Truck Pull #2 Jackson Co Jr Fair July 30, 2022
Автокөліктер мен көлік құралдары
We always enjoy our two days of shooting at Jackson County Junior Fair in Cottageville, WV at the end of every July. This year definitely didn't disappoint. The Friday night Mud Bog had quite a few entries from daily drivers to the high speed rails and trucks. The pit was challenging and kept the drivers busy till three in the morning. Saturday's Truck Pull was just as fun and also lasted late into the night. If you've never been to the JCJF we highly recommend it.
Пікірлер: 272
I love seeing these old trucks put in some work. I love old trucks!
@PaladinThomas
Жыл бұрын
Old trucks are the only trucks I trust
1:48 Goodbye, head gasket. Literally gave it its all for that run.
@Mikefngarage
Жыл бұрын
YUP....then the Chevy outpulled it a few trucks later ready for another run.
Keep posting these videos. I like seeing the old irons draggin' sled!
That death trap with the wibbly wobbly wheels was fkn hilarious LOL
@gumballer133
Жыл бұрын
Yea, I surprised to see Death Wobble at 15mph. That was a first for me
@ingodwetrust1136
Жыл бұрын
@@gumballer133 It didn't have anything to do with speed in this case, faulty suspension couldn't sustain the torque
@gumballer133
Жыл бұрын
@@ingodwetrust1136 Well yea, I know it. Looked awful unusual though!
@ericjohnson8482
Жыл бұрын
@@ingodwetrust1136 It's not faulty suspension, it's how Ford's TTB is, garbage.
@ingodwetrust1136
Жыл бұрын
@@ericjohnson8482 yeah I'm not a fan of the TTB I swapped mine for a Dana 60 but my old ttb never did this under high torque and plus there's other trucks in this video with ttb and they're not doing the same thing, I have a feeling you just wanna be a manchild fanboy and brand bash if you wanna go that route ifs chevys are king of collapsing thier tie rods
Always fun to see the daily drivers out pulling the sled. Last 2 times I did that with my old 1972 F250 I took first over the local daily drivers. I run it as I drive it daily. Some if the boys tried to make some special mods just for the pull and still lost. That’s why I have not done it in a few years no real local compilation
@davidbrennan5
2 жыл бұрын
The Ford at 3:57 and the Chevy at the end were great.
@firerescue2553
2 жыл бұрын
ohhhh goood for you.
@carmichaelmoritz8662
Жыл бұрын
And you guys accomplish so much by doing that 🤣😂
@reidthompson8979
Жыл бұрын
@@carmichaelmoritz8662 they have fun. Try doing it sometime.
@carmichaelmoritz8662
Жыл бұрын
@@reidthompson8979 I wasted so much money having so-called fun. There's better ways to have fun without wasting.
The white f250 with the headlights xd out and no mirrors is me lol
@thunderstruckdodge
Жыл бұрын
Sounds good!
Bullnose Ford best looking truck out there 💪🇺🇲
@BruceMyersLBZ
Жыл бұрын
Nope, OBS then 68-72 chevy
@FredTheTruck
Жыл бұрын
@@BruceMyersLBZ no Bricknose ford
I was there and those boys gave it hell a lot of fun👍🏻
I like how that Ford put an IFS Chevy mask on....
@stanleykendziorski7964
Жыл бұрын
The ole twin traction beam didn't like that.... JUNK!!!!!
@dodgeguyz
Жыл бұрын
@@stanleykendziorski7964 The TTB is actually pretty strong. I’m surprised it did that. Although it was an F150, so it was beyond its capabilities!
@stanleykendziorski7964
Жыл бұрын
@@dodgeguyz the half ton ttb is basically a dana 44.. weak points besides a regular d44 is the tie rods as you saw, and the pivot like on all ttbs... the 3/4 tons, and one ton 4x4s 80-85 got the dana 50 ttb, which is a bastardized dana 60 and a dana 44.. essentially a dana 60 housing with a 44 ring and pinion.. Best option if you have a half ton, un bolt that ttb, roll in an 05+ coil front, very little work to use them.. easiest for the 3/4 tons or early one tons is find either a kingpin or ball joint dana 60, both are awesome, and they 99.9% bolt in
@DDFJ1230
Жыл бұрын
@@stanleykendziorski7964 the TTB had nothing to do with why it failed. That was issues due to tie rods bending from the improper angle they were at.
@stanleykendziorski7964
Жыл бұрын
@@DDFJ1230 and why were they at the improper angle?
