Ubiquiti UniFi Management Network VLAN - Why & How to Configure (in-band/out-of-band)
Жүктеу.....
Пікірлер: 15
@jaypines3 ай бұрын
On my setup I just make my network management on the default vlan and all other user/admin network on separate vlan. Easier to troubleshoot when you do network upgrade/change.
@gregbelcher9373 ай бұрын
Another very informative video with attention to detail and practical examples - thanks!
@lostmatt3 ай бұрын
Could you add a link to description of that other vlan management video you mentioned? Thanks!
I know this is a comment outside of the scope of this video, but I was wondering since your Lab setup has almost all the elements I have in my home network, if there is any chance you can create content on Aggregation switches and how to implement them.
@hz777
3 ай бұрын
If you mean the usw-aggregation and usw-aggregation-pro switches, to me they are just another two switches. What specific aspects do you expect to see? The closest I have is a 10GbE video: kzread.info/dash/bejne/lJump9qYdrGeo84.htmlsi=jLMiKKuo5rOXVa3d
@jjrican72
3 ай бұрын
@hz777 I added an aggregate switch to my network. I've been trying to connect my Enterprise POE 24 switch ports 25 and 26 to the Aggregate switch ports 5 and 6 and set up Link Aggregation. I've read and reviewed some documentation online, but I'm still not clear on how to do it.
@hz777
3 ай бұрын
To set up link aggregation, keep in mind to follow the from far to near approach: first set the link aggregation on the far switch, then change the link aggregation for the ports on near switch, otherwise you may lose the management connection to your far switch. I do have a video on link aggregation: kzread.info/dash/bejne/hXWOtaR_eJfJedY.htmlsi=2RDQ76c7i639yALR , even though it's not about setup.
@jjrican72
3 ай бұрын
That's the part that I'm still a little uncertain about how to do it as I still don't grasp it completely. I need to make the cable connections between the Aggregate and Enterprise before configuring right? Also, only the Enterprise is what I want/can aggregate, so the near switch would be the one in this case. The way the topology looks like now is UXG Pro --Aggregate--USW Enterprises Poe--USW Pro 8 Poe--USW Industrial
Пікірлер: 15
On my setup I just make my network management on the default vlan and all other user/admin network on separate vlan. Easier to troubleshoot when you do network upgrade/change.
Another very informative video with attention to detail and practical examples - thanks!
Could you add a link to description of that other vlan management video you mentioned? Thanks!
@hz777
3 ай бұрын
kzread.info/dash/bejne/X6N61Mhtdsycqps.htmlsi=EsjouVacPmp2T2OF
I know this is a comment outside of the scope of this video, but I was wondering since your Lab setup has almost all the elements I have in my home network, if there is any chance you can create content on Aggregation switches and how to implement them.
@hz777
3 ай бұрын
If you mean the usw-aggregation and usw-aggregation-pro switches, to me they are just another two switches. What specific aspects do you expect to see? The closest I have is a 10GbE video: kzread.info/dash/bejne/lJump9qYdrGeo84.htmlsi=jLMiKKuo5rOXVa3d
@jjrican72
3 ай бұрын
@hz777 I added an aggregate switch to my network. I've been trying to connect my Enterprise POE 24 switch ports 25 and 26 to the Aggregate switch ports 5 and 6 and set up Link Aggregation. I've read and reviewed some documentation online, but I'm still not clear on how to do it.
@hz777
3 ай бұрын
To set up link aggregation, keep in mind to follow the from far to near approach: first set the link aggregation on the far switch, then change the link aggregation for the ports on near switch, otherwise you may lose the management connection to your far switch. I do have a video on link aggregation: kzread.info/dash/bejne/hXWOtaR_eJfJedY.htmlsi=2RDQ76c7i639yALR , even though it's not about setup.
@jjrican72
3 ай бұрын
That's the part that I'm still a little uncertain about how to do it as I still don't grasp it completely. I need to make the cable connections between the Aggregate and Enterprise before configuring right? Also, only the Enterprise is what I want/can aggregate, so the near switch would be the one in this case. The way the topology looks like now is UXG Pro --Aggregate--USW Enterprises Poe--USW Pro 8 Poe--USW Industrial
@hz777
3 ай бұрын
Delete this post for apparent reason.