I love the painters tape trick to keep the screw holes evenly spaced in the top! That's a tactic I'll definitely use a lot! (I wonder how I didn't know of it, or think of it, before. Genius! 👍🤓

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thank you sir! Once in a while ingenuity accidentally hits me. 😜😂

Another great video Keith. Love the design, the descriptions of what you are doing, and of course discussions about when things don't go quite as you planned. Can't wait for the next video.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Awesome, thank you Doug! I greatly appreciate that. 🙏👊

Nice job Keith ! Very strong and flat. The VacPad system is incredible . Thanks and keep it coming.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks Matthew!! I greatly appreciate the support and the kind words 👊

Keep up the great work, Keith! That vacpad looks awesome!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks dude! Loving this vacpad system!

Nice job ,just the inspiration I was looking for .

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Oh awesome! Thanks man 👍🏻

Way cool! Now to get with my husband about moving forward with our garage/workshop situation. :)

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Giddy up!! No time like the present 😜

Awesome! Looking forward to the shop tour vid!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Coming soon! Thanks George!

Your commentary is gold!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks so much! I appreciate that! 👊

Awesome build!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks a lot, Hank! 👍

Best KZread channel I have found in ages, educational, quirky and fun, great combination.👏👏

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Wow, thanks! I really appreciate that, Roy! 🙏🙌

That's cool!!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks very much, Kaleb! 🙌

That look amazing!! Great project!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks so much! #TotalBoatBABY!!

U are incredible man!👏

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks so much!! 🙏🏻👍🏻

Sweet vid!! Awesome versatility in the bench top.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks man!! I'm liking how it's working out so far. 👍

You had me at SNACKS!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

😂😆 I literally had to grab one after I did that intro.

Now, that’s one hell of a bench top, Keith. Those vacpad’s are a great idea too. Have a good’un 👍

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks mate! Its definitely a sturdy plank to work on! 💪

I’ve never sanded a shop project so much. That’s one fancy bench!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Would you stop it? You’ll have plenty of time to destroy it after I get it. 😂

Great video agan thanks 👍

@KeithJohnsonCustomWoodworking

2 жыл бұрын

🙏🏻👍🏻😎

“With just a little bit of air” or lack there of. Great video!! Thanks for the idea of the mini router table.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

You bet! Thanks for watching!

Thanks!

@KeithJohnsonCustomWoodworking

3 ай бұрын

Wow! Thanks Tim. That is super generous of you 🙏👊

@tcreagh

3 ай бұрын

@@KeithJohnsonCustomWoodworkingI think you are the generous one and I appreciate it.

The censored dog hole finishing bit got me LOL.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

😜😂😆

Another great KJ video! Love the way the torsion box mounts to the tool box and that VACPAD is serious! Thanks for posting. I'm gonna try real hard to use "...Total Boat Baby" in a legitimate sentence. I'll try it out on my wife. She's always been an objective thinker.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

😂 That phrase will effortlessly slide into any conversation. It's actually a good conversation starter to break the ice.

That router table is awesome! I Def need to make one!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks! Cheers! 🍻

Keith, you're at the top of your game! Great video. You had me LOL'ing uproarously!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Too kind!! Thanks very much! Glad you enjoyed it 🙌

Fantastic work, Keith! Nicely done! 😃 You know what... I never thought about it, but now I may make one of those for me as well! 😃 Anyway, stay safe there with your family! 🖖😊

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Go for it! Thank you sir!

The table design and construction is great but your humor and production of the video is just amazing.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Too kind! THanks Lenny 👊

@josephKEOarthur

Күн бұрын

Spot on! Funny! Great guy!

Watched a few of your videos. Had to sub. Thanks.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Awesome, thank you! I really appreciate it! 👍

Cool beans!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks a lot!

Great video bro!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

THanks dude! Super appreciate it. Hope you are well! 👊

People The legend is back good work 👍😁

@KeithJohnsonCustomWoodworking

2 жыл бұрын

😜👊🏻😎

Love the video and I was worried that Jerry wasn't going to make an appearance .Love that cat.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

😹 He's usually lurking or napping somewhere...

Nice torsion box. I think I’ll be making something similar.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Very cool! This is actually my first one, so hopefully nothing goes haywire 😂

Great Vid..... One thing which made me laugh though. @17:00 when you make your "Oh no I forgot a piece comment" did you realise that when you release that piece again to come back to your router table, that your router table will be on the floor?.....lol.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

That's why that pad is on a separate valve switch that would get switched on and off 😉

@dannyvannierop805

2 жыл бұрын

In that case I did not say anything 😅

@KeithJohnsonCustomWoodworking

2 жыл бұрын

@@dannyvannierop805 😜🤣

I’d love that mini router table you made👌🏼🙏🏼

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks very much! Video coming soon!

