Would love to see ignition timing tuning

@TPSYKRT

6 жыл бұрын

4G18SOHC yes tuning on hondata!

Couldnt have picked a better name Humble performance💯💯. I met you guys at the track in Maryland. I was with the ramey crew. Alex was mad cool

Proud to be apart of the humble experience! Thank you for everything guys! #StayHumble

We need more vids like this! Timing, transient throttle, idle, two step setup, fuel and timing on different fuels and na vs turbo etc would love to learn more! :D

This is absolutely awesome stuff guys, seeing Alex go threw the logs and explain to everybody the process. Keep it up. Alex eres in mostro!!!! 💪🏽💪🏽💪🏽💪🏽

Thank you for the info! I'm a newbie to tunning and Hondata and I'm trying to learn as much as I can.. keep em coming!

I love this

Love the info, especially being a stock motor and I just happen to be running a jdm b20b so ,loved the info . You guys always put out great content ,hope to one day make it out your way one day. Thank you guys for being solid and real !

Definitely more videos like this on s300

This was a dope video i been busy so finally got to watch it. alex is so calm and clear with his thoughts. Great to see behind the scenes and great information about tuning.

Its a-lot too consider but it isn’t too hard once you understand how to read datalogs. It took me a few weeks to know enough and build the confidence to go ahead and tune my supercharged si and shit was moving at the end 😁.

Great video guys. Can’t wait to see the first Patreon video. I really want to learn how to adjust timing and fuel tables.

That was a good video. Just found your channel, it's nice to see informational vids alongside dyno runs and races.

Love these types of videos, keep them coming.

Humble you are really knowledgeable man u know the thing

Definitely more videos , good learning curve

And here we are. Another video that's gonna have me retuning my car again. I only managed to get 132hp out of my stock b20. Back to the drawing board!

As soon as I get my car finished I'm gonna come see you guys again

you guys rock love the vids so informative i aspire to do what you do one day ...living the dream 4sho

Thanks Humble!!! The tune on my CB had my 2d graph lines crossed like shoe laces xD thanks alot. Saved my ass a bit out in kansas.

Share knowledge, stay humble!

Dope video!

Yeah my k24 graph is dipped because of my long tube manifold but still need so much tunning lol trying to learn tuning DIY.. 🙏👏👏 great video

You guys always post good stuff

@humbleperformance

6 жыл бұрын

Demarius Durrah - Thank you !

Id really like to learn how to tune!

Awesome info! Would love a good tune from you guys with my jdm b20 setup some day

Great video/info. You guys are awesome! maybe cover the timing table next?

Bro your a beast at the tooning more vids like this

Omg I been looking for a video like this one My mixture of air and fuel is a mess and I want to learn more and see my car run clean.

badass vids bro

Humble performance keep up the good videos. Please do more how-to tune videos 👍

Learned alot. Thanks

I would like to see dyno pulls with a turbo b-series setup. Great info, keep vids coming thru

So sick absolutely no one is teaching this stuff you guys are the shit

Hell yeah thats what's up!!!!

Thank You!! 👍🏻

Super video bros.

great info !!!

great job!

Excellent

its all in the tune brothas

best tuner

Thank you so much!!!!!

Great JOB!!! :)

great info

Great vid wish there was tuner training

Intersting!! B20 didnt do so bad!

Will you guys do some live video tuning timing & spark street or dyno of a k24 or k20 stock??

i love your guys videos so much i wanted to ask you i have a 2000 honda crv jdm with the b20 and the p8r head is it worth it to get it tuned by you guys or whoever can?

Nice!!!!

Can ya do this tutorial on kpro with cam angle degrees? I watch this video almost everyday lol

please do a video on ignition timing tuning

Really great video! We would like to see more videos like these! 👍🏽

@humbleperformance

5 жыл бұрын

roger morales 👍🏻👍🏻

Would love to see 2 step tuning or flame tuning

This is dope video man! Please make more and break down the little areas to help ppl that wanna look at their S300 and not feel like a different language.

How did you get the graph lines to move up and down as a whole instead of just adjusting individual points??

Any tips on iat compensation table.

Gud shit

Hey! Can you share this basmap? Want to try on my stock b20b 🙌🏻

Next videos should be a Nos bseries

Where does the shop located at id like to take my swap for a n/a tuned b20b

You guys have a tune basis on KPRO? I’ll be willing to pay

Hello Alex. I plan on putting a B20 Vtec setup in my 96 Civic Dx. I want to run Hondata with a P28 ecu and B16 head. I live in Louisiana and would love to bring you my car to tune when I get it put together. I have ZERO experience using Hondata but I am watching videos to learn. I wonder how our elevation differences would effect my tune when I got back down to my city. I'm about 65 feet above sea level.

