That grass needs full sun brother. And lots of water. 🤘

@ginger_nosoul

2 жыл бұрын

Demo... pin this comment before ya grass dies!!!

@ImBigOunce

2 жыл бұрын

I love that the lawn care nut watches all the same channels I do

@ImBigOunce

2 жыл бұрын

Also I hope people see this and understand that this guy helped cleetus source and plant all the grass for the freedom factory and actually helped cleetus maintain it as well as possible!!!

@ginger_nosoul

2 жыл бұрын

@@ImBigOunce ya most cleet fans are well aware of thie

@jaywest4102

2 жыл бұрын

You, Cleetus and the sod farm need to figure a way to surprise install a bunch of sod around Matts plug

I love that you call that dirt…. That was almost exclusively rocks.

@beanperry

2 жыл бұрын

That is dirt in Texas

@mybackhurts7020

2 жыл бұрын

That’s rich soil to me come to the desert sometime

@myitbos1335

2 жыл бұрын

@@beanperry At least in the hill country area. My dirt over in Houston is a tad bit darker...and wetter and stickier. And yeah, that poor grass plug is doomed.

@IamBATMAN2024

2 жыл бұрын

Dust!

@620rejects3

2 жыл бұрын

Yeah🧐bout like rocks and dust😂😂matts not a farmer for a reason

Run a line from the drip.pan on your little a\c to your freedom patch and that way anytime the a\c is on (when its hot) your grass is getting a little water

That grass have way more chances of surviving than the weld on that diff… #thatgrassisdead

Watching Demo Ranch kill the Freedom Factory grass in real time. Fun. Maybe some proper soil, a little fertilizer and a drip irrigation system would keep it alive.

@DawsonWhite123

2 жыл бұрын

And he could of broken up the root ball but there’s no point now.

@ToMu29

2 жыл бұрын

Yeah you know this is Matt u talking about right ?

@rbianchi1983

2 жыл бұрын

Diesel bros already destroyed the grass multiple times 🤣

@joesguiltyguitar

2 жыл бұрын

even Matt can have a green thumb 🤪👍 LoL

@regionalrange3052

2 жыл бұрын

You invest too much in a youtuber. Lol

Hey Matt, when using brake clean and then welding it can off gas a very dangerous fumes. So in the future make sure to get non-chlorinated brake clean if you are going to weld after using brake clean. Stay safe!

@mikecrystalrobert7898

2 жыл бұрын

Safety 3rd u don’t need to worry them his baby lungs they will fall out and grow man lungs

@jeremystedman1942

2 жыл бұрын

Was coming to make this same comment. That is not to be messed with. It will kill you. Heated brake clean + argon from a mig makes a poisonous gas that is lethal in like 3 parts per million... use acetone. Works just as good but is safe!

@fireson123456789

2 жыл бұрын

@@jeremystedman1942 as a welder and emt I was going to comment the same thing. I've seen the after effects of it 2x and it's not something I want to hear about happened to him

@ginger_nosoul

2 жыл бұрын

Didnt know this was a thing so thank! Il keep a look out from now one!

@dexman9908

2 жыл бұрын

Tetrachlorethylene mixed with UV creates phosgene gas. Also used in WW1 , wicked stuff

Always push straight down on O-rings never just drag your fingers it stretches the O-ring then it don't fit properly and it changes the thickness of the O-ring so then the seal fails

@Apetry14

2 жыл бұрын

You helped me, I’ve had multiple gaskets fail on me, will try that next time!

Off the ranch - you get anything from house building, gardening, guns cars, wholesome family moments and literally anything that matt feels like!

@justinvlogs510

2 жыл бұрын

And we’re hooked everytime!

@Zankaroo

2 жыл бұрын

And most of it is actually on the ranch lol.

@ginger_nosoul

2 жыл бұрын

What was the end to ya sentence?

Cleeter said himself those are NOT from the FF , its the same type that he has from the same people he bought it from, but its not the actual grass from the FF sadly

That trailer attachment over the grass was brilliant. Heavy enough to keep the animals from moving it and plenty open enough for sunshine. Water water water Matt. Woot woot!!!!!