@tedrzz

2 жыл бұрын

Agreed, super interesting!!

While I found the video instructive, I stayed because it was deeply entertaining.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks Peter!! Comments like this make it all worthwhile. 🙏👍

Finally! The new video has released

@KeithJohnsonCustomWoodworking

2 жыл бұрын

😂 Jerry said the same thing 😹

@numerousid6478

2 жыл бұрын

@@KeithJohnsonCustomWoodworking miss both of them!

Awesome video. Love the humor. I was wondering how you retrieve items that fall down the dog holes into the bench? And a suggestion on sanding between coats - you can use a much finer grade of paper than 200....closer to 600 is adequate to take down the rough spots without removing too much of the last coat applied and gives a nice smooth finish.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Yeah, I'm guessing I will only drop screws down there, but anything of importance that is metal can be fished out with a magnet. Thanks for the sanding top, but I don't think I own anything higher than 220 😂

I am SO stoked for the mini router table build! I just made one but it’s too clunky and not mobile enough to put away whenever I don’t use it. Lookin forward to your version, looks like a great size

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Oh cool!! It's only prototype 1, so hopefully I work out any kinks in the future. I think I over-engineered it for such a small little table 😬😂

@joejr.971

2 жыл бұрын

@@KeithJohnsonCustomWoodworking over-engineered is the way to go. Best to have too many features than too few, that’s what I tell myself to justify huge time sinks atleast

@KeithJohnsonCustomWoodworking

2 жыл бұрын

@@joejr.971 Yeah, always good to rationalize manic tendencies like ours. LOL.

nice idea for more surface to store junk.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

That’s usually how things happen 😂

@JkCanvas

2 жыл бұрын

@@KeithJohnsonCustomWoodworking Happens in my shop. I clean it and boom the elves put all the crap back..

Gatito 😺 mucho que aprender de tu. Saludos.!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks! 🙏👍😎

Keith, like all the other videos you do, this one was magic. The work, the naration, the sounds.... Speaking of sounds: What liquid did you drink with the straw @6:47! Since you are an influencer, I WANT to drink the same thing 🤣🤣🤣 Thanks again for this wonderful video

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Glad you enjoyed it! And that is actually a sound effect of an "acid burn sizzle" 😂...so, I don't think you want to drink that!

Jerry is incredibly enthused😹

@KeithJohnsonCustomWoodworking

2 жыл бұрын

You can't rattle that guy! 😂

At ~15:44 you said air compressor. Did you me vacuum pump? Fun video to watch.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

It says "oil free air compressor" on the label, so I assume that's what it is. And thanks! 👍

Cool. Seems like the vac pad would be great for profiling edges and such with the router

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Absolutely! Infinite uses 👍🏻

@TheTranq

2 жыл бұрын

@@KeithJohnsonCustomWoodworking do you have a discount code for the branding irons by chance?

Another awesome build Keith! 👍🏻 I’m guessing that top is kinda heavy? I use the Halcyon finish a lot and really like it! That vacuum system is the cats meow! 😺 And it’s Jerry approved! 😺 Thank you very much for sharing!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Well, I won't be lifting it up and spinning it around on my finger tip like a basketball, but it's manageable. 😂 Thanks so much for the comments! 🙏👍

very nice Keith maybe you could share that with Jason lol

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thank you!

i would love your mini router table!!!! i am in Canada. Love your u-tube

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks Lise! I really appreciate the support!

@ktsndog

2 жыл бұрын

@@KeithJohnsonCustomWoodworking love the tree bench you made with bourbonmoth

@KeithJohnsonCustomWoodworking

2 жыл бұрын

@@ktsndog Thanks a lot! Definitely one of my favorite projects of all time!

"Strikea" -Cliffhanger

@KeithJohnsonCustomWoodworking

2 жыл бұрын

YES!! YES!! You sir, have nailed it!! 🍻 🏆

Shop cats, so cool!

@KeithJohnsonCustomWoodworking

Жыл бұрын

Thanks man! They’re the best! 😺

How is bottom layer attached to the Husky? Thanks! Love your videos and work.

