Looks super easy when having all right tools and stuff

Nice , like the sound effects 👌

Video was helpful thanks 💪🏽

@kraftingkars

3 жыл бұрын

No problem!

Great information good video

@kraftingkars

3 жыл бұрын

Thanks man!

thanks for the tutorial!!! and bruh Damn your knuckles have seen better days!

@kraftingkars

2 жыл бұрын

No problem!

Nice job

@kraftingkars

2 жыл бұрын

Thank you sir

Nice sfx

Hey question, you moved your proportioning valve now did that give you any issues with your clutch master cylinder fitting or did it clear with no problem sorry I’m new to your videos but I don’t think mine would clear being mounted there ?

@kraftingkars

2 жыл бұрын

Cleared no problem! You can see better pictures of my engine bay at afton.voigt.ej8 on Instagram

You should be using a 37 degree flaring tool, because those fittings are AN. You won’t find that at your local auto parts. (the standard is 45 degree)

@kraftingkars

3 жыл бұрын

Good point man! Luckily mine still sealed just fine, I'm guessing because the lines are so soft they conformed when I tightened them down!

@chaserivers4058

3 жыл бұрын

@@kraftingkars You’ll probably be fine, just passing along the info for the next guy.

@tavog6795

11 ай бұрын

I read this before I did this, and my f fitting is leaking on one of the connections.. I should’ve listened to you! Do you know where to get the 37 degree flaring tool without ordering it?

@chaptv6542

8 ай бұрын

@@tavog6795summit

Hey man my local Oriellys has the flaring tool but I’m not sure what degree it is.. did you tell them specifically you wanted a 37 degree flaring tool? Or just use what they had. On chase bays they say to use a 37 degree tool. So jw. Cause I’m about to start on my chase bays kit as well parts are coming in tomorrow thanks man I hope you can get back to me ASAP as I’m stuck right here 😓

@kraftingkars

3 жыл бұрын

Just the regular o'reilly's brand flaring tool is what I used, I rented it over the counter. No leaks yet

Will this work with a 89 crx?

Can you do a video on how to adjust/use the chasebays proportioning valve?

@kraftingkars

Жыл бұрын

I couldn't find any good information online about it. On top of the knob it shows you which way to turn it to adjust your bias. I dialed it in by making my adjustment, going for a test drive with some hard braking, then going back and making adjustments until I liked how the car felt

If I wanted to just buy the fittings and and Bias valve and run custom hard line. If would work right? Are Those female fittings 3an that screw on to the T banjo?

@kraftingkars

Жыл бұрын

Yessir, and yep they are 3an

How was the process on bleeding the brake system I bought this kit but I'm not sure how to go about bleeding the brake system

@kraftingkars

Жыл бұрын

Bleeding the brakes is exactly the same as the factory procedure! Where you fill up your master cylinder, and bleed the fluid out using the bleeder screws on your calipers. Here is a good link for ya honda-tech.com/how-tos/a/honda-civic-how-to-bleed-your-braking-system-374619

Great video man, would this still work well with a rear disc swapped civic? Mine's a 97 LX I'm gonna be swapping out with integra disc brakes.

@kraftingkars

2 жыл бұрын

Yep it should work! I'll be swapping to rear disks soon! I'll be sure to make a video on it. One thing people recommend after getting rear disks is to get a larger master cylinder out of an integra

@kraftingkars

2 жыл бұрын

Dc2 integra that is, the best option is probably the type r master cylinder

Will this brake line only use a single flare or a double flare?

@kraftingkars

3 жыл бұрын

All the flaring is only single flare

@drevil5546

Жыл бұрын

@@kraftingkars For automotive it should definitely be a double flare.

How's the braking after the installation? I just got done doing poor mans 5 lug conversion. Would this work on my setup? Me Driving a 95 coupe. 1 inch MC/BB off a 99 teggy.

@kraftingkars

Жыл бұрын

Braking is great! Keeps the 400whp under control! Check out the chase bays website, they should have a setup that will work for you!

@b18c1_yang2

Жыл бұрын

@@kraftingkars thanks

@b18c1_yang2

Жыл бұрын

@@kraftingkars how's it compare to the 40/40 proportioning valve? Any difference? Just better or alot better ?

so the valve only works with the rear brake?

@kraftingkars

2 жыл бұрын

It distributes braking power between all 4 brakes

Where you get that tool from ?

@kraftingkars

3 жыл бұрын

I rented the flare tool from orielly's auto parts store

And can you also run that brake line kit with a brake booster delete

@kraftingkars

3 жыл бұрын

If you go to the chase bays website, they have a drop down menu where you select your chassis, and master cylinder type! They have an option for every combination!

@ketchupej281

3 жыл бұрын

@@kraftingkars for sure thanks brother for the info it helped out a lot , I went 5 lug and my H2b skunk 2 manifold sit far back so I’m not able to run a Gsr brake booster , and my dx booster is not holding brake pressure at all

Did you have abs before?

@kraftingkars

3 жыл бұрын

Nope, no abs here

@wadecoopman1942

3 ай бұрын

Does this kit allow you to keep ABS and have it work with the adj prop valve?

What the name on that kit bud

@kraftingkars

2 жыл бұрын

www.chasebays.com/products/chase-bays-brake-line-relocation-94-01-integra-92-00-civic-oemc?variant=37009011593

bro can you give me model number of that brake lines kit that looks easier than what I've been seeing on KZread

@kraftingkars

3 жыл бұрын

CB-H-9600OEMC is the SKU number of the product. This is for a 92-00 Civic with OEM master cylinder and no ABS! It is a real easy install, the other videos out there just suck at explaining I guess.

@reddragonx8799

3 жыл бұрын

Thanks bro and yes I saw your video how easy it was to do it I see other people drilling through the firewall I really don't want to do that

@reddragonx8799

3 жыл бұрын

@@kraftingkars hey bro I can't find them what's the page you get it on?

@kraftingkars

3 жыл бұрын

@@reddragonx8799 www.chasebays.com/collections/honda/products/chase-bays-brake-line-relocation-94-01-integra-92-00-civic-oemc?variant=37009011593

@reddragonx8799

3 жыл бұрын

bro one more question which brake master cylinder do you have I bought one from B blox and it only has one hole in my original one has two holes from the cylinder

What the heck happened to your knuckles

@kraftingkars

3 жыл бұрын

I cut them up pretty bad when I was learning to get up on a wake skate

booster delete

@kraftingkars

3 жыл бұрын

Neverrrrrrrrr😆

you should hire a better videographer, very shaky