People are brave to put old trucks to the test in 2022 with all the parts shortages going on. So many companies feeling the strain are not making old truck parts anymore. This was fun to watch and I’d like to compete in one someday!
@bobmorane2082
Жыл бұрын
Scrap yard?
@who_cares848
Жыл бұрын
Theres still a ton of the 80s shit to pick parts off of
Not 1 single brand new mall crawler in the bunch...nice!!
Love watching these old gas power stockers pull. You know trucks probably started just like the tractors some farmers argued about who's truck was stronger. And go back passed the mid 90s and most 3/4 and 1tons were gas power alot were big blocks. Diesel was out of corse but not alot bought them. They were no where close to modern diesel pickups.
sooo many clean bullnose fords!
every truck screamin its heads of. That one red Truck just leisurely trotting along the track XD
Big thumbs up from this Canadian!
I believe that's the first time I ever saw a frontend do that on a Ford. Very common on ifs Chevy
@paulhare662
Жыл бұрын
Ford death wobble, very common.
@ericjohnson8482
Жыл бұрын
You must not seen many Ford's then. It's common on everything with IFS.
@sugartreefordman7293
Жыл бұрын
@@ericjohnson8482 I’ve seen literally hundreds of truck pulls and to my knowledge this is the first ford I’ve seen do this while there’s whole compilations of chevys. I’ve owned many many ford trucks by the way. Ford trucks from those years didn’t have ifs anyway!
@ericjohnson8482
Жыл бұрын
@@sugartreefordman7293 TTB was Ford's answer to IFS. It was a terrible design and you've never seen many then if you've never seen it before.
@sugartreefordman7293
Жыл бұрын
@@ericjohnson8482 I guess you can call a man a liar if it makes you feel better but yes I’ve seen hundreds pull and owned dozens of fords
Love the guy who must have gotten daddys pickup and took it out to the pulls. Like a brand new Ford and still pulled 260....impressive.
3rd pickup, "look at me! I'm a chevy!"
Awesome video good job
Mis respetos para las camionetas Ford, son bien aguantadoras, y tienen buen motor y ya modificadolas del motor corren chido, aúnque creo hay veo que tiene tracción 4x4 pero se la rifa la neta
Out of curiosity, what was the weight limit in this class?
That last chevy was nice! I like the mid 70s multi colored one too!
@Mikefngarage
Жыл бұрын
@Hmm yea i think so There were several Chevys that outpulled the best fords. Wasnt even a contest. Near none of the Chevys broke 2 fords Broke. The Chevys were ready for another pull.
Good ole ifs. Wonder if the ball joints/king pins (as they called them for a few years) on that ttb were worn out
@gagedelong4834
Жыл бұрын
No he said that the whole tie rod bent
@JohnnyAnderson1
Жыл бұрын
it was lifted and had stock crappy steering
@LuisMedina-rg6tt
Жыл бұрын
Nope just to much American power going to the wheels
@darryladams519
Жыл бұрын
@@gagedelong4834 Didn't hear that part.
@darryladams519
Жыл бұрын
@@LuisMedina-rg6tt not from a Fix Or Repair Daily
I was there having a hell of a good time. I work at the fair every year to.
This is what gas truck classes used to be around here in Indiana. Now nobody pulls street stuff gas or diesel. Work stock classes used to be 20 plus trucks now your lucky to get 3
@Beandiptheredneck
Жыл бұрын
And those are the best! The biggest show at our local pulls every year is the stock trucks
@kramnull8962
Жыл бұрын
It is like this, there is such a supply issue with auto parts in general. Not to mention these parts aren't made here in America anymore since the older companies have shut their doors here. Then you have to rely on Chinese reliability. I bet they could mess up a chinesium sled weight...
Looks like....lol ...the newer trucks just give up. Those early 80s trucks are still pulling their weight. 👍 No tundra's? LOL!!!
Ahh the tractor pull...Ive always said this is pretty much a perfect .metaphor of most relationships...starts out hot n heavy..runs out of steam at the end.
Anyone have an idea on the wheel and tire setup on the 2nd bullnose
Are those completely stock engines with stock carburetors on those trucks?
Pull truck #3 reminded me of a girl I dated in high school....She danced a mean lick but struggled to keep her knees together...😄🤣😂
Valve float makes great rev limiter.
@hillbillymechanics1728
Жыл бұрын
Yes
@Mikefngarage
Жыл бұрын
Yup stock springs and adjust them at 1/4 turn. Limits out just where you need it. ha ha. Been doing that on my old Chevy's for years.
Why does the front wheels wobble like on the blue Ford?? I dont really understand what happend and why
That TTB though!!!!