@KeithJohnsonCustomWoodworking

9 ай бұрын

Thanks! Bottom layer is screwed up into through the cabinet

Just a reminder that your text is now editable - you should double click to edit but ALWAYS uncheck before rendering. Wise words, KJ. Assembly table looks great - I'll give it a 9 out of 10 morsels. One point deduction because them T Tracks aren't mitered and it's making my OCD light up brighter than the lamps you demand in payment.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Ha! You found the Easer egg, albeit an inadvertent editing snafu 😂. yeah, I guess I could have mitered them. Dang! Didn't even occur to me...now my morsels have shriveled right up 😩

Great video, Keith! What are your thoughts on bench dogs vs t-tracks for assembly tables? I mean, you obviously went with bench dogs. Are there more or better accessories for one or the other or something?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks David! Bench dogs and t-tracks are both great options. Although t-tracks seem to have quite a bit more clamping and hold down accessories available, they can also snag and damage workpieces when sliding materials across your bench. So, it's really a preference thing. I know some people who love the tracks and others who regret putting them in.

I thought the vac packs seemed a little gimmicky but after you showed how they work I’m definitely a believer. One question though, how did you secure the one that holds the router to the top? Love torsion top benches, I’m on my second with eyes on the third with “refinements.”

@KeithJohnsonCustomWoodworking

2 жыл бұрын

So, you have a couple options on how to secure those pads...there can also be a hole drilled in the other side which allows it to suck down and be secured to the bench, as well as the vacuum hole on the other side that let's you secure your workpiece.

Thanks for the video!! Off topic from your video though- what do you use to hold up those festool tracks on your garage door

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks man! Here's a link to the mounting clips for the Festool tracks: amzn.to/3Ap0V2S

Well done sir well done. As I'm in the taking my ideas to design / build my assembly table, out of left field comes your video with a unique approach. Now who supplies HDF in my area of the country? (

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Excellent! Melamine or standard plywood are also a perfectly good options. 👍

@allent555

2 жыл бұрын

@@KeithJohnsonCustomWoodworking Would you mind sharing the over all dimensions of the table top please?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

@@allent555 Sure, it's 73" x 27" x 4.25" thick

@allent555

2 жыл бұрын

@@KeithJohnsonCustomWoodworking Thank you Sir, have a great day.

Nice and sturdy, just ignore the wobble...jk, nice job with the table.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

👍🏻🙌🏻

Love your videos. Where do you find the best parts such as threaded inserts and those knobs? All I ever find are junk so I’m just curious if you’re building fine furniture what is your vendor of choice?

@KeithJohnsonCustomWoodworking

Жыл бұрын

Thanks James! Knobs are Powertec and Rockler and threaded inserts from Amazon. All links are in the description of the video.

@JNHEscapes

Жыл бұрын

Great thank you! I am typically lazy and do not read the descriptions thinking most would not take the time to itemize such…but you provide excellent detail so I should have known! Ha!

5:23 THEY BUTT WHAT???? Oh tips pa, pa, pa......never mind. Nice video, thanks for posting.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

😬😆😂

Amazing. Thanks for sharing and inspiring. Quick question ... I tend to drop at least 389 items in my dog holes each time I'm in my shop. But I can get to them when that happens. Are your holes positioned on top of the support pieces inside the box so they each have a bottom?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks Eric! And yes, there is a hole in each "compartment" underneath if need be. Or a small stick with a magnet or double sided tape can fish out anything that may need to be retrieved. 👍

@GlennBrockett

2 жыл бұрын

I imagine that eventually they will fill up with wood shavings / sawdust and cease to become a problem.

Very nice work table! What is the benefit of the satin finish on top of the gloss? Why not just use the satin?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Satin on satin can start to get milky looking. Not really a deal breaker for this, though 😂

Where’d you get the track saw holders for the garage door?

@KeithJohnsonCustomWoodworking

Жыл бұрын

amzn.to/3OOQ350

I too have tear out issues with that style of edge trimmers. What method do you use when it must be perfect?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Typically I don't it cut the edge banding so oversized , so I will just stick a piece of 120 or 150 grit to a piece of wood and hit the edge at an angle by hand until the excess is trimmed away. Or I will hit a with sharp plane or chisel and finish sanding by hand.

Hi. Great video. Where did you get that air compressor and how is it that it attaches to the compressor. I have one for my vacuum chamber to take out air bubbles from epoxy but the fitting makes it impossible to attach the air hose or any sort of fitting so that I can attach the hose. Weird fitting. Still figuring out my options with that but this looks direct so I’d rather go with your air compressor

@KeithJohnsonCustomWoodworking

Жыл бұрын

They sell them on the vacpad website

Have a video or info on the track mounting on your garage door?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Here’s a link to the track clips. It’s an easy install. amzn.to/39PcBk3

@Madmaxian1088

2 жыл бұрын

@@KeithJohnsonCustomWoodworking Tanks :)

Did you miter the ends of the t track at the corners?

