Nice one sir .. refraining from mentioning your name.. Your videos are quiet informative and educational... waiting for the next part where you take in the plug readings. Thank you

@Yamakaze

4 жыл бұрын

Abhimanyu Injeti thanks Dr, I will try to spread as much knowledge as I can.

@abhimanyuinjeti5326

4 жыл бұрын

@@Yamakaze when I visit Kerala the next time I will visit yoyr place .interested to learn from you sir .

@Yamakaze

4 жыл бұрын

Abhimanyu Injeti sure thing.

@TarunKumar-cs4nl

4 жыл бұрын

Yes one thing is that ..yamakaze buddy ..your dedication and love on 2 strokes is awesome..we are building up our knowledge with your information bro..thanks some of u people are need to our 2 stroke family 😍😍

@Yamakaze

4 жыл бұрын

Tarun Kumar thanks

Great video sir! Thanks for the valuable information! The Kill Switch looks cool! Is it possible to install it on an RX135 ? Is that switch from an Apache ? Also, I’m having this never ending problem : I can hear some sort of a suction sound when I am giving throttle to the engine from idle. But it goes away once the RPM is higher than idling/when I’m riding. I have replaced intake manifold, air filter box to carburettor rubber, air filter...but still the sound persists. Is this making the mixture lean ? What could possibly be the problem ? Thanks!

@Yamakaze

4 жыл бұрын

suction sound at idle would mean issue with one of the things you listed above. check the manifold, install a power box if thats missing in your rxg

@BrattyBiker

4 жыл бұрын

Yamakaze It already has the PowerBox installed. I’ll check again.

@Yamakaze

4 жыл бұрын

Bratty Biker check for leaks. But it should go up when you rev.

@BrattyBiker

4 жыл бұрын

Yamakaze It goes away when I give throttle beyond the idling RPM. Also not noticeable when riding (though it’s been over a month since we’ve all ridden motorcycles lol)

@Yamakaze

4 жыл бұрын

Bratty Biker could be an exhaust leak or the piston movement sound. Cover the silencer opening with your foot and see if that helps you identify the source

Hello. Can see some slight oil leak below the engine..not sure.why in my 03 rxg 5spd. Showed a local mech and he wants me to replace the sprocket seal and silencer gasket. Wanted your advice on this as this is my first bike ever and all wanna be sure

@Yamakaze

3 жыл бұрын

First thing first, get the bike washed completely and find out the source of the leak

Sub cheythu bro nalla videos aanu ✌️🤗 2 stroke lover ❤️👏✌️

@Yamakaze

2 жыл бұрын

👍

Bro how can we make more performance power for rx and all bikes by just porting or what we can do

@Yamakaze

2 жыл бұрын

Watch the porting video

Very helpful video

@Yamakaze

4 жыл бұрын

Glad it was helpful!

Thanks you yamakaze

@Yamakaze

4 жыл бұрын

👍

Bro yamaha rx135 acceleration cable yamaha gladiator ignition on off switch assemblyil direct fit aano

@Yamakaze

2 жыл бұрын

Throttle cable fit alla, engine kill switch opposite aai work cheyyum, on cheyyumbol off aavum, off cheyumbol on aavum

Hello sir a small doubt, magnet weight kurachal. Jerking or vibration undakan chance undo? (Z converted 5s ) jerking on top gear at speed of 30-40 range

@Yamakaze

4 жыл бұрын

I have replied to you I guess, yes it does

@Yc_garage

4 жыл бұрын

@@Yamakaze yes brother.

If i want to put a vm 26 carb in indian rx 135 4s , what would be want to change???

@Yamakaze

10 ай бұрын

It will work, the air filter might need to be changed plus jetting for the air filter

Sir, what is the niddle clip position in rx100 carburettor..pls sir tell me...?

@Yamakaze

4 жыл бұрын

Second from bottom

Sir how much is the clutch freeplay at lever ?of uour rxz

@Yamakaze

3 ай бұрын

2-3mm

Sir the rx engine covers hows the quality I Heard it's have clutch slippery issue how's the quality and price plz

@Yamakaze

3 жыл бұрын

Did you mean the one in the video? It was 5000, quality is great

Nice setings

@Yamakaze

4 жыл бұрын

👍

Hello sir... I have bought a rxz 4 speed with BJ019 block. Is this a local delhi made block because my friends are telling so. Will this create a problem in future as in engine noise or low pickup? Or should i go and buy an original second hand block?

