Great video. Watched it twice. I have an office with 5 out buildings. Further building is 800ft to the office. The UISP setup was advised to me to connect every building since it is point to multipoint. With two access points covering a 60 degree angle, i’ll be able to cover each wave nano that is each out building. Each building has ten 1080p cameras (looking to upgrade to 4k in the next 5 years), 2 buildings have 12 wifi temp, door, and smoke sensors. Is the UISP setup overkill or would you recommend something else?
@hostifi
Жыл бұрын
Hey! Thanks for watching, I would recommend using airMAX 5GHz NanoBeams and these will more than handle the cameras you have and the ones you are planning on adding. UISP Wave might be a little overkill for what you have planned.
@PoeticeTech2 ай бұрын
What is the difference in setting it up as a PtMP link or and Access Point? Your video was so helpful in me getting these mounted. Updating them is a bit of a pain.
@tcsoaux6575 Жыл бұрын
Is there a separate mount to bond 3 of them together or is it included in the design? we just picked up a few of these to test in one of our towers and I'm curious to see how they perform.
@hostifi
Жыл бұрын
Hey, so Ubiquiti hasn't started offering that mount yet. For now, probably only use the one.
@jameslonganfelix8000 Жыл бұрын
It's stated that one wave AC base station can support 15 stations. Does these stations means it can only support 15 clients? Kindly shed some more light to this. Thanks
@helpdesk14943 ай бұрын
Hi, can you limit the bandwidth on these?
@LifeIsDigitalUK Жыл бұрын
In the uk what license is required to run this sort of wireless link?
@hostifi
Жыл бұрын
60GHz is license free in the UK.
@bikemyride7 ай бұрын
i have 2 WAVE-AP units, can one be setup as a station, been trying but does not appear so.
@hostifi
7 ай бұрын
Hello! Thanks for watching, the Wave AP cannot be used as a station. For that you'll need either the Wave Nano, Wave LR or Wave Pro.
@dulkr281311 ай бұрын
I have 2 nano wave and i want to set up them as PTP link. But im not able to make one of them as Access point so any suggestions?
@hostifi
11 ай бұрын
Thanks for watching. With UISP Wave, only the Wave AP can be set as an AP. The Wave Nano cannot be set to anything other than a CPE/Station.
@dulkr2813
11 ай бұрын
@@hostifi you are wrong. It can be set as AP if u upgrade it to 3.2 beta I try it and its work perfectly.
@hostifi
11 ай бұрын
Thanks for the clarification. While we don't recommend using EA software in production, glad to know that PtP works!
@ui.trainers Жыл бұрын
Which video editor do you use?
@hostifi
Жыл бұрын
Final Cut Pro, for macOS
@ui.trainers
Жыл бұрын
@@hostifi THANK YOU! Super nice video!
@user-lf5be5oi4c Жыл бұрын
please Can it be used ? PtMP access point Wave Nano
@hostifi
Жыл бұрын
The UISP Wave Nano cannot be used as an AP in a PtMP environment, only as a CPE
@user-lf5be5oi4c
Жыл бұрын
@@hostifi please can it be used ptp Just UISP Wave Nano
Пікірлер: 22
Great video. Watched it twice. I have an office with 5 out buildings. Further building is 800ft to the office. The UISP setup was advised to me to connect every building since it is point to multipoint. With two access points covering a 60 degree angle, i’ll be able to cover each wave nano that is each out building. Each building has ten 1080p cameras (looking to upgrade to 4k in the next 5 years), 2 buildings have 12 wifi temp, door, and smoke sensors. Is the UISP setup overkill or would you recommend something else?
@hostifi
Жыл бұрын
Hey! Thanks for watching, I would recommend using airMAX 5GHz NanoBeams and these will more than handle the cameras you have and the ones you are planning on adding. UISP Wave might be a little overkill for what you have planned.
What is the difference in setting it up as a PtMP link or and Access Point? Your video was so helpful in me getting these mounted. Updating them is a bit of a pain.
Is there a separate mount to bond 3 of them together or is it included in the design? we just picked up a few of these to test in one of our towers and I'm curious to see how they perform.
@hostifi
Жыл бұрын
Hey, so Ubiquiti hasn't started offering that mount yet. For now, probably only use the one.
It's stated that one wave AC base station can support 15 stations. Does these stations means it can only support 15 clients? Kindly shed some more light to this. Thanks
Hi, can you limit the bandwidth on these?
In the uk what license is required to run this sort of wireless link?
@hostifi
Жыл бұрын
60GHz is license free in the UK.
i have 2 WAVE-AP units, can one be setup as a station, been trying but does not appear so.
@hostifi
7 ай бұрын
Hello! Thanks for watching, the Wave AP cannot be used as a station. For that you'll need either the Wave Nano, Wave LR or Wave Pro.
I have 2 nano wave and i want to set up them as PTP link. But im not able to make one of them as Access point so any suggestions?
@hostifi
11 ай бұрын
Thanks for watching. With UISP Wave, only the Wave AP can be set as an AP. The Wave Nano cannot be set to anything other than a CPE/Station.
@dulkr2813
11 ай бұрын
@@hostifi you are wrong. It can be set as AP if u upgrade it to 3.2 beta I try it and its work perfectly.
@hostifi
11 ай бұрын
Thanks for the clarification. While we don't recommend using EA software in production, glad to know that PtP works!
Which video editor do you use?
@hostifi
Жыл бұрын
Final Cut Pro, for macOS
@ui.trainers
Жыл бұрын
@@hostifi THANK YOU! Super nice video!
please Can it be used ? PtMP access point Wave Nano
@hostifi
Жыл бұрын
The UISP Wave Nano cannot be used as an AP in a PtMP environment, only as a CPE
@user-lf5be5oi4c
Жыл бұрын
@@hostifi please can it be used ptp Just UISP Wave Nano
@hostifi
Жыл бұрын
Hello, no not at this time