@user-is7ur4pg8y

2 жыл бұрын

kzread.info/dash/bejne/gJqd0tSqeJu8otY.html

There is a tool with a long metal rod like the one that old people use in India at rural places and that rod has a small bowl at the end of it with two holes ...one to fill gunpowder and one to let air in for the combustion when you stamp it on the ground hard ... The big blast sound can be heard for many kms and it helps the animals to keep away from the farm... I thought it would be helpful for you 😁

Matt the weld job on the rear axel is good But unless you have stronger axel shafts you Will snap them with that kind of horsepower! I still recommend a Ford 9 inch!

@SimonElenor

2 жыл бұрын

As far as I know that car normally came with a 10 bolt unless it was an SS. However you can correct me if I am wrong but the 10 bolt or 12 bolt never came with a third member that unbolted. I do believe that is a 9". Also those welds will not hold, he didn't preheat it.

@Dean_Ranga

2 жыл бұрын

It needs the whole thing filled with weld. Not just welding the gears together.

@SimonElenor

2 жыл бұрын

@@Dean_Ranga That as well just castings and forging needs to be preheated before it is welded. All this is irrelevant anyway a minispool is $40! And would be alot stronger and more reliable.

@SimonElenor

2 жыл бұрын

This is why I say he needs some knowledge in this shop. Playing around like this with vehicles will get you killed. No place to play around with safety!

@gunner4544

2 жыл бұрын

If ya didn’t bend it, ya didn’t send it lol… Matt, reality is welding rear ends done however commenters say is nes pas bon. Just spend a few bucks and buy a proper implement as it is more reliable and safer. Your engineer wife should be able to make that discernsation for you even if she may not have a mechanical strong suit.

Now you need to make a grass watering system similar to the chicken watering.

@slashv2

2 жыл бұрын

Good idea.. that means that we are gonna get a 10 part video on the watering system xD

I agree with everybody on the welding of the dif if I were you I'd ask the kid that did your five time to do it for you also just coming to the realization that a burst hydraulic line mixed with a tire fire is not going to be an ideal situation you might want to put some fire blankets in that trunk or pull that back seat out and put a firewall in

@Kilz78

2 жыл бұрын

Need to use a glycol hydraulic fluid. It has a way way higher flash point than your normal ISO 32 or 46. We use it around our high heat furnaces that run at 975C. It won't catch fire but sure will smoke it up.

I saw cracks on the axle carrier. Probably caused by the heat during welding. That's a cast iron piece. Dollars to donuts, it will fly apart during the first burnout.

@dailyg2719

2 жыл бұрын

To bad he would be able to get the axle clips in!!!

@ginger_nosoul

2 жыл бұрын

I thought i saw something but wasnt sure!

@dailyg2719

2 жыл бұрын

Guys to get the axle clips in he has to remove the large pin that gos thru the spider gears install axles then clips pull outwards on axles and clips sink into tubes then reinstall spider gear pin then weld. Unless he has bolt in axles like on a 10 ½ or larger gm axle. Someone jump in here and stop me if I'm wrong please.

Usually welding something that hard, you would need to heat them up in an oven. You'll be lucky if that weld holds.

@PhilG999

2 жыл бұрын

Welding diffs is a bad idea all around! Cheaper in the long run just to get a spool and be done with it. Or even put a decent Posi in it. I mean. It's a Chevy. How many thousand diffs are in the boneyards?

@ericlewandowskivlogs

2 жыл бұрын

@@PhilG999 exactly, but in Matt fashion, he waited until a week ahead time to finish. He should try to get one from a junkyard though, I agree with you.

Hey Matt I did demolition derby’s for years welded dozens of differentials cars trucks... so if your going to mig weld use a torch to burn all oil off ... put 4 hot passes in between each set of gears on both sides don’t do just one side it won’t hold

@Leroys_Stuff

2 жыл бұрын

A man of culture lol nothing better than crashing cars

Run the fuel rail crossover on the front of the engine and cap the side that's too close to the firewall, then run your feed to the drivers side. (Assuming you're using a corvette fpr/filter.)

