Nice test Phil. Awesome bit of driving brother 👍 🇬🇧 😀 👌

@PhilBrindley

3 жыл бұрын

Thanks dude! 🤙

Extremely beautiful video 😍👍

@PhilBrindley

3 жыл бұрын

Thank you 😁🤙

Realise this is quite an old video but wanted to say thanks. I'm considering a crawler purchase right now. I was pretty much decided on a trx4 then saw the sherpa for like 150 euros less and pretty much the same spec! Great video showing probably the single best "bang for your buck" upgrade that you could make to this machine. Thanks!

@PhilBrindley

Жыл бұрын

Glad to be if some help. I don’t regret my Sherpa purchase in the slightest, although it did lead me down quite an expensive path 😆

Big difference in the real world, good test!

@PhilBrindley

3 жыл бұрын

I was very surprised. Not sure why after the indoor test, but I was! 🤙

Very nice demonstration thx.

@PhilBrindley

3 жыл бұрын

Thank you for watching. 🤙

For this tires i use Hairbuns 9cm as foams,work very very well on my Yikong 4101.Nice tire test.

@PhilBrindley

2 жыл бұрын

Nice, I have a lot of success with hair buns (although I think they are a little bigger than 90cm). Have them in all 4 of my rigs and not seen a need to change that. 🤙

What a difference! I have the tires on order :) Which beadlocks do you use? Thanks for another good video.

@PhilBrindley

3 жыл бұрын

Hey Arthur, they are great tyres, I'm very impressed. The wheels are AX Speed from Amazon. Thanks for watching. 🤙

Hi Phil, great video. I guess I'll get a CrChamp set too. I just got a new set of injora rims, they fit well but portals are not inside the rims now. Is this happend to you too?

@PhilBrindley

2 жыл бұрын

I think you'll love the Champs! All of the beadlocks I've tried on the truck do sit further out, not something to worry about. Helps a bit on side hills but hampers the steering a little.

Hi Phil great vids on the Sherpa, these lead me to buying one and I have just ordered the Duratrax Deep Woods tyres. You mentioned that you were getting body rub, how did you prevent it?

@PhilBrindley

2 жыл бұрын

Hi Ian, I trimmed the wheel arches down a little, and the inner liners. Didn't get rid of it completely. Depending on the wheels you go for you could also get smaller offset hubs. Part of my issue is that the hubs offset the wheels out a bit,. Making body rub worse.

@ianbaldry554

2 жыл бұрын

@@PhilBrindley thanks for the info much appreciated. I am looking at wheels as we speak and will take the offset in to account.

Hi Phil, great info videos on the Sherpa. Was wondering when it comes to the stock tyres do you know if anyone has cut the tred on them? If so do you have a link or pics for it? Cheers

@PhilBrindley

3 жыл бұрын

That's a great question, but I'm sorry to say that I've not seen any that have been modified yet. Could be a good way to increase the performance, but not something I've ever done. Let us know if you do try! 🤙

@ANONYMOUSGHOST87

3 жыл бұрын

@@PhilBrindley that's ok bud thought I'd ask the question. I've got some pitbull rock beast xl's that I will be putting on, but I probably will have a go at chopping the tread on the stock ones.

@danisantos3255

2 жыл бұрын

@@ANONYMOUSGHOST87 have you tried what you described?

@ANONYMOUSGHOST87

2 жыл бұрын

@@danisantos3255 I started to cut them but I messed up one so I threw them in the rubbish

i have a trx4 stock ,.. and this tires (louise ) is a good upgrade,, !! good lock this beadlocks

@PhilBrindley

Жыл бұрын

I’ve still not heard a bad word about the Louise Champs/Duratrax Deepwoods! 🤙

hi awesome vids mate. could you possibly tell me exact details of them Louise wheels i have the sherpa and want to upgrade..do they fit straight on or do they need mods. thanks again .. class vids

@PhilBrindley

3 жыл бұрын

Hi. The Louise champs are a 1.9 tyre and are slightly taller and wider than stock tyres. They do not fit on the Sherpa wheels so you would need new wheels as well. Because they are bigger they tend to rub the wheel arches a little, so you may want to trim the arches down a bit. Hope that helps. 🤙

@captdanford3841

3 жыл бұрын

@@PhilBrindley brilliant mate thanks for reply 👍👍

@PhilBrindley

3 жыл бұрын

@@captdanford3841 you're welcome. Thanks for watching 😁🤙

hello there are the wheels from metal ? and how does it perform on sand ? and are they better then the stock trx4 tyres and wheels ?

