You are amazing. This is a beautifully explicit video. Very, very well done, sir

This is the best explanation of the WUR on KZread. Thank you sir.

Ive heard that adjusting the wur screw can have a big impact on fuel consumption if it's not set exactly right. That is why i was always hesitant to mess with mine. I eventually just paid CIS Flowtech in Alabama to rebuild and calibrate mine. they do very good work.

I'm always excited for a video of yours . I look up to your work and hope to one day be as knowledgeable as you sir. I also aspire to learn these systems and help others with a passion . I thank you for giving someone like me a vision and dream . To one day be a good technician such as yourself that helps others I own a w126 and I got into this through seeing your videos .

Excellent and in depth as always!

@inovahightechltd

Жыл бұрын

Thanks Mike!

Fantastic! Thank you.

Excellent!

So many cars used k-jet, many still on the road but you cant find anyone in the UK who really understands them these days. I'm seriously thinking of selling my 230E because of this.

@inovahightechltd

Жыл бұрын

Hi bikeman123, bring your 230E to a Bosch Car Service Center. They can fix your Jetronic related issues. A good source to find Jetronic parts is Bosch Classic Website www.bosch-classic.com/de/en Peter

@bikeman123

Жыл бұрын

@@inovahightechltd Thanks but there are no Bosch Classic Service Centres in the UK. Obviously without finding a knowledgable techinician it would be very expensive to change these parts.

@inovahightechltd

Жыл бұрын

You will have to ship everything to Bosch in Germany

@dnbdirector

4 ай бұрын

@@inovahightechltd don't sell your car. Better convert to EFI injection and enjoy your ride again:)

Could you recommend a pressure testing kit? I have an 85 golf gti 8v that's cutting out when cold and a 16v that's cutting out when warm. Both have been sitting for a few years and I think testing the WUR is were ill start. I'm in NZ and I think our fuel might not be the best for these cars.

@inovahightechltd

11 ай бұрын

I bought one from tooldiscounter.com for like 90 bucks almost 3 years ago. It has held up ok for the 3 to 5 times I used it on two different MB’s. My 89 560 and my friends 1980 450SEL It is not the best quality but hasn’t started to leak either. It has the switch valve similar to the original MB/Bosch unit. I verified the accuracy of the pressure gauge before each use. The accuracy has remained steady. This is a universal gauge for all K and KE Jetronic’s www.tooldiscounter.com/product/s-and-g-tool-aid-cis-k-jetronic-tester-sag33800?originalQuery=SAG33800

interesting video, if the warmup regulator was faulty, could you have a situation where the cold start works fine, but hot start after sitting awhile is difficult ?

@inovahightechltd

Жыл бұрын

Yes, but the other causes for that is bad / cheap gasoline (according to Bosch ) which results in vapor locking and vacuum leaks. As to vapor locking, check if your car has a check valve installed on the fuel pump ( these were field retrofitted as recall ) and that your accumulator is working. Do fuel a pressure test to make sure the fuel pressure remains at the in the service manual specified pressure when you turn off the engine for 30 to 40 minutes. If the pressure drops fast then you may have a fuel leak, bad accumulator or a bad WuR Peter

@plymouths1

Жыл бұрын

@@inovahightechltd Thank you Peter

Hello, my regulator on the M116 380 shows 3.4 bar when cold, I supply 12 volts, it rises to 4.1, it turns out a lot. How to fix it?

@inovahightechltd

5 ай бұрын

There are videos from Kent Bergsma / Mercedessource where he shows on how to adjust pressure

Help..my 924 turbo has an erratic idle and as soon as I give it gas it backfires and stalls...Anyone?

@ryanhettema8361

5 күн бұрын

Have you checked your ignitiontiming?

how is the warm control pressure adjusted, if cold control pressure is increased will the warm control pressure also increase

@inovahightechltd

Жыл бұрын

Depends if you have the unit with double or single vacuum chamber. What is the Bosch number on your WuR? They made 132 different versions of it.

@inovahightechltd

Жыл бұрын

Something is wrong with KZread.

@sas8403

Жыл бұрын

@@inovahightechltd i see my message has gone again

@inovahightechltd

Жыл бұрын

@@sas8403 what is that in bar? What is your system pressure, 20c pressure range and operating pressure range?

@sas8403

Жыл бұрын

@@inovahightechltd system pressure is 6.34 bar, manual allows 6.1 to 6.8 bar for this bosch regulator. At 15.5c my COLD control pressure was 2.7 bar, manual allows a range of 2.55bar to 2.9 bar. Warm control pressure was 3.9 bar, manual allows for 4.5bar,,its this warm control pressure that is currently out of spec and i need to increase

You can adjust the nut under the copper plate. You have to take apart the regulator. Others drill into the copper. This video is not really that clear in terms of function and mechanics of how this system works. Can you re do this video please?

@inovahightechltd

5 ай бұрын

It depends on which one of the 101 different Warmup Regulators you got from Bosch. This is a tutorial for 068 WuR. Please specify your model and I will see if I can make video for your model