*25% off code: "DVN25" from James Havenga. link to the coating **Avl.kg/warped** as requested by many, I don't have a discount code since this was not a sponsored video but James Havenga gave us one here in the comments section "DVN25"*

@niketh2981

3 жыл бұрын

Hey man...love the vid... is there any possibility you could compare ceramic vs graphene coatings?

@WarpedPerception

3 жыл бұрын

That would be cool, yes I will check the graphene coatings out.

@troyd-motorsport9933

3 жыл бұрын

Awesome thanks for that! Spewing they didn't sponsor you. I reckon one of the higher quality brand ones would be silly if they didn't offer their products for comparison and give you a subscriber code ;)

@WarpedPerception

3 жыл бұрын

Well to be fair I didn't ask them because I really thought it was snake oil... I thought it was fake.

Thanks for the A+++ ceramic coating review!

@snoopy5736

3 жыл бұрын

Hello sensei

@TCPUDPATM

3 жыл бұрын

Y’all need to set up a mud vs ceramic coating race... Though cooking may not work on them 😆

@joshuamorehead6124

3 жыл бұрын

The man himself

@AsitShouldBe

3 жыл бұрын

i would see some test on working gloves (no cut precision type) and manual screwdriver, bye man.

@grovecitysirens_GCS

3 жыл бұрын

Hello when is the next time your cooking bacon with the Briggs and bacon

Can we just give this guy props for washing the control paint, drifting it, washing it, mudding it, and rinsing it... Then doing it all again with ceramic? Then the cut and microscope... Jesus! Please give this man a like!

@WarpedPerception

3 жыл бұрын

Thank you ! It was indeed a tremendous amount of work!

@tejaspadhye

3 жыл бұрын

@@WarpedPerception damn the editing and everything got me to su subscribe, couldn't resist! Glad I got this in recommended.

@livingadamman7994

2 жыл бұрын

Can you test their engine treatment STM3 in a worn out engine and then test before and after data ?

That microscope cross-section blew my mind, amazing work! I wonder how the cheaper "ceramic coatings" compare under a microscope.

@WarpedPerception

3 жыл бұрын

Thank you ! I've been trying to pull that shot off forever, the water jet is the only thing that made that shot possible.

@AutOdometer

3 жыл бұрын

Avalon King is the cheap coating lol. I just bought 3 packs for $35 each (it was a 50% off deal tho). They usually go for $50 to $70 for 2-5 year protection. One bottle should do a whole car

@WarpedPerception

3 жыл бұрын

@@AutOdometer that's a good deal

@bigsmoke4357

3 жыл бұрын

@@AutOdometer theres like 10$ ones for a bottle

@bdragonseven

3 жыл бұрын

@@bigsmoke4357 my suggestion is stay away from the cheaper brands. A true ceramic is a nightmare to remove if it's subpart quality gives you issue upon installation.

This is the best ad for ceramic coating I've ever seen. Now I'm considering getting some.

@hugacreeper69110

3 жыл бұрын

Always make sure you do your research one mistake and you’ll be sanding away highspots from ceramic

@johnd9357

3 жыл бұрын

@@hugacreeper69110 you can buff it off with some meguiers 205. No need for color sanding.

The microscope made this video for me

@WarpedPerception

3 жыл бұрын

I agree

Not exactly easy to do donuts in such a confined space. Great job.

@WarpedPerception

3 жыл бұрын

Not easy at all

@AsitShouldBe

3 жыл бұрын

The hardest part is do it when the dust is on the air.. 😁😁

@deon91

3 жыл бұрын

Feel sorry for the car on the otherside of the fence in the first donut clip

@WarpedPerception

3 жыл бұрын

@@AsitShouldBe it's only a guess where your car is at that point.

@AsitShouldBe

3 жыл бұрын

@@WarpedPerception 😁😁😁

Warp I don’t know who you are but I lost my dad at a young age aswell, and I wanna say I’m sure he’d be proud of you much love!!!

@WarpedPerception

3 жыл бұрын

How did you know ? , But Yeah ... It was rough, and my mom and my stepfather were very abusive.. the one thing I had going for me was it that I can build and fix just about anything growing up like literally. That's basically why I've had like 22 major surgeries. Thanks for the kind words

You know Ceramic coating on your car is the next thing on the bucket list after it passes this guy's test.

@JJS432

3 жыл бұрын

There’s better videos out there of actual professional detailers who apply ceramic coatings correctly. The performance of the coating could’ve been miles better than what he’s shown.