Hey Matt love that you have a lowrider. Hope to see you at a few shows man.

Hey Matt, thanks for entertaining all us Demolitia fans out here.

The grass is actually not from the freedom factory but from the same grower in Florida that supplied it. Still cool though!

@BettaLandscaping

2 жыл бұрын

How do u know?

@revredbeard3289

2 жыл бұрын

He explained it in one of his videos.

@vbjage

2 жыл бұрын

@@BettaLandscaping it was in Cleetus's video, he teased it was from his infield, but then later clarified it wasn't, but that it was the same grass he has.

@BettaLandscaping

2 жыл бұрын

@@vbjage oh ok thx

Oh man you got to redo that diff Matt. It'll definitely explode.

@JedemPoKucama

2 жыл бұрын

Made me cringe when I didn't see a plate in there😬

@coopaloop9560

2 жыл бұрын

@@JedemPoKucama I'm pretty sure he can order a Detroit locker diff and get it to him before the competition. Or put that plate in there.

@Leroys_Stuff

2 жыл бұрын

There’s the right way the wrong way and Matt’s way I’d put plates myself.

Matt, you wanna tip for welding gears? Power brake the car before taking it apart and see which side wants to spin more. I believe it's the passenger side. Then figure out how those spider gears were spinning and only weld the side of the gears that's going to pinch the weld, not pull the weld apart. You'll keep a lot of the strength of the gears by not melting to much of them. That's a little trick that demolition derby guys that I know do up here in Michigan and it really helps

0:36 Annie rocking out to the Hello Fresh intro Matt is doing 🤘😄🤘

When the demo ranch is done we need demolition podcast 💯💯👌

for how much work Burke has helped with, it would be awesome to see him on an episode of Demolition Ranch

Matt just a suggestion.... Knock the pin out from the middle of the planetary gear set. If you break a half shaft you will be able to knock the broken piece out of the splines without having to remove the diff 👍

Hey Matt, if you don't want to forget to water the grass, you'll need a automatic watering-system... I use it all the time, when I'm not home... Hope this helps :)

I wonder how Matt actually sees his audience. Does he really think I wouldn’t be interested in watching him take care of grass? Cus I have a feeling most us are

@yyfreak1637

2 жыл бұрын

Id watch a full five hour video of literally nothing if it was posted on this channel.

Love your videos I'm in I am from Kentucky I'm only 15 and I will watch your videos forever you make the best videos ever love you Matt

@NOQUARTER_

2 жыл бұрын

Sounds like a man crush to me. 🤔😱

@davidearl9563

2 жыл бұрын

@@NOQUARTER_ LOL he makes my day better

Matt, the grass is not actually from the Freedom Factory. It's from the nursery that supplies Cleetus' sod.

Annie just chilling jamming out to matt's commercial lol

@warrenmichael918

2 жыл бұрын

She is Mere 2.0 , i think shes gonna be the one that takes the Demolition Ranch torch!! LOL she seems like the one with that crazy little attitude that will do great once shes older!

As a Aussie who knows abit about skiders, your gonna need to weld that dog way more or she gonna grenade. Even just chuck some bolts in there

@Deepwaterjew

2 жыл бұрын

That's what we did with my buddies drift car, we had taken it to another buddies shop because he had some plate we could use. He neglected to inform us that he didn't have a way to cut said plate. So we just cleaned up some bolts and welded that shit in. That was about 10 years ago and it's still holding.

@geoffrey6000

2 жыл бұрын

Yes, you need way more than what he did.

@indianaslim4971

2 жыл бұрын

The only way that survives would be the small 14 inch tires.

@drum4370

2 жыл бұрын

Hey.... we're here for a good time not a long time.

@cj393

2 жыл бұрын

Matt is no way near a car guy, I actually think he should stick to guns...

Matt, on the Ibeam of the new DemoGarage stairs you should get little replicas or pictures of a lot of your firearms to put on the Ibeam at every step, start at the bottom step with the smallest caliber and end at the top step with the largest, the 50-BMG.

Best part of the video, Ins-Annie jammin out while Matt's doing the commercial!!! Priceless!

