 1 to "GraphicsRenderer": 0 4. Open the RSI Launcher and relaunch the game

@Fluke2SS

Ай бұрын

@@Aluiries I know, but it still doesn't change the fact I can't use Vulkan and DLSS doesn't work with D3D11 and has absolutely 0 gains. Not to mention Nvidia's new driver 555.85 causes starcitizen.exe to stop responding or freeze now which then forces me to revert back to 555.22 driver. And the newer NV 555.85 driver brings DLSS 2.0 to Star Citizen. Well I can't use the new driver due to Nvidia, and I can't use a feature of the game because of Nvidia lol. Also Note: Vulkan works fine in other games such as Doom, Doom Eternal, and DLSS works fine in Cyberpunk 2077. So its not my system. Either it is Nvidia, or it is Star Citizen that is the problem. It is also more likely to be Nvidia that is the problem, because upon researching the 555.85 driver a lot of people are having issues in multiple other games that have been reported.