@Yamakaze

3 жыл бұрын

If it’s running fine I suggest not to touch it. If you have performance issues then you can look at getting another cylinder

@newilsurin3095

3 жыл бұрын

Is this a genuine block for rxz? I have heard about y series and e series but this one on every sellers page is mentioned imported. Is that so?

@Yamakaze

3 жыл бұрын

It’s not

Hello brother...my Rx engine is nearly bored .means low pickup and it needs to be re bored..one thing I didnt understand is my silencer sound on idle is good but on running I can get not that exact crisp it sounds like burrrrrrr...can u explain engine performance shows effect on beating of the silencer..r should I clean the silencer...thanks in advance brother

@Yamakaze

4 жыл бұрын

Tarun Kumar wait for the run in period to be over

@TarunKumar-cs4nl

4 жыл бұрын

@@Yamakaze brother that means do I need to wait upto update to my next bore and what Is run in period means 😅

@Yamakaze

4 жыл бұрын

Tarun Kumar after you rebore you need to run the bike normally under 4000 rpm for 1000 kms

What is your opinion about hydrolic clutch in RXZ

@Yamakaze

4 жыл бұрын

overkill, the clutch is already light in the rx series.

Sir, for shogun how many turns do you out?

@Yamakaze

Жыл бұрын

Same as rx

Sir I’m having RX 135 4 speed. I tuned the air screw out to 1.5 turns as you said in the video. But by bike does not pulls above 95 kmph in full throttle. It feels like rpm cutoff in fuel injection bikes. Pls help me bro @yamakaze

@Yamakaze

4 жыл бұрын

2-3 things could be attributed to that all are fuel related though. 1. Bad main jet/ clogged atomiser 2. Incorrect float height 3. Air hole for the tank cap blocked For 3rd, you can ride with the lid open and see if that brings a difference. For 1 & 2 you will have to dismantle the carb and clean it. Before doing anything take a plug reading at that rpm where the problem begins, another important point is never speak in terms of speed, always talk in terms of throttle position. If it’s a carb/ fuel issue it should happen in every gear at same RPM. Rear yezdi wheel can reduce top end

@yuvaneshsudhakar3977

4 жыл бұрын

Yamakaze I only face this problem with full open throttle. Bro.

@Yamakaze

4 жыл бұрын

Yuvanesh Sudhakar main jet

@rxtuningpoint2270

3 жыл бұрын

kzread.info/dash/bejne/YqN4sLxtdsineNI.html

Hello I've already asked you about my suzuki samurai and you helped me i have another thing which I need to know. Previously it doesnt accelerate high automatically when cold starting or first time start in a day or starting after an hour.But now it accelerate very high soon when I start the engine for an hour or a day or a week.And also it accelerate very high when it is ran out of fuel. No throttle cable problem, no choke problem, idle screw adjusted to low. Soon it start to die when I ride for minutes. It doesnt idle. And also poor mileage even the carduretor tuned finely. What is the reason. Is it normal. And also there are no scratches in the bore. Piston was not blown. But the kick is not that much tight enough as previously. I'm planning to change piston rings. Changing rings can fix the problem? Please help.

@Yamakaze

4 жыл бұрын

check for air leaks into the manifold

@BrattyBiker

4 жыл бұрын

Had this problem with my Max 100R. Found that the cracks in intake manifold was causing the mixture to lean out and increasing RPM. Changed the Intake manifold and then : Cleaning,Rebuilding and tuning the carburettor would also fix it. Make sure that you fix the clip in the correct position in the needle. If both doesn’t work, then you need to check compression and if it’s not good, then reboring is the only option.

@saiyasaswi5463

4 жыл бұрын

​@@BrattyBiker hello and the spark plug is fouling every time, even the carburetor tuned perfectly. kick is easy to push down. does spark plugs foul when there is a loss in compression. can the engine regain compression by re-ringing. please help.

