UDIRC UD1601 / SG1603 with Wltoys 124017 Motor Swap, Upgrades, Tips, and Steering Fix. 2S Speed Run
1. Motor, ESC, and Servo swap
2. Custom carbon fiber drive shaft
3. Metal differential upgrade
4. Custom painted Hoonitruck body shell
5. Upgraded oil shocks
6. Fix stock steering issue
7. General tips
Пікірлер: 26
Instead of super glue, baking powder and re-drill try this, it made my car feel 10x straighter and more quality feel: cut soda can metal with scissors to wrap around the shoulder of that shouldered loose screw. It can only wrap around 90% to keep from interfering and make sure it is not too tall for the hole. Before you form the aluminum sheet to the screw shoulder, be sure to repeatedly roll it over with a socket to lower the lip left by the scissors. Wrap the screws smooth shouldered threadless part with the shim. Double check that it won't interfere once installed. Wrap screw and roll in your fingers until the slit cylinder shim fits perfectly in the screws hole. Install shim into hole then begin to thread the screw in through the center of it. Double check that as the screw goes in, it goes in smoothly and doesn't crush the shim around it.
@customtoyrevolution
11 ай бұрын
Nice idea to use soda can as shims, thanks
I have the Lancia, love the car despite not being able to keep it in a straight line. The car is all over the place. I'll do the modifications you suggested for the steering. Amazing video. Thank you.
@customtoyrevolution
Жыл бұрын
Making it works the way you want is the good part. Best of luck. You might want to check out this kzread.info/dash/bejne/qpNnkreoqKmYmrA.html, they also have a Lancia version
I love your video. Could you please attach to the video the file you created to customize the remote control car? I beg you🙏🏼🙏🏼🙏🏼
hey I have the udirc 1602PRO, is it possible to find/make decal sheets for it?
Hi i am gettimg the udci truck but i need to no what motor i csn put in it insted of the stock one i was think8ng the 20T motor what servo do i need
@customtoyrevolution
Жыл бұрын
Not sure what you mean. 24mm Dia is the stock size. I put in 2845 motor meaning 28mm Dia but need modification. No need to change servo if it is 3 wired
Love the video where did you print the hoonitruck decals from what website
@customtoyrevolution
Жыл бұрын
DIY
@TadBitTech
Жыл бұрын
@@customtoyrevolution can I purchase a sheet frome you I don't have a printer
Can we make it steer a bit more ? I mean a tighter steering angle.
@customtoyrevolution
5 ай бұрын
replace the servo saver with a longer servo horn. Aftermarket ones usually come with 3 positions
Do you have to change the spur gear and whats the pinions and spur t
@customtoyrevolution
Ай бұрын
Only change pinion from wltoys 27T 0.7mod
@S1m3on._0
25 күн бұрын
Thank you@@customtoyrevolution
Were did u get ur shocks from
@customtoyrevolution
Жыл бұрын
From Aliexpress 2 yrs ago. I shorten them, originally for Wltoys A959. You should be able to something that fits
Did yours stop going backwards?
@customtoyrevolution
5 ай бұрын
mine works fine with the upgraded electronics
Car int fiber upgrade link and servo upgrade
@customtoyrevolution
Жыл бұрын
yes?
@MrSpaztaz57
Жыл бұрын
Wow I just realized how poorly I typed. Do you have a link for the parts you upgraded?
where did you get your wheels from
@customtoyrevolution
Жыл бұрын
Amazon. You can also get them from AliExpress or eBay
@koladenurse
10 ай бұрын
Are there better tires than the stock? I have the brushless 1601 pro and 1604 pro and they ate the stock tires... thoughts