@Michael-jq5pf

3 жыл бұрын

Bucket list? Just buy it lol a bottle of AvalonKing like used in this video is, what.. 50 bucks?

@troyd-motorsport9933

3 жыл бұрын

@@JJS432 Note a single so called professional has done this type of display on ceramic coating though. they can talk it up as much as they want, but its not until you see it under a microscope, you realise it actually is a coating, not just some wax, not evenguys as big as Ammo NYC have done this type of test.

@tejaspadhye

3 жыл бұрын

@@Michael-jq5pf 50 bucks is quite a bit in India. And its ceramic coating is of no use unless you do colour correction and proper polish before applying. That ramps up the costs. Also, not everyone has garages for keeping the car away from dust during curing. So we have to go to a detailer which again is expensive. 🙄

*I'm giving away a few New Unopened Ceramic Coating kits I have leftover to the first ones who can spot the CLUES in this video. It has to do with continuity and mistakes here are the 3 timestamps where the clues are **00:24**-**00:35** and **15:03**-**15:24** , **05:14**-**05:28*

@mikefrysz2157

3 жыл бұрын

Use of tape between the original side and treated side reacted differently when soiled.

@frostyflake1128.

3 жыл бұрын

You used a fish tank for the first mud mix and a trash can for the second mud mix

@foxtrot.tango.whisky

3 жыл бұрын

The Mercedes-Benz is a new vehicle very similar to the one from the first episodes of the see-through vehicle. If not a replacement vehicle that looks very similar to the other one from those episodes, then the Merc has had some serious fixing up done to it. ? Man I loved this video on ceramic coatings. I would love to see a similar video that looks at how ACF50 forms to protect a corrosion inhibiting, preventing & halting layer to metals such as engine blocks, A-arms, knuckle joints, suspension parts etc on vehicle and motorbikes. It is widely claimed to be the best product for such applications but very few actual rigorous tests conducted here on KZread, and to my knowledge none conducted in the signature Warped Perception style of taking testing to the extremes. Thanks for the upload man!

@floyd084

3 жыл бұрын

You wore the same blue checkered shirt during the application of the ceramic coating and after it cured 48 hours later.

@WarpedPerception

3 жыл бұрын

@@floyd084 ohhhh!... You are very close

I think it would’ve been a more even test if you had polished both sides and then do the ceramic coating on just one side. Curious what the results would have been

Just a suggestion: ceramic coating does not compete against no coating. It competes against classic wax or polimer based coatings, so it would be nice to include those in these tests.

@juzoli

3 жыл бұрын

Also there are spray-on ceramic waxes on the market, which are extremely easy to apply. Of course it is not as strong as the concentrated stuff used in this video, but way better than anything else on the market. I would love to see that under microscope as well.

@Outlawzand1

3 жыл бұрын

Get a ceramic coating on the vehicle and then every few washes, add a sealant like TurtleWax seal and shine as maintenance

@DigiTuben

2 ай бұрын

Yeah jusoli, I was thinking the same thing while watching. A test between good wax and ceramic would be great to understand the real world difference!

@juzoli

2 ай бұрын

@@DigiTuben Non-ceramic coating lasts 3-6 months. Spray-on ceramic lasts at least a year. I reapply 1x a year, and based on the water beading/shedding, it is still on. That’s my personal experience. There are a few tests on youtube, for example Project Farm.

I got my truck ceramic coated about 3years ago now. I get a lot of friends that are just like, did you just wash this, and most of the time it’s been two weeks since it was. It really does help in keeping the truck clean.

Very good job doing the microscope shots, something nobody else has done. You went that step ahead.

@WarpedPerception

3 жыл бұрын

Thanks! Yeah that was the main point of this video, but I wanted to extend it and do a few other funny tests as well.

@WarpedPerception

3 жыл бұрын

By the way it was very very difficult to pull that off,

@ikocheratcr

3 жыл бұрын

@@WarpedPerception I thought it was difficult, hence why I mentioned you went that extra step, where it really gets hard. Love your videos.

It will end up on everyone's recommendations in like 5 years sadly. Great content!

@WarpedPerception

3 жыл бұрын

Lol... Your right

I would have loved to seeing you polish the whole hood and only ceramic coat half. That would seal the deal for me (pun intended)

@OrsoGrigio74

3 жыл бұрын

and also have half of that powerbank coated and half not, to compare with and without coating on the same surface (and with the same background colour). What's more, under the microscope we see that the "ceramic crystals" are scarcely distributed, and the rest of the coating is made from some other substance (maybe a kind of resin?).