@saiyasaswi5463

4 жыл бұрын

@@Yamakaze hi again. hello and the spark plug is fouling every time, even the carburetor tuned perfectly. kick is easy to push down. does spark plugs foul when there is a loss in compression. can the engine regain compression by re-ringing.

@BrattyBiker

4 жыл бұрын

Sai Yasaswi Are you premixing oil ? Is your oil pump working ? Spark plug fouling everytime means you are mixing too much oil. 1) I think your mixture is too lean, caused by an air leak in the manifold (cracks in rubber) so even if carb is perfectly tuned, the leakage will allow more air to enter into the manifold and will make the mixture lean. 2) An easy Kicker does mean that low compression. Either your rings are worn out or yeah, you just need to rebore to the next oversize. What size is your block currently ? Is it sleeved or unsleeved ? My suggestion is to get a new block piston kit, TVS is still manufacturing it so you can get it. If that’s not available, I think you will need to rebore the cylinder, hone it and chamfer the ports along with new piston and rings. Here are some tips so that this won’t happen again : 1) If you are getting a new block piston kit from TVS, that’s the best option. Install it and it will be fine. OR If you are going for the next oversize, make sure to rebore and ask 30 microns for clearance. Rebore the cylinder , Hone the cylinder (Tiny X X X type of overlapping scratchmarks will help the bore retain oil = better lubrication = smoother engine = longer life of rings, piston.etc), polish and chamfer the ports (again, chamfering is smoothening the edge of the ports so that the rings won’t hit them hard when the piston is going up and down) 2) I’d also recommend a full rebuild with a crankcase and engine case clean-up, re-installation of parts along with new bearings, Crankshaft checkup and repairs, New clutch and pressure plates.etc 2) Remove the oil pump, oil tank and oil pipes and store them safely. Block the carburettor’s oil supply provision hole so it wouldn’t suck air and it won’t lean out the mixture. You have to run the engine purely premixing the oil with the petrol in the fuel tank when you are filling up in the fuel stations. 25-30ml of oil per litre of fuel will be perfect. No need to worry about plug fouling or siezures due to oil pump failure (since you don’t have an oil pump to fail) Use Shell Advance VSX or Motul MotoMix for the Engine and any Motul 3000 20W40 Oil for the gearbox. 3) Since you will be opening up the head, my suggestion would be to decarbonize the head using petrol and aluminum foil and rub it till you see the shine. No carbon deposits to be present whatsoever. 3) Remove your silencer and decarbonize it. Change the exhaust muffler to the Shogun replica (you’ll enjoy the sound) 4) Clean and rebuild the carburettor. Make sure the clip is in the second or third position from top, on the needle. Make sure you replace the float gasket. Make sure you clean all the jets and make sure you adjust the float height correctly. 5) Change all manifold rubbers, Check reed valve for proper operation. If they have trouble, replace them. 6) Check air filter box for any cracks or leaks and replace the box if found any. Replace air filter (soak in 2T oil, squeeze and install, it should only be slightly wet with oil) 7) Install NGK BP7HS Spark Plug and use Hero Honda Red cap as it’s a water resistant cap. Complete run-in properly (1000KM). NEVER forget to premix fuel. Do not ride/run in a same RPM. Use all gears, use a wide range of throttle or engine speed.But do not hit redline or stress the engine too much. I hope this helps. All the very best to you!

How many turns I have to do in my rx 135 ,4 speed in the carburettor

@Yamakaze

4 жыл бұрын

mentioned in the video clearly

@duke7571

2 ай бұрын

​@@Yamakazesome other guy was saying 1.75 turns out is mentioned in user manual. Is it true?

@Yamakaze

2 ай бұрын

@@duke7571 try

Which position is correct for rxz tuningg

@Yamakaze

3 жыл бұрын

Video kandu nooku, needle circuit epozanu activate avunath ennu manasilavum

Brought a 03 rxz a week ago. Having issues with cold start. Need to Kick it more than 50 times. Once started then there are no issues felt. Request advice.