@KeithJohnsonCustomWoodworking

Жыл бұрын

No, just left them square.

Good and inspirational idea! What headphones are you using for easy protection?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

amzn.to/2VPwPGS

@robertspiewak1759

2 жыл бұрын

@@KeithJohnsonCustomWoodworking thank you

Nice work. I saw another vid of yours where you had mounted the Dashboard track hinge on a table - is this the table you’re using as an mft? Any concern for dust buildup in the tortion boxes, or just worry about it when you replace the top?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Yes, using this as my MFT. It would take 50 years to fill that up with sawdust, so i'm not really worried about it. 😜

I have been looking for a good branding iron, which model did you get? The smart one?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Yes! The SmartBrand. It’s amazing with the temperature control. 👍🏻

Hey Keith how is that peel and stick veneer holding up? Also for the halcyon did you tip with a brush after or did level nicely with the roller?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Veneer still tip-top. 👌🏻. When rolling the Halcyon I just let it level out, but it’s just a workbench. You may have to tip it on a more important application.

That VACPAD system just sucks! Great video. Keep 'er lit Bro!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

😂 it is such a little sucker!

Hi Keith, did you make the mft top holes so that each hole is usable...meaning not hitting the inside partitions?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Correct. All torsion partitions are directly between 2 holes in both directions so all holes are useable. 👍

Wait, are those air supply tubes, when they actually do not supply air? Or target supply lack of air :)

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Well, they hold air 🤷🏼‍♂️

Another great video Keith, informative and entertaining as always! Quick question: what is the capacity of your vacuum pump (in CFM or litres or whatever). I’m thinking of buying the VACPAD system but I would buy the pump here in Australia. Cheers, John

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Hey John! Unfortunately, I have no idea. The label on my compressor only says 120V, 60 hZ oil-free air compressor, so I'm not sure how much air it's pushing. I would reach out to Dino and DM him directly on Instagram and see what he recommends. instagram.com/kouroscarpentry/

@JohnCinOz1

2 жыл бұрын

@@KeithJohnsonCustomWoodworking Hey Keith, greetings from Australia and thanks for the suggestion; I’ll follow up as suggested. Love your work, mate! 👍

@KeithJohnsonCustomWoodworking

2 жыл бұрын

@@JohnCinOz1 Thanks so much, John! I really appreciate it. Hope you are able to get the Vac Pad system - I think you will love it!

Keith! Was the "TEXT IS NOW EDITABLE, DOUBLE CLICK TO EDIT, UNCHECK BEFORE RENDERING" at 7:25 on purpose?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Uh no. Amazing what people comment on...😂

Hey Keith, are there multiple foot releases available for the vacpad, or does one release everything at once?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Great question! I only have one to release them all, but you may be able to run splitters to different foot pedals. Not sure. Hit up Dino at Kouros Carpentry on IG and you can ask him directly: instagram.com/kouroscarpentry/

More Ear Cam!!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

😂 😆 👂🎥

Also, you never explained how you got the vac pad that’s on top of the table to hold to the actual table top. Does it also suction itself down to the table ?

@KeithJohnsonCustomWoodworking

Жыл бұрын

Yes, with a hole in the back of the pad, it suctions itself down.

Green tape at 9:19

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Gotta have it! 😂

Thanks Keith I get a real kick out of your videos in your cats. I purchased the VacPad system based on your video. It arrived in January and I just started trying to set it up in March but there’s no instructions and it doesn’t look anything like the systems that I see in your video. I have all of the plates. I have the vacuum I have the hoses. I have the foot switch, but I don’t see anywhere to hook the tubes up. I wonder if you have any instructions on how to set it up

@KeithJohnsonCustomWoodworking

3 ай бұрын

Hey Tim! You can can out this video by Spencer Lewis on operation kzread.info/dash/bejne/oYmam7GQd6uzn9o.html . But there should be little quick disconnect ports on all of the pads that the hose pushes into. They should either by on the edges of the pads or the bottom depending on which ones you have. Hope this helps!

@timcgmail

3 ай бұрын

@@KeithJohnsonCustomWoodworking Thank you I have the newer pads and it appears all the videos are using the older style with the port on the edges. I'll see if I can figure it out. Appreciate all your videos. Thank you

@KeithJohnsonCustomWoodworking

3 ай бұрын

@@timcgmailOh no! Sorry I couldn't help with the redesigned pads.