@humbleperformance

4 жыл бұрын

It might change a little bit not much. I think we are around 760 above sea level.

I'm sure you've been asked this hundreds of times, but when are you going to balance both Brotors and Humble?

👍🔥🔥

can i have a copy of that basmap?

That's pretty cool, how's tune can bring out another 60 hp

@eddieg1218

6 жыл бұрын

Pretty cool huh! I plan on doing that with my rsx

@zuestoots5176

4 жыл бұрын

60hp can be done but its usually no more than 15 or 20 under the curve. Peak HP doesnt mean shit, its the area under curve that matters. Its like the engine in the F-150 V6 ecoboost. It doesnt make a load of power but makes around 440ft/tq from 1500rpm to 5000rpm. That is a fuck load of area (Usable Power) under the curve.

I need my civic tune 😭

the gains are going to be like a shot of nitrous for the owner..lol

👍

B20 non VTEC ?

What does this thing have done to it? Seems like a lot for a b20 non VTEC. I want that power in my rd1 lol

@zachammons2194

5 жыл бұрын

High comp b20 full boltons. Very healthy motor

would it be worth it to get my crx tuned its got a swapped b20b with and intake and full 2.5" exhaust its running on a ls ecu at the moment

@humbleperformance

6 жыл бұрын

ronnie cason - If it hasn’t been Tuned there is hidden Power for sure.

@ronniecason9807

6 жыл бұрын

The person I bought the car from had done the swap i only paid 1400 for it but i have spent the last 8 months correcting things that the previous owner cheaped out on when he did the swap. Main thing was the engine mounts he bought some cheap ebay mounts just to get the swap done those things had so much vibration it would shake your fillings out replaced those with some innovative mounts at the same time as doing that I also put in a half rad and traction bar as I knew eventually I would do a full exhaust and after that go turbo. Only real things I'm wrestling with now is if i want to go vtec or not. already have the turbo i picked up a holset hy35 I'm only looking to get 300 - 400 whp out of it because i think that anything more then that will be to much for a DD.

Stock b20 revving to 8k rpm?

@ejdedman

4 жыл бұрын

Yup, I've relaxed on my b18b, used to take it to 9. Found out I wasnt making more power up top and putting it through a lot of stress. Now I shift at 7400 when I'm actually pushing it

@speedyme200

4 жыл бұрын

The stock tachometer optimistic rev limiter kicks at 7200

Can the same steps be done with a chipped obd1 ecu?

@douathao7038

3 жыл бұрын

Yes. Don't waste money on hondata ecu.

Why'd it only rev to 5500rpm first pull for baseline?

@xsenceo89x

6 жыл бұрын

Skip01 it was a shitty map. Car was breaking up from too much fuel.

O JEZ, O JEZ,O JEZ, O JEZ. JUS LET THE MAN TALK N TUNE ur jusba camra man they dont say anything.

How much to send me a baseman lol (turbo b20v with 1000cc injectors??

I can learn in thailand.

How u get the check engine light to go off?

@VRafaZ

5 жыл бұрын

its a shift light

So how many horses can you get on a stock tune and then how many with just boltons and a tune?? B20b

@chasecolston

5 жыл бұрын

My stock bottom end, 8.8:1cr b20b with RM stage 2 cams made 172hp and 138tq. It was tuned on e85 by Humble.

@AutoBodyEverything

5 жыл бұрын

Chase Colston high compression head of given you maybe 200hp? Thanks for info

@chasecolston

5 жыл бұрын

Some ITR style pistons, b16 intake manifold(fitted for a non-vtec), and some decent cams should net 200whp.

@AutoBodyEverything

5 жыл бұрын

Chase Colston , is it possible to upgrade the cams on a vtec head and still have the advantage of vtec?

@gameovertune9018

3 жыл бұрын

@@chasecolston any 1/4 miles time and trap speed?

Stock b20 with bolt ons?

@zachammons2194

6 жыл бұрын

Rhonnel Agatep yeah full bolt ons

Alex is ill with tuning 66hp gain!

What fuel?

@humbleperformance

6 жыл бұрын

E85 13B - 91 pump

Fuel tuning on a k series is more anal then a s300. 😭😭

Hardly hear it! They wont tell u everything! Its their secret! If they go into details, customers will learn to tune themselves and they wont have anymore customers!

86hp and they claim they spank 5.0’s at the meets.. lol.. jk..