@MiGujack3

3 жыл бұрын

I agree, this was inconsistent.

@EwanBrooks

3 жыл бұрын

There's plenty videos out there of cars with a 50/50 split with and without ceramic coating so you can see the affects.

@benoit8850

3 жыл бұрын

Yeah, #1 50/50 split and whole surface buffed #2 did not throw mud on the whole surface, just the corner. #3 did not do the finger and weighed towel test. #4 did not finished by properly showing end result #5 TOO much editing, anything could have been done to it after the mud, Me thinks this was disguised add, not buying it

@jason0870

3 жыл бұрын

@@benoit8850 i obviously can't say it was a sponsored ad for sure, but parts of the vid sure seemed like it.

How come your videos dont get many views? The editing is nice, and the videos are interesting.

@WarpedPerception

3 жыл бұрын

Because the algorithms don't want to work. and for KZread channel normally has the same type of content all the time, then KZread Just dumps that video in front of all the subscribers all at once. But since my video subjects are very diverse, there is a recipe involved, and in order for me to get a lot of views I need to post more videos more often. I'm glad you notice !

@insanitybe

3 жыл бұрын

Because the intro is to loud for headphone users

@WGRF

3 жыл бұрын

Much more than that. This man is really a lot. Good craftsman, good researcher, good storyteller. His experiments are well thought out and really well told. I mean the man's got a dedicated slow motion camera for a couple of shots! He has everything in his arsenal to become huge, only thing is that KZread recommendations suck.

@atarvhegde5210

3 жыл бұрын

@@WarpedPerception Well , but i got to know about your channel becuse it got recommended.

@WarpedPerception

3 жыл бұрын

@@insanitybe lol... No way. And actually other KZread channels mostly have very low audio levels. I do my audio levels the same as for broadcast tv, so when you turn the volume all the way up on your phone it is very loud so you can hear it, that's actually how those levels are meant to be. you ever watch a video on your phone and turn the volume all the way up and find yourself trying to turn it higher and higher but that's as loud as it goes and you still can't hear it? That's why those audio level recommendations exist..

Hands down, the best quality KZread on car stuff.. Fantastic job

Most probably the best approach to reviewing ceramic coatings!! just great!!

Hands down! The best review on Ceramic coating ever! With visuals and everything! Great job!

@WarpedPerception

3 жыл бұрын

Thank you

i had always been skeptical of these, awesome to see a in depth look on these coatings

This is so good. Wow. Well done. There is a reason this is one of my favorite channels.....and you’re nice enough to link up with LSC too on a video.

This is the best video of the results of ceramic coating on KZread. Cross sectioning is the best method. We do this all the time with multilayered circuit boards for each layer and plating. Awesome job!!

Wow! Great video man! Thanks so much for going through all of this for us :) I'm sure this video is gonna boost sales for many and better yet, help people like me protect their cars that they can't seem to keep out of muddy situations 😅🙌

I've got to say, that was probably one of the better videos I've seen on youtube. Keep on keeping on buddy. Made me a subscriber!!

Most comprehensive and thorough review I've watched on Ceramic Coating . Well done mate

This is really cool, i love the microscope shots!

Those poor cars in the parking lot next to where he did donuts

Top video on Ceramic coating ! Best so far ! That microscope view says it all ! Thanks for sharing !

Ed Bolian told me it was no joke. You proved it with the microscope.

This may be your best video ever, great hustle man.

Great vid. Great effort. I always appreciate you going the extra mile and really doing things right.

Awesome video, thank you for the effort. You've answered all the questions and my sceptisisms about these Ceramic coatings.

First time I see do a cross section of Ceracoating in all the videos I watched about it. Really shows that you're not paying for snake oil. Pretty cool man, got a new sub! Thanks a lot!

Amazing video with lots of good detail. Nice job!!

Always curious to see it under a microscope myself but you did it! Thanks! I love your channel! I’ve got 2 MKIV Supra’s!

That is amazing! seriously the best review of ceramic coating I have ever seen! I have always been skeptical thinking its just a slightly better version of wax. I think I need to go ceramic coat my car now.

11:30 Gah!!! stop rubbing the fender. That sound!!! It's like nails on a chalk board!! 😬

@WarpedPerception

3 жыл бұрын

Haha... I couldn't believe it

@korishan

3 жыл бұрын

@@WarpedPerception Yeah, that is pretty crazy how that junk can stick to a car like that. I've been interested in ceramic coating for awhile. Just haven't bit the bullet on it yet. It has come down in pricing over the past few years, which is good. Curious, could you possibly do a test of this stuff on glass? Then cut the glass like you did the plastic case to show profile view?