It is not, actually, from his track, it is from the same company, that put in his grass. But still nice to have. Come on Matt, real Men don't read the instructions.

@JnixMarshel

2 жыл бұрын

He was just bored and looking at pictures.

I'm only a little disappointed freedom seeds weren't used to dig the hole for the freedom grass

A post hole digger works perfect, because that is it other than 2 shovels put together

As a kid growing up in Paris Tennessee my mom worked at the Holley carburetor plant 20 years later in California my friend calls me to help repack rochester carbs in Holley boxes

Matt: buys a different fitting to make the fuel line work. Me: I’ve got a hammer, it’ll fit.

He DID NOT chop out grass from the Freedom Factory. He bought the same type of grass and then had them chopped into squares to sale. He stated that in his video a few days back when he was advertising the bundles.

The Lawn Care Nut could get you set on growing that grass since he maintains the Freedom Factory grass. Heck he could probably help get you some grass for your house.

I build offroad rigs constantly and Matt buddy! you need to weld every part on the spiders to the carrier or you will kick yourself first burnout

Needs the "Lowrider to get a little lower" 🤣👍👊

it will break! you need the plates, once you put all the power and torque to the diff, it will pop, put the plates in and save yourself the time of doing it all over again.

Cool project, that diff centre is going to go boom... if not that, the toothpick axles will snap. Bite the bullet and order a 35 spline 9" with a Strange Spool.

Hey Matt, love the Impala. I own a '64 Bel Air Sedan which is very similar to your car. My car was originally bought by my great-grandfather when it was brand new and has been in my family ever since. I'm actually making the car roadworthy after sitting for 30+ years and upgrading to a big block, 454. Anyway, I just want to point out something that may have already been addressed, but I noticed the impala has a single chamber brake master cylinder. For a burnout car especially, I would recommend upgrading to a dual-chamber master cylinder (this is what modern cars have today) as when you lose a brake line or have a leak in the system, you lose the entire brakes which is obviously not good lol. You should be able to upgrade to a dual style master cylinder from a newer impala ('67 and up I believe) and it should bolt right in. Aftermarket companies also include this style master cylinder with a disc brake conversion kit, which I see you have already upgraded to discs so maybe you haven't installed the master cylinder yet. If not, I believe the master cylinder can be bought separately. Anyway, that's just my two cents. Best of luck with the build and the burnout competition!

This is Matt’s way of nicely saying not to expect another video for at least 3-5 days 😂

@freshfowler1398

2 жыл бұрын

💯😂😂🙈🙈

You should do a 4s lipo brushless swap into the rc low rider for mini burnouts.

Weld the gears to the pin, and the case. Fill the void and GOOD LUCK👍

Ls harness connection harnesses are the most user friendly harnesses and the customer service is amazing!!

The diff definitely needs more weld thats not gonna last

@Adiscretefirm

2 жыл бұрын

It only has to last a couple minutes for the burnout competition

@indianaslim4971

2 жыл бұрын

The only way it lasts is because of the 14 inch tires won't last very long.

@d.barclay1564

2 жыл бұрын

@@Adiscretefirm yeah cause a couple minute burnout is easy on a diff lmao

@Adiscretefirm

2 жыл бұрын

@@d.barclay1564 I guess in a couple weeks we both find out if it is the first point of failure or not

You will win the burnout content IF you incorporate the mini low rider (like roll it out first with a smoke ball in the trunk!)

Just started hello fresh a few weeks ago. Definitely worth it.

Awe Mark. Everytime I watch these I love that we get to see him in your outro. Great content I hope the Sod Pod flourishes.

I love how the idea of the lambo was whistlindiesels idea and everyone is determined not to let him win it😂😂

I love that the video starts with Matt planting grass in rocks🤣

I look forward for watching grass grow. 😎👍

That grass isn't like regular St Augustine it's a hybrid grass. In the Texas climate and the soil you planted it in, it will need to be watered just about every day. If you removed about a foot of that sand all the way around it and put better soil in its place, it will hold moisture longer and only need to be watered about every 3 days. lol.