@timcgmail

3 ай бұрын

@@KeithJohnsonCustomWoodworking Got the VACPAD setup and integraded into my MFT Table it's working great. Thanks again for the help and the reference to the VACPAD system. -tim-

Beautiful build. Any worries you might drop small things down the holes? On my Paulk style bench I always drop stuff down the holes.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

For sure. Hopefully only screws, though 😬😂. I’m thinking about cutting an access panel underneath in case I drop anything super important down there.

Great video! I've been trying to find where to buy high density mdf plywood. Do you have a recommendation for where to buy? I haven't been able to find it anywhere.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Thanks man! Not sure where you live, but I get it at Atlantic Plywood.

@messiercustomwoodworking

2 жыл бұрын

@@KeithJohnsonCustomWoodworking thanks! It looks like they have locations a little far for me but it gives me a starting point.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

@@messiercustomwoodworking I don't think they sell to the general public so you need a business account.

I cant find anything on the internet or in my town for HDF plywood where do you get yours?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Atlantic Plywood or Robert’s Plywood on Long Island. It also goes by combi-core

where do you get the brackets and clamps for your Festool guide rails. That would work perfect in my small shop. Thanks!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

You can get them right here: dashboardpws.com/products/guide-rail-brackets-bundle

@robertwelch5584

2 жыл бұрын

@@KeithJohnsonCustomWoodworking Looking for the one that you use to connect to the roll up garage door.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

@@robertwelch5584 ohhhh. LOL. Here you go: amzn.to/39bxZD6

@robertwelch5584

2 жыл бұрын

@@KeithJohnsonCustomWoodworking Perfect and thanks!

How is the vac pad that is flat on your bench top attached to the bench? Is it just vacuumed to the bench as well?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Correct! there is a tiny hole on the back that sucks it down to the table. It's a really cool system.

@handymadness

2 жыл бұрын

@@KeithJohnsonCustomWoodworking omg. That’s unbelievable. I must buy some of these. Thanks for bringing our attention to this. I always though the only option as the festool version!

@KeithJohnsonCustomWoodworking

2 жыл бұрын

@@handymadness Awesome!! You won't regret it!

Amazing table looks awesome, thanks for showing the build, but at the end of the video you seem like regretting it, couse we all know that most likely who wouldn’t use a brand new surface for junk once in a while

@KeithJohnsonCustomWoodworking

2 жыл бұрын

😂 I just know myself and that surface will (at times) become a collection dump for miscellaneous stuff that just gets in the way. Just need to be more vigilant about keeping it clear.

Ugliest thing ever! 🎉 But Absolutely - Adequately sufficient & functional!

@KeithJohnsonCustomWoodworking

Күн бұрын

Is that a quote from your yearbook?

They should rename KZread KeithJohnsonTube

@KeithJohnsonCustomWoodworking

2 жыл бұрын

😂 Too kind, but thank you!

what is the total height of your bench now?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

36 inches

@AlexK07010

2 жыл бұрын

@@KeithJohnsonCustomWoodworking thank you. Ah just noticed. You took casters off?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

@@AlexK07010 Correct. Don't need it to be mobile.

@AlexK07010

2 жыл бұрын

@@KeithJohnsonCustomWoodworking ah . I have same tool box and was trying to figure out how it matches the table saw height now it makes sense. Thank you

Hey Wild Man, another winner. I ordered some more RMC today and told my supplier that YOU are probably responsible for a great many sales, and they said “Who”? Sorry Man, I’ll stay after them. Great video. Did you weigh that torsion box?

@KeithJohnsonCustomWoodworking

2 жыл бұрын

😂 Well, name dropping doesn't always work. hmmm...haven't weighed the table, but i can lift and maneuver without issue which means it's not too heavy 😂

Adequate is right, you only put your logo on it 3 times. There's clearly way more surface area (especially on the inside) where you could fit more. 😤

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Yep, and the bottom and the sides, too. Next time...😂

"Text is now editable, double click to edit, uncheck before rendering". Oops, I think you forgot something 😂🤣🤷

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Easter egg 🥚

“Accidentally used metric”…

@KeithJohnsonCustomWoodworking

2 жыл бұрын

It happens…😂

Зануда.

@KeithJohnsonCustomWoodworking

2 жыл бұрын

🙏 👍 😎

Why do burglars poop in houses?

@KeithJohnsonCustomWoodworking

Жыл бұрын

It’s a cardigan, but thanks for asking.

That sucked...

@KeithJohnsonCustomWoodworking

2 жыл бұрын

Just hit that foot pedal and it won’t 😂