Trx250R Installing LSR Stem, Clamp, and GPI Radiator
Ойын-сауық
Let's install this Lonestar Racing plus 2 plus 1 steering stem and clamp on our Honda trx250r 330r. It's also time to replace this radiator and coolant lines and it's a good thing we did!
garagemc549@gmail.com
#garagemcmatt #honda #trx #250r #250 #330r #330 #bikelife #lsr #lonestarracing #gpi #atv #quad #atvbuild #quadbuild
Пікірлер: 65
Just recently started watching your channel. Enjoying your videos and really appreciate all you are doing. Keep it up, my friend.
@garagemcmatt
9 ай бұрын
Thanks bro. Welcome
I do that with the Air filter, I have like 5 of them. Prodesign
@garagemcmatt
10 ай бұрын
It's just easier to swap and clean later
Bro! Just watched the whole video ❤ call it the black window R lol, and thanks, man
@garagemcmatt
10 ай бұрын
That's the plan bro. Hopefully I don't get bit by either one
@justincarlfilms
10 ай бұрын
Awesome video, man, lol, I watched it while uploading mine 😄
@garagemcmatt
10 ай бұрын
@@justincarlfilms nice. Thanks bro
You should have had two spacers that went in the bottom
@garagemcmatt
20 күн бұрын
On what part?
@garagemcmatt
20 күн бұрын
If your talking about the ones that go in the seals they are there in the video
Shes getting there man appreciate your time forsure an becareful messing with those spiders my brother almost got bit by one an about shit a chicken an me too lol 💯
@garagemcmatt
9 ай бұрын
I'm gunna let her go out in the woods. And yeah the R is gunna be sweet
@jeremyott9169
9 ай бұрын
@@garagemcmatt hell yeah i bet she will be man
That much oil could be right crank seal failing n would also cause rougher starts maybe something to look at
@garagemcmatt
9 ай бұрын
It was hard to start from the kill switch it was all oxidized and corroded. I'm working on it now and inspecting the seals
I'll give u a good Lsr story 3mths ago brand new +1 stem 300$ 5min into its first ride hit a small bump and busted the welds right off the flag look down at the front wheels cause i couldnt move the quad and they was both pointing 2 different directions
@garagemcmatt
10 ай бұрын
Sweet. That's fu*kin awesome. Let me guess they said it was your fault
@ALDA2479
10 ай бұрын
@garagemcmatt Yup they got me dealing with a guy by the name Davey Mueller 3mnths later I still have the broken worthless stem and I had take another 300$ and by a Roll Designs cause obviously I needed a new stem
@garagemcmatt
10 ай бұрын
@@ALDA2479 typical stuff from what I've heard from other people
Should clean the pipe and the silencer needs to be repacked.
@garagemcmatt
10 ай бұрын
Definitely gunna clean the pipe out. I don't think it needs packing yet but gunna do it anyway
Tractor Supply has some nice hose clamps or Farn & Fleet or Barn depending on what u got local
@garagemcmatt
10 ай бұрын
I have tsc I'll look next time I go by there. Thanks
I say put it on both sides of the rad also one somewhere on the back of the 250r
@garagemcmatt
10 ай бұрын
I'm gunna put one on the back somewhere
@feracopictures9322
10 ай бұрын
Nice! The middle looks nice on the rad. On the back under the fender on each side, I don’t know prob get messed up from stones and what not hitting the logo. Are you putting on the 250r logos on the rear fender? I’m trying to picture where on the back the other logo gonna go.
@garagemcmatt
10 ай бұрын
@feracopictures9322 yeah factory style graphics but in black and red.
@feracopictures9322
10 ай бұрын
@@garagemcmatt you going to corporate the black widow logo on the 250r graphics?
@garagemcmatt
10 ай бұрын
@@feracopictures9322 no just keeping it kind of hidden
We appreciate your videos it takes a lot of time. I like the raw footage like we are in the garage with you, lol, but I get my rad clamps from jegs or summit
@garagemcmatt
10 ай бұрын
Ok cool I'll check them out. Thanks bro
Where'd you get your Stem bearing kit? Would like to source a kit that has the bushing as well. Have some vertical play in my 250R steering stem, probably time to do the whole lower bearing setup. Having trouble finding the kit with everything.
@garagemcmatt
9 күн бұрын
Ebay. I think I had to buy the upper bushing separate tho
I run crf skids they are a great company. It's like. 5 thick, you should see the scratches in it.
@garagemcmatt
10 ай бұрын
I'm sure
Awesome bro!
@garagemcmatt
10 ай бұрын
Got your shout out in there
Clear Tupperware that's a odd name
@garagemcmatt
10 ай бұрын
Best I could come up with lol
@johnbruzzi4381
10 ай бұрын
@@garagemcmatt no I'm kidding I like it
@garagemcmatt
10 ай бұрын
@@johnbruzzi4381 I know. I'm messing with u
Wait to you try to put your tie rod ends in your steering stem from LSR. I put the ones you suggested for my 450r on my new plus 2 tie rods. The holes in the stem are oversized. So they are sloppy. Smh
@garagemcmatt
10 ай бұрын
Hmm. Ok I'll see tomorrow when I throw those on
@johnbruzzi4381
10 ай бұрын
I have a lar stem on my trx450 are you using OEM tir rod ends? I mean the holes may be a sliver bigger than houser but once they are tightened up no way are they sloppy. Something is not right on your quad my man
@garagemcmatt
10 ай бұрын
@johnbruzzi4381 it's possible. Maybe got a bad stem or even a bad set of ends but who knows. I talk to alot of people that get defective stuff
@dannym3078
9 ай бұрын
I’ve tried 3 different tie rod ends and they are all sloppy. I bought the BFE ones he suggested. And a junk Chinese set and stock. They all are just a little loose in the hole. In tightened them down and they don’t move. But the just don’t fit like they do in the knuckle. I just figured once you bottomed them out they be tight knowing the stem isn’t tapered.
@garagemcmatt
9 ай бұрын
@@dannym3078 I just went to try mine in that stem. Wait till u see this in the next video
How do them Gpi rads compare to like a Mishimoto i always see them on ebay for like 100$ less then a Mishimoto but never really sure how they compare
@garagemcmatt
10 ай бұрын
I've run a bunch of them and never had an issue
@ALDA2479
10 ай бұрын
@@garagemcmattDo u notice a difference
@garagemcmatt
10 ай бұрын
@@ALDA2479 just the price and the swag points
@johnbruzzi4381
10 ай бұрын
@@garagemcmatt are they oversized? The mishomoto are oversized that's what I run, they are made in USA I'm pretty sure
@garagemcmatt
10 ай бұрын
@@johnbruzzi4381 yes they are thicker