@LULU1422__

3 жыл бұрын

Hahahhahha my favourite sound

This was a really cool and interesting episode! Thank you! I liked the microscoping part the most.

@WarpedPerception

3 жыл бұрын

I would agree ! Thanks

This is one of the best tests I've ever seen!

Thanks for the cool testing. Microscope test was awesome I was wondering about that myself.

Wow really good quality on your vids. Really enjoyed watching this. Keep it up

Awesome video, like always! This channel is heavily underrated. I hope one day you gain the popularity you deserve!

@WarpedPerception

3 жыл бұрын

Thanks but its all my fault because I don't upload enough, I couldn't get my priorities straight for a long time.. but I'm trying to fix that now, I'm trying to simplify things

Well that was a really through test. I loved it. Keep doing the good work man. You gained a subscriber

@WarpedPerception

3 жыл бұрын

😊 thank you very much

This is an amazing video. Well done, as a ceramic coating installer it is awesome to have a video I can share with my customers to show that I'm not selling them snake oil.

Glad to see how far your channel has come since i first started watching at 7,000 subscribers. Keep it up!

@WarpedPerception

3 жыл бұрын

Thank you! And you want to know the crazy thing, my original mission the reason I started this channel in the first place, was clear from the beginning, what I didn't know was how much work money equipment and dedication and was going to take for me to achieve my original goal.. I am glad to say however that in the month of December 2020 everything finally came together, now I'm going to plow full Speed ahead and try to put on some serious diversity, craziness and volume! Thanks for sticking around who would have thought it was going to take me 4 years?

@DreamGaming12

3 жыл бұрын

@@WarpedPerception whatever content you’re planning to put out, I’m gonna be here for it!

Wow.... Didn't believe it, but now I'm sold! Definetely ceramic coating my car in the upcoming summer!

Just freaking awesome review, the best ceramic coating video out there!

Dupont, 3M or some chemical company needs to get you on their R&D or marketing dept.! You do better then their advertisements. Great video sir!!!

I think you did amazing work with that stuff and now I know that it really does make a difference for the good stuff

Did the Buff/Wax before coating change the way the dirt and mud acted, or the coating?

@TheProPilot

3 жыл бұрын

It helps. But the coating finished the job.

@TheKvs777

3 жыл бұрын

No. The panels are cleaned with isopropyl alcohol before the ceramic coating is applied. Meaning there is no wax left on the paint at the time of application.

@MiGujack3

3 жыл бұрын

@@TheKvs777 it's not about the wax, he talking about the smooth surface after that.

Dude!!! That's some insane test. Well done and thanks a lot

@WarpedPerception

3 жыл бұрын

Thanks!! It was actually a ton of work

Iam so relieved after watching this video. Got my car ceramic coated a week back and surely can say It's really worth it. Thank you so much for an in-depth review. Subscribed!

@WarpedPerception

3 жыл бұрын

Thanks !

Amazing production quality 💯

GREAT review of ceramic coatings, been wanting to see an actual cross-section forever.

Proper detailed test AND donuts in one video!? This deserves a proper chair recline to enjoy.

Really amazing testing you've done here. I've always wondered about these same questions about ceramic coating for paint, you went above and beyond with the microscope filming. Well done!

@WarpedPerception

2 жыл бұрын

Thanks! I was interested for so long.

Not sure if such extreme testing was needed, but you're microscope view was the best!

That's awesome. Can't believe this stuff actually works.

informative and great cinematography as always

Absolutely brilliant. Well done sir. This was just as good as Project Farms tests. Bravo!

Superb video .. explains ceramic coating perfectly 👌

Too cool! Speaking as someone who now has their first ceramic-coated car, it makes a massive difference. I haven't had to use soap on it once -- just a power washer and microfiber cloth. Everything just wipes off of it, it's amazing

@WarpedPerception

3 жыл бұрын

I don't have a car with ceramic coating yet either but I probably will in the spring I'm going to ceramic coat my Supra, but I have heard that exact same thing from many people saying that ever since they put ceramic coating they don't even use soap at all they just rinse the car off, pretty cool if you ask me, I would imagine that an automatic car wash would work a lot better as well.