@PhilBrindley

2 жыл бұрын

Full answer in other video comment, but basically Yes Dunno Almost certainly. Thanks for watching 🤙

@HappyDude1

2 жыл бұрын

@@PhilBrindley ow same guy different video :p

Hello nice Video, one question where can i get this motorcoverparts which covers the magnetholder?

@PhilBrindley

2 жыл бұрын

Do you mean the vents in the bonnet? They are 3D printed. The file is available on thingiverse.com Thanks for watching 🤙

@hygelack

2 жыл бұрын

@@PhilBrindley thx vm, yes the vents in the bonnet!

Hello Phil question what about the shock i think they too Hard or its only when is t new sorry for my english

@PhilBrindley

3 жыл бұрын

Hi, yes I think that the stock shocks are too hard as well. Check out my Free Upgrades video (kzread.info/dash/bejne/hXumrsabed2fYNY.html) as you can soften them up a little bit. Or check out tomorrow's video where I swap them for some Yeah Racing Desert Lizards. Thanks for watching 🤙

I m thorn between the Sherpa and the Khamba regarding which one to buy!

@PhilBrindley

2 жыл бұрын

Sorry for the slow reply. I've got no experience with the Khamba, but it sure looks good and they made a few improvements over the original Sherpa. That said, most of those found their way on to the later Sherpa anyway. Oh dang, I'm no help at all here! I'm sure you'll enjoy whichever one you go for. Good luck and thanks for watching. 🤙

Hi Phil i know I’m late but where can I buy those wires that go from the roof to the edge of the bonnet

@PhilBrindley

Жыл бұрын

Hi, Amazon is always a winner. amzn.to/3LWW7IN

@CKRidesDaily255

Жыл бұрын

@@PhilBrindley thank you soo much

Hi Any suggestion for loctite? 243 222 242 which might fit?

@PhilBrindley

3 жыл бұрын

Hi, I recently started using 248 (medium) in stick form and am wondering how I managed without it. So much less mess than with the liquid. But really any medium (blue) loctite should be fine.

hi...detail size for beadlock rim and tires louise?

@PhilBrindley

2 жыл бұрын

Hi. The Louise champs are a 1.9 tyre and are slightly taller than stock tyres. They do not fit on the Sherpa wheels so you would need new wheels as well. The wheels are just from eBay and cost about £35 for the set of 4. Because they are bigger they tend to rub the wheel arches a little, so you may want to trim the arches down a bit. Hope that helps. 🤙

Hi Phil where did you get your bonnet vents from thanks

@PhilBrindley

3 жыл бұрын

Hi John, they are 3D printed. The design is from Thingiverse and I printed them myself. Cheers. 🤙

@MrSlapntickle75

3 жыл бұрын

@@PhilBrindley hi Phil thanks for the reply that’s cool shame I’ve not got a 3D printer lol

@PhilBrindley

3 жыл бұрын

@@MrSlapntickle75 if you are on any Facebook groups I'm sure you could ask on there. 😉

@MrSlapntickle75

3 жыл бұрын

@@PhilBrindley I’m on a few 👍🏻 thanks again bud

Good morning How has the truck held up? Do u recommend it

@PhilBrindley

2 жыл бұрын

Hi, it held up pretty well. I've not driven it for a while but I've not had any issues so far. Still going strong and nothing has broken. 🤙

Can you get these for 1/8 version of your model?

@PhilBrindley

Жыл бұрын

Not sure to be honest. If the 1/8th uses 2.2 wheels then I think you can.

Did u spray the front bumper because stock it’s black not blue

@PhilBrindley

Жыл бұрын

Not the bumper, but if you take the plastic grill off (2 screws on the inside) then you get the body colour and just black out the inside of the grills with paint or a sharpie.

@CKRidesDaily255

Жыл бұрын

@@PhilBrindley okay thanks I didn’t know this

Hello, is it the 1.9 or 2.2 version of Louise ? Thanks !

@PhilBrindley

3 жыл бұрын

Hi, these are the 1.9" version. Cheers 🤙

@huangg01

3 жыл бұрын

@@PhilBrindley Hi, is the beadlocks 2.2" one? I try to fit original counterweight but they seems only fit 2.2 rim.

@PhilBrindley

3 жыл бұрын

@@huangg01 The beadlocks are 1.9". I have the weights as well, they needed filing down a small amount to allow the wheels to fit. If the inner diameter of the wheels is 45mm or more they will fit over the weights.

@huangg01

3 жыл бұрын

@@PhilBrindley thanks!

@PhilBrindley

3 жыл бұрын

@Wei han Huang I have added some links to the description. 🤙