TRUMPF laser cutting: Nanojoints
Ғылым және технология
Further information:
www.trumpf.com/en_INT/product...
Nanojoints allow you to nest more closely - you use your resources more efficiently and benefit from higher productivity.
In contrast to microjoints, nanojoints only fix the component to the scrap skeleton via a small stop point at the lower end of the kerf. This leads to a process reliable sheet processing, since tilting of the components is prevented. The damage to contours at the lower end of the kerf is minimal and you can release your components from the scrap skeleton more easily
Пікірлер: 6
IMPRESSIVE function that allows optimal nestings and a large reduction of wastage; common cut; simple separation of thick sheet; and no marking on the "good" face of parts. Congrats, TRUMPF!
Microjont тоже можно настроить как наноперемычки. Удивительно что операторы не смогли
What is the difference between a nanjoint and a small microjoint ?... I see that this is a feature only available in boost version 14+, Can and machine take advantage of the nano joint feature if I the sheet program is generated with boost, for example a 13 year old 5030 L16? does this feature require tech table or process rule updates?
@RozrewolwerowanyRewo
2 жыл бұрын
Let me know if you get a respond :)
@MarkPettem
2 жыл бұрын
The only "retrofittable" machines are L88, L81, L94, L95, L68 and L76, to the best of my knowledge. There is an HMI upgrade in addition to the minimal release of Boost.
@MarkPettem
2 жыл бұрын
A microjoint will typically span the entire part width, requiring greater separation effort and some reworking. It also tends to mark the "good" surface of the part. Nanjoints occupy a minimum of the part, do not mark the surface and allow for easy-peasy separation. A world of difference.