Another informative upload from Lords-Electrical. Voted!
@philforest4747 Жыл бұрын
Useful video as people don’t maintain appliances then wonder why they don’t work
@LauraBidingCitizen Жыл бұрын
Much appreciated! Mentioned you when I ordered my washer & dryer from AO actually lol! £713 later.. 😩 Still, has to be done. Decided on the Haier HW80-B1439N_WH (8kg), & the Indesit I2D81WUK_WH Condenser Tumble Dryer. Many thanks for all of your help & guidance through your videos & comments!
@lords-electrical
Жыл бұрын
Thanks for the feedback, hope you are happy with the new appliances.
@riverdeep399 Жыл бұрын
Thanks for the info 😊 I bought a second hand white knight and the heat isnt great, barely warm, i'll start with these and then replace the element.
@MiR-bp5vxАй бұрын
Is it possible to open the condenser? I find a lot of hair that’s long and won’t get out with a shower hose
@lords-electrical
Ай бұрын
Unfortunately these are normally sealed units and can't be opened
@MiR-bp5vx
Ай бұрын
@@lords-electrical thank you for replying. I managed to clean it took some time though but well worth it. Thanks
@washdrytvbyhotpointlover200911 ай бұрын
Thanks for your help 👍 🙂 🙏
@lords-electrical
11 ай бұрын
My pleasure, glad it was helpful for you.
@Miniscule91210 күн бұрын
The condenser is difficult to go back in. Any tips on getting it back in?
@lords-electrical
6 күн бұрын
Annoyingly the only thing you can really do is to ease in in gently and make sure it lines up properly.
@thisnthat6972Ай бұрын
Iv cleaned out the condenser immaculately and my hot point is still giving the clothes steaming hot and wet, it is not drying engineer came out and ordered new condenser, replaced condenser and issue is still the same even though the sensors are all working and the fans are fully working any ideas?
@lords-electrical
Ай бұрын
If the sensors are clean and the engineer and changed the condenser unit and checked the filters then there isn't really anything else you can do. I would contact Hotpoint again and say it is still faulty and hopefully get them back out to sort the problem out.
@jennycampbell48785 ай бұрын
I have hotpoint condenser dryer. It’s showing the Red fault button/buzzer. It’s just less than 2 years old. Have emptied both filters and emptied the water tank. Buzzer still there. I have switched off and on. Any help appreciated.
@joanaximenes8 ай бұрын
My thumble dryer is always black out when I turn it on, what cause this. If you can help?! Much appreciated
@omarchagra87177 ай бұрын
Thanks it’s work
@helenbicknell66595 ай бұрын
Question from someone who knows nothing about electronics except water and electric doesn’t mix! You say pop big filter in shower then pop back in… do I need to leave the inside to dry totally first or can no just dry the bits I can reach then good to go? Thanks x
@lords-electrical
5 ай бұрын
If its the condenser unit then you should be ok to put that in if its still damp, but if its the main filter inside the dryer then that will have to be left to dry thoroughly before putting it back into the machine.
@helenbicknell6659
5 ай бұрын
@@lords-electrical thanks, it’s the big metal box filter that pulls out at the bottom not the mesh, showered it and left to drain/dry in bath overnight x
@rekky.2 ай бұрын
Removable condenser wow what model that is?
@lords-electrical
2 ай бұрын
That will be the Hotpoint H3D91W
@art83islife2 ай бұрын
hi i cnt get it back in :/
@jhovents941511 ай бұрын
What if the drum inside is not turning, there is heat but drum inside is not working, clothes is steady in a one place,
@lords-electrical
11 ай бұрын
Sounds like the belt has broken. Hopefully this should be a fairly simple fix for you without having to replace the whole dryer
@daveramsey82908 ай бұрын
-30 error how do i solve
@zefangmeisterbob7592 Жыл бұрын
Great but not long enough
@lords-electrical
Жыл бұрын
I agree, i could make the video a lot longer but a KZread Short is under 60 seconds.
Пікірлер: 32
Another informative upload from Lords-Electrical. Voted!
Useful video as people don’t maintain appliances then wonder why they don’t work
Much appreciated! Mentioned you when I ordered my washer & dryer from AO actually lol! £713 later.. 😩 Still, has to be done. Decided on the Haier HW80-B1439N_WH (8kg), & the Indesit I2D81WUK_WH Condenser Tumble Dryer. Many thanks for all of your help & guidance through your videos & comments!
@lords-electrical
Жыл бұрын
Thanks for the feedback, hope you are happy with the new appliances.
Thanks for the info 😊 I bought a second hand white knight and the heat isnt great, barely warm, i'll start with these and then replace the element.
Is it possible to open the condenser? I find a lot of hair that’s long and won’t get out with a shower hose
@lords-electrical
Ай бұрын
Unfortunately these are normally sealed units and can't be opened
@MiR-bp5vx
Ай бұрын
@@lords-electrical thank you for replying. I managed to clean it took some time though but well worth it. Thanks
Thanks for your help 👍 🙂 🙏
@lords-electrical
11 ай бұрын
My pleasure, glad it was helpful for you.
The condenser is difficult to go back in. Any tips on getting it back in?
@lords-electrical
6 күн бұрын
Annoyingly the only thing you can really do is to ease in in gently and make sure it lines up properly.
Iv cleaned out the condenser immaculately and my hot point is still giving the clothes steaming hot and wet, it is not drying engineer came out and ordered new condenser, replaced condenser and issue is still the same even though the sensors are all working and the fans are fully working any ideas?
@lords-electrical
Ай бұрын
If the sensors are clean and the engineer and changed the condenser unit and checked the filters then there isn't really anything else you can do. I would contact Hotpoint again and say it is still faulty and hopefully get them back out to sort the problem out.
I have hotpoint condenser dryer. It’s showing the Red fault button/buzzer. It’s just less than 2 years old. Have emptied both filters and emptied the water tank. Buzzer still there. I have switched off and on. Any help appreciated.
My thumble dryer is always black out when I turn it on, what cause this. If you can help?! Much appreciated
Thanks it’s work
Question from someone who knows nothing about electronics except water and electric doesn’t mix! You say pop big filter in shower then pop back in… do I need to leave the inside to dry totally first or can no just dry the bits I can reach then good to go? Thanks x
@lords-electrical
5 ай бұрын
If its the condenser unit then you should be ok to put that in if its still damp, but if its the main filter inside the dryer then that will have to be left to dry thoroughly before putting it back into the machine.
@helenbicknell6659
5 ай бұрын
@@lords-electrical thanks, it’s the big metal box filter that pulls out at the bottom not the mesh, showered it and left to drain/dry in bath overnight x
Removable condenser wow what model that is?
@lords-electrical
2 ай бұрын
That will be the Hotpoint H3D91W
hi i cnt get it back in :/
What if the drum inside is not turning, there is heat but drum inside is not working, clothes is steady in a one place,
@lords-electrical
11 ай бұрын
Sounds like the belt has broken. Hopefully this should be a fairly simple fix for you without having to replace the whole dryer
-30 error how do i solve
Great but not long enough
@lords-electrical
Жыл бұрын
I agree, i could make the video a lot longer but a KZread Short is under 60 seconds.
@buzby303
8 ай бұрын
Or you cud slow it down 😆
That's a tiny dryer compared to the US models
@Albieshutz
11 ай бұрын
Well, American machines are way, too big
@twwoody813
3 ай бұрын
@@Albieshutz Big machines for extra big people 😁