@Yamakaze

3 жыл бұрын

Are you using the choke? If no then try using the choke, if yes then try cleaning the carburetor once, change the plug

@rakeshnair4724

3 жыл бұрын

@@Yamakazehad cleaned the spark and tried. the choke cable was missing need to get it added. Will do and and get the carb cleaned and check. Thanks for the feed back. Any brand or spec u recommend for the spark

@rakeshnair4724

3 жыл бұрын

Also please recommend any mechanic if u know from Bangalore as I'm new here

@Yamakaze

3 жыл бұрын

Without choke it won’t start

@Yamakaze

3 жыл бұрын

@@rakeshnair4724 choke is important since a cold bike needs more fuel to start, once started it can go without choke

Bro, what is the original color for blue Rxz and Red Rxz, do you have color code

@Yamakaze

4 жыл бұрын

Satish Damodaran nope, I just gave couple of parts in original color to the painter and he matched it pretty well

@Yamakaze

4 жыл бұрын

Satish Damodaran nope, I just gave couple of parts in original color to the painter and he matched it pretty well

@satishdamodaran7931

4 жыл бұрын

@@Yamakaze thank you Bro

Bro after cleaning the carburetor of rx100 , when started the bike , the rpm suddenly increased to maximum, what should I do

@Yamakaze

3 жыл бұрын

Check the cable, it might be stuck. If you know how to blip the throttle then try that when the bike is running, another possibility is that the slide is installed in the opposite direction

@harshreddy680

3 жыл бұрын

Thank you so much bro , I'll try what u said

Bro തമിഴ് നാട്ടിന്നു ഒരു carb olx വഴി വാങ്ങി ഇപ്പോൾ വണ്ടി starting strouble ആണ് mechanic പറഞ്ഞത് carb ന്റെ parts ദ്രാവിച് jets block ചെയ്യുവാന്ന് ആണ് അങ്ങനെ സംഭവിക്കാൻ ചാൻസ് ഉണ്ടോ? അതോ ടാങ്കിൽ നിന്നും കരട് കീയിട്ട് ആണോ pin ഇറങ്ങുന്ന ah part ആണ് block ആവുന്നത്

@Yamakaze

5 ай бұрын

Both can happen

Can u tell the size of pilot jet and main jet of rxz?

@Yamakaze

3 жыл бұрын

4s or 5s?

@vyshaklep6663

3 жыл бұрын

@@Yamakaze 4s

Sir, I am facing extreme problems from my Rx135 4speed. The mileage is very low. Lesser than 20, I checked and found there is no leakage in the carb still very low mileage. Are my jets gone? Also the bike didn’t start in the morning without blocking the part of the carb from which air filter is connected. Help me out please sir. I never thought Rx series would be soo hard to maintain

@Yamakaze

6 ай бұрын

Check the choke cable, your carb also needs cleaning

@you_tuberrr

6 ай бұрын

@@Yamakaze Ok sir, I had a big doubt on my jets, if jets are faulty then what are the symptoms?

@Yamakaze

6 ай бұрын

@@you_tuberrr depends on the jet general issues include misfires, to no start.

Bro idle speed correct 1100 vachal onu rais cheyith kazhinjal pine rpm 1500 avum pine kurach kazhinjan correct positionil varune idle speed

@Yamakaze

3 жыл бұрын

Reed valve issue Varm, air leak kond varam

@jojofernandez2638

2 жыл бұрын

@@Yamakaze bro reed valve issue indengil starting trouble indavile. ipo Starting problem onum ilaa Idle കൂടിയും കുറഞ്ഞും കൂടിയും കുറഞ്ഞും നിൽക്കുകയാണ് air leak Thane ayirikumo

@Yamakaze

2 жыл бұрын

@@jojofernandez2638 yes

@jojofernandez2638

2 жыл бұрын

@@Yamakaze bro carburetor slide cheruthayit scratch ind athinte issue varo. Oru sugam Ila vandi odikan athaaa idle correct kittunilaa

Sir my yamaha rxz 4speed carburetor setting

@Yamakaze

4 жыл бұрын

s gun didn’t understand

Wheather Same 1.5 air screw for 135 cc

@Yamakaze

3 жыл бұрын

Yes

Hey would a vm 26 imported carb for 5 spd rxz be a good idea? It seems that is what they use for king in Malaysia

@Yamakaze

3 жыл бұрын

King has different ports and a chamber, buying just a carburetor won’t give you any major gains, you will have to jet the carb to work on the Indian ports or else it will misfire

brother, carb turning based on bike running. Air screw should be turn or adjust bike running. Each bike have different air screw turning.