I love how the clubhouse is starting to look like a trailer park

Matt, You know what would be cool? IF you did your burnout in your impala and then Mere surprises everyone again with doing HER burnout in the El Chromino all on her own. She has her car and you have yours.

@Diddy_Doodat

2 жыл бұрын

You probably won’t ever see her do that again lol

@andrewadams3927

2 жыл бұрын

She will have the ranchstang!

Setup a slow drip from your water tank on a timer powered by your solar bank. No need to remember to water.

Perfect! You are going to allow nutrients from a couple of LS Chevy blocks to Let Freedom Grow!

If you want to weld the diff, call jack stand Jimmy, he has done plenty of those 🤣

Everyone, 2x a week we need to remind Matt about the grass watering at a minimum!!!!

Cleetus did say in his video that it isn't actually Freedom Factory grass. It's just the same strain grass, and it's from the same supplier that he gets his.

@TheLawnCareNut your work has made it all the way to Texas.

Is VGG competing? Would love to see him win a Lambo 🤣

@NickCasciani

2 жыл бұрын

Yes

@indianaslim4971

2 жыл бұрын

Cleetus didn't fit, James barely fit, Derek probably won't fit, but I think Kevin Smith would fit just fine, plus he is a former winner.

I dunno, I kinda wanna see whistlindiesel win that Lambo. He'd take great care of it for sure 👌🏻

Time for an auto rain catching, grass watering system Matt, we know how much you love that stuff.

That's Scott's Pro Vista St Augustine grass. Allyn Hane laid that sod out at the Freedom Factory.

Hey didn't take his own grass, it's grass that's like the grass he has there

If WD wins the Lambo he'll probably run it over in the parking lot immediately.

Holley freaking killing it!

Love the sponsers at the start off every video

I used to have that EXACT patio furniture set - small world.

Nice to see you use the branding iron i send you :) Demolitia for life

It’s a good thing thanks Martha

Crushed granite good for dirt roads keeps dust down n compacts good.

Get Cleetus to play the War version of Low Rider when you run. CLASSIC!!

Don't knock it Matt, I'm not going to lie, I enjoyed watching the gardening!! 🙂

I have welded a few rear ends, problem is the gears are very hard and the welds can snap under pressure, (if gears were soft it would work better) anyway putting a spacer in there and welding to more surface area works better

I'm so happy that you don't own a demolition gardening channel lol, love your vids!! Keep up the awesome.

gravel will go a ways and you can do more landscaping - take out some trees and plant some trees - you have some serious dirt moving at house but that will get done and you will have grass - grade it out so you have a good space for sports - whiffleball, light pot smoking - you need the forage strips, ranges and native strips

U-line has a great selection of office furniture!

Hay Matt! Awesome lawn! We all want to help you keep that crop growing. To help us help you, please post daily so we can remind you. 😎

Looking forward you building the Impala

Cleetus showed off the Lambo. It's pretty sick. Really want you to have it Matt.

I like to weld spider gears then I'll actually take washers that fit in the grooves of the spider gears from one to another and well those in too

Fragola has a awesome Tight tolerance 90deg.

Put the disassembled diff through a parts cleaner, get it clean b4 you weld

Mere for Wife for the year award pls. Best support partner, super smart and strong role-model for the girls. I always enjoy the look of I don't think so Tim in her eyes When Matt asks her something.

I’ll be at Cleetus and Cars, hope to see you. Will be wearing Demolitia gear.

I love Mere laughing in the end of the outro 💖💖

You will have to use different wheels for burn out since you welded the diff one wheel will come off one side is left handed threads that will lose when burning out

I salute Burt the unsung hero of the DEMOLITIA and master fixer of the Demo fleet of mismatch trucks and cars.

when you but gravel down wet it it will keep the dust down but don't put to much water

We have alot of yards with St Augustin grass in AZ. It grows fine in direct light, just water it alot.

@indianaslim4971

2 жыл бұрын

It's everywhere in Dallas and suburbs.

I thought welding it like that was a good idea once too. Turned out the welding made the gears very brittle and they broke quickly. If I ever do it again I would weld a side gear all the way around to the carrier. And you'd have to use a stick welder and special gas since it is cast iron.

The relationship with mer was great in this vid