@demon39063

3 жыл бұрын

@@WarpedPerception Be careful going to an automated car wash with a ceramic coating. They require a special pH-balanced soap, at least the one I have does.

You are a mad man. I friggin' love your channel.

@WarpedPerception

3 жыл бұрын

Thank you

Definitely earnt a sub just from the sheer detail in this video. Props man

Very cool👍 love the videos man

this vedio should at least have 100k views he has put so much time and effort in it.

@WarpedPerception

3 жыл бұрын

Thanks!

Wow this is the best experiment ever!

Amazing video of proof. I have it on my and I did not even knew if it is working or not. Now I know my paint is protected.

Great video as always. 👍🏻

Awesome Video my man 👍

Finally someone who actually shows what it is and what it does instead of loud claims without any proofs. I loved microscope part, thats most convincing.

My friend, you just gained one more subscriber. Great job brother

Kudos to you for pulling this off

Great video as always!

Man that was the coolest ceramic coating video ever!

@WarpedPerception

3 жыл бұрын

Thank you! I just wish I had a good thumbnail..

Hahahaha, that was fun to watch. Love the Windex! Keep em coming

Keep the sick vids comin! the content in these vids is incredible

@WarpedPerception

3 жыл бұрын

😊thanks you

This is AWESOME!! I wondered if it would self level in the gaps and create a smooth surface. That’s for the great video.

Such a great explanation..❤️❤️

Wow the cross-section microscope shot was mind-blowing. Excellent work!!

Its a good day when warped perception posts:)

@WarpedPerception

3 жыл бұрын

Thank you ! 😊

Supreme video. I appreciate the effort you put into making this for us. Much respect !

@WarpedPerception

3 жыл бұрын

Thank you

That's incredible. Fantastic video thank you.

I have always wanted to see if this actually made a protective layer. Thanks man for this. Superb video as always. Love you're supra as always. Thanks for that small view of her. Haha.

@WarpedPerception

3 жыл бұрын

Same here, I always thought if the ceramic coating stays behind it has to be there if we are able to look at it under powerful magnification.

This is great to see the actual microscopic results and that it's not just snake oil. This sold me.

Nice video. Useful and interesting!

I have that exact coating kit sitting around and I've been stalling to do it. After this I will do it tomorrow for sure

@TheCoolDave

3 жыл бұрын

Same here, I needed to do paint correction but, limited time. Now it's Winter and under 30 outside, so no detailing on the car. I'll have to wait till spring for it..

Your videos are superior because you show us, then you tell us what you showed us; then you tell us again.

I thought the footage with the mud was amazing. And then we got the microscope! That was an awesome video, Matt! Thank you!

Incredible results. Great job showing what is actually happening on a microscopic level. It really proves the technology and the manufacturers claims are legit. Awesome video.

Thanks!! Really appreciate the microscope footage

Awesome video!

so basically it's just like the old timers quick head gasket repair, liquid glass (sodium silicate)? used to be able to go to the pharmacy and get a large bottle, toss it in a cooling system (with just water) run it and drain it out and it would dry to a glass like consistency after a day. if it is in fact, wow is it being over charged for.

@simontist

3 жыл бұрын

The traditional corrosion inhibitor in coolant is also silicate based, probably works similarly but a much lower concentration. (different to the new type, which uses organic acid based corrosion inhibitors)

@piciu256

3 жыл бұрын

Yes it's pretty much that, you can also buy it for covering glass windows, it's called quartz coating if I'm not mistaken, and again- it costs way less that this crap, as in you guy a jug for a price of the little bottle.

@OnlyTheBestViralShorts

3 жыл бұрын

@@piciu256 it is not the same. Liquid glass is Sodium n-silicate which is water-borne. The ceramic he is using is most likely polysilazane which is not compatible with water. I know this because I manufacture ceramic coatings for automotive paint use. You cannot use “liquid glass” (sodium n-silicate) for this purpose. It is good however for coating very porous surfaces like concrete.

@MarcillaSmith

3 жыл бұрын

@@OnlyTheBestViralShorts so before using the sodium n-silicate, should we prep the surface with concrete?

Thank you!!! Not a car detailer but you show an actual cut on the treated surface on the paint.. youre awesome!

@WarpedPerception

3 жыл бұрын

It's was tough but I just had to see it

It's really amazing! Thank you!

Phenomenal video, thanks mate.

amazing in this investigation... keep up buddy!

I really really reallyy liked this video how ceramic coating works. And Satisfying to watch.

Dope video! amazing content and explanation... not to mention the 10 donuts you did!!!