@Yamakaze

4 жыл бұрын

Air screw and idle screw is mainly for idling adjustments to about quarter throttle position. These do not play any significant role once the quarter throttle position is crossed

@rxtuningpoint2270

4 жыл бұрын

while doing the aircrew adjustment, bike should be running engine.

@Yamakaze

4 жыл бұрын

@@rxtuningpoint2270 for airscrew you can do on a non running bike but idle screw adjustment is done on a running bike

Bro can you please make a future video on crankcase resurfacing.

@Yamakaze

4 жыл бұрын

sure

Sir anticlock wise petrol screw khol nea sea petrol jda jata hea ja kam 😩 tight krnea si kya hota hea or khol nea sea kya please reply

@Yamakaze

2 жыл бұрын

Tight karne se slide upar uth jata hai

@Aimgodplaz

2 жыл бұрын

Sir mea mixture screw ki batt kr raya hu

@Yamakaze

2 жыл бұрын

@@Aimgodplaz mein bhi usiki baat kar raha hoo, air screw is the little screw hope you are not talking about that

@Aimgodplaz

2 жыл бұрын

O sorry sir that's air screw uska hi push raya tha uski setting kya hea

@Yamakaze

2 жыл бұрын

@@Aimgodplaz full tight then 1.5 turns out

❤❤❤

@Yamakaze

10 ай бұрын

👍

I have a problem of bogging down my rxz when i runs with a full open throttle....also it brings lot of smoke while bogging down....is it the problem of main jet?...if yes, what should i do

@Yamakaze

3 жыл бұрын

You have to take a plug reading with a fresh plug, specifically at the rpm where the bogging happens. Based on the reading we can look at the next course of action

@nihadh3277

3 жыл бұрын

Yamakaze i took it with a new plug and it happens from 7000 rpm

@Yamakaze

3 жыл бұрын

At what throttle position? And what does the plug read, lean or rich?

@nihadh3277

3 жыл бұрын

Yamakaze after 3/4 of the throttle position....i didn’t understand about lean and rich in plug reading

@nihadh3277

3 жыл бұрын

Yamakaze i have the same problem in every gear at that throttle position

Is this the same procedure for tuning carburettor for RXG ??

@Yamakaze

4 жыл бұрын

Yes

@shreyas_3672

4 жыл бұрын

@@Yamakaze my RXG doesn't have RPM meter then how to take the reading ??

@Yamakaze

4 жыл бұрын

shreyas ms if you are planning to set the idling RPM you have to do it based of the sound, turn the idling screw anti clock will till the bike starts to die, then turn quarter of turn clockwise, do it when the engine is warm

@shreyas_3672

4 жыл бұрын

@@Yamakaze thanks for your valuable reply

@Yamakaze

4 жыл бұрын

shreyas ms 👍

I have a RXG 1996 model gives around 22-24 kmpl.How to increase its mileage ??

@Yamakaze

4 жыл бұрын

First of all find out why is mileage so low

@shreyas_3672

4 жыл бұрын

@@Yamakaze how to know about it bro ?? According to yor how much mileage would RXG give ??

@Yamakaze

4 жыл бұрын

shreyas ms the bike should give anything above 30, if it’s stock. Check for leaks, also make sure your method of checking mileage is consistent. Do it reserve to reserve. Once the bike host reserve pour about a liter of fuel and note the kms till it hits reserve again

@shreyas_3672

4 жыл бұрын

@@Yamakaze thank you

Will an iridium plug make a difference in performance on a 2stroke?

@Yamakaze

3 жыл бұрын

It will but if your air fuel mixture or oil mixture is wrong the plug will get shot easily

Is there any leak in silencer?

@Yamakaze

4 жыл бұрын

Ak updates no, we modified the flute to increase the sound

@Yc_garage

4 жыл бұрын

@@Yamakaze ok sir i thought it may due to mouth packing leak. Sir could you pls tell me how to add two engine on a single bike , i have seen some bikes in other state like rx200, rx270.

@Yamakaze

4 жыл бұрын

Ak updates not that simple, you need to fuze 2 cranks and the crank case needs to be fused. The costs would run more than buying a decent twin plus it will not run like a twin should run. It will not be road legal.

@Yc_garage

4 жыл бұрын

@@Yamakaze ok sir , any; idea about gb and clutch , is it required to extend the secondary gear box shaft for fitting clutch? I m curious about how it function.

@Yamakaze

4 жыл бұрын

Ak updates you will have to increase the length of the output shaft and balance it. If you are seriously considering this then try doing it on a max 100 and I can share some information if you are serious in Pursuing it further.

Finally a morning video 😂😂

@Yamakaze

4 жыл бұрын

yeah, actually last few videos were morning videos

Bro...can we have a video of fixing battery...wiring of rxz...

@Yamakaze

4 жыл бұрын

very simple. let me try

@arshadarsha8847

4 жыл бұрын

@@Yamakazethank u bro... only that lighting and meter to the battery....

@Yamakaze

4 жыл бұрын

@@arshadarsha8847 I have done that video of connecting parking to the battery. plus there are other you tubers who have done it in great detail

@arshadarsha8847

4 жыл бұрын

@@Yamakaze ohhh...bro i searched a lot....but i couldnt get.......can u plse suggest if any

Can a siezed suzuki shaolin engine be fixed

@Yamakaze

4 жыл бұрын

Ahmed Huzaifph of course. Depends on what all needs to be refurbished/ replaced. Can be definitely done.

@ahmedhuzaifph7511

4 жыл бұрын

@@Yamakaze tnx and when is the next suzuki shaolin restoration video coming up and please do make a mileage and a review video about it

@Yamakaze

4 жыл бұрын

Ahmed Huzaifph the Shaolin is stuck due to lack of spares as the supply chain has been affected. I will look for the spares locally once the shops open

Are you from TVM by any chance

@Yamakaze

4 жыл бұрын

Yes

@sibidas9022

3 жыл бұрын

Subscription from a Trivandrian..

Kawasaki hd3 indiayil kittille broh

@Yamakaze

4 жыл бұрын

ariyilla

Brother y the rx does not have registration plate.

@Yamakaze

4 жыл бұрын

Paperwork in progress

@nairratheesh1

4 жыл бұрын

@@Yamakaze oh that's cool. Bro when I was in collage I had one rx135 five speed. I still regret fo its sale.

@Yamakaze

4 жыл бұрын

rk k there is a bike waiting for everyone, just need to find it

@nairratheesh1

4 жыл бұрын

yup thats So true bro.my next project will be a shogun THE BOSS.

@Yamakaze

4 жыл бұрын

rk k 👍

Bro pls recreate this video on malayalam 🙏🏿🙏🏿🙏🏿

@Yamakaze

2 жыл бұрын

Malayalam video und bhai

Ee video malayalathil post chyiuvo

@Yamakaze

2 жыл бұрын

Yes

Bro My Rx 135 is over heating bro what is the reason bro

@Yamakaze

4 жыл бұрын

Biker Santhosh you need to check if it’s running lean or rich, if the timing is advanced then also this can happen. When did you rebore your cylinder?

@bsvlogskannada95

4 жыл бұрын

@@Yamakaze I didn't rebored bro

@Yamakaze

4 жыл бұрын

Biker Santhosh it’s a very vast topic, give me more information when did you observe the overheating? Are you using oil pump or premix? Any changes you made to the bike?

@PC-Vlog31

3 жыл бұрын

Same problem Iam facing in my rx 135 speed

One and half?

@Yamakaze

3 жыл бұрын

Yes

@PC-Vlog31

3 жыл бұрын

What is mean that?

@PC-Vlog31

3 жыл бұрын

Close your camera bro

@Yamakaze

3 жыл бұрын

@@PC-Vlog31 what are you trying to say?

മച്ചാനെrxz ഒപ്പിച്ചു തരുമോ

@Yamakaze

4 жыл бұрын

illa man, enikku source illa. Olx il nokku

Hindi nhi ata hai kya

@Yamakaze

Жыл бұрын

English nahi aati?