@7.3sareslow34
Жыл бұрын
A great example of why they're garbage, looking to swap mine for a solid axle soon
Can someone explain why some drivers are pulling at full throttle while other aren't?
Hard to beat those Chevrolets!
What broke on the Dana 50? Because it looks like it folded in on itself.
@jdubskiwright2380
Жыл бұрын
I think he broke his tie rods maybe.. he still kept it straight and gave it hell..
@FollowingYah
Жыл бұрын
steering related not diff
@ahorsenamedoaks1377
Жыл бұрын
@@jdubskiwright2380 My 97 HD has a larger tie rod, on the one side. Wonder if they did it for that reason. Can't remember how they were on my 89.
@jdubskiwright2380
Жыл бұрын
@@ahorsenamedoaks1377 everything seemed to still be spinning just looked like the tires lost there way kinda lol.
@paulkimber6028
Жыл бұрын
The guy lifted his truck but didn't use a dropped pitman arm, putting the tie rod and drag link on a bad angle and forward torque bent the shit out of them. It was most likely a little squirrely on the street even before that. Lift it the right way or leave it the fuck alone.
Ford trucks can take a beating better than the others
@Mikefngarage
Жыл бұрын
that is why the Chevys all didnt break down and outpulled the Fords. Did you stop watching the video after the first minute? it was all about chevy 330 plus fords top was like 329 and he blew the hell out of the head gasket. Chevy was ready for another run.
@sherryjohnson1206
Жыл бұрын
@@Mikefngarage you don’t build the Engine right they will all blow
Nice 👌
It’s sad that a 1920 steam tractor with metal wheels would pull that all the way to the end. As long as time wasn’t a factor it would always win.
@aussiek2000
Жыл бұрын
and how much does it weigh compared to a truck?
@Imwright720
Жыл бұрын
@@KS-xo3oh technique;ly they are called tractor pulls and I didn’t know they were daily drivers. Who says you can’t drive on daily. kzread.info/dash/bejne/jJyKptOLnr3ekdI.html
What kind of front suspension setup does the #3 Ford Truck have? Obviously tires wobble quite a bit. I am just wondering if it was meant to do that way, for some strange reason like perhaps for extra grip?
@TheNyarcangel
Жыл бұрын
That's the Ford Death Wobble
@ericjohnson8482
Жыл бұрын
@@TheNyarcangel No it's not, it's Ford's Twin Traction I-Beam, torque is what does it, speed has nothing to do with it.
@ingodwetrust1136
Жыл бұрын
@@ericjohnson8482 yeah I'm not a fan of the TTB I swapped mine for a Dana 60 but my old ttb never did this under high torque and plus there's other trucks in this video with ttb and they're not doing the same thing, I have a feeling you just wanna be a manchild fanboy and brand bash if you wanna go that route ifs chevys are king of collapsing thier tie rods
Ole twin i beams puttin in work
Nice pick truck
Saludos desde tiltil chile
2:48 that guy didn't wanna get his truck dirty. Lol
Why cant they tell you what weight they maxed out at?
Ohhh tooee, where did it goo.
am I tripping or was the 1st one an f150?
Long life to bullnose trucks
Hi my name is Chris I like your video
Ford trucks #1
Como funciona isso afinal? Esse peso?
Seems like a competition between Chevys and the fords were there to fill in the extra spots
Wonder what the 300i6 with a granny 4spd would pull in that
@adamswiger9499
Жыл бұрын
Not good not enough wheel speed
@SquirminHermanthe1eyedGerman
Жыл бұрын
I used to have an '83 with the 300 I6 & it wasnt anything to brag about, barely could get out of its own way
@jakefisher7280
Жыл бұрын
@@SquirminHermanthe1eyedGerman yeah but this one I got I like the idea I can get out of it and it crawls itself up a hill with a load on the back mines a brick nose just like that one
@SquirminHermanthe1eyedGerman
Жыл бұрын
@@jakefisher7280 Thats cool! I will stick to all my old Dodge trucks & I have one with a 4sp with a granny gear that crawls over & through just about anything
@paulkimber6028
Жыл бұрын
There's actually quite a bit of shit you can do to the 300. I had a '76 F150 and it had an Offenhauser manifold and 4bbl, upgraded ignition, hogged out exhaust manifold for bigger exhaust system. It kept up with all my buddies V8s. Even with 33" tires. Power Nation did a sick build on one, check it out.
The dodge tho 🤣🤣🤣🤣🤣🤣😆😆😆😆😆😆😂😂😂😂😂😂😂😂😂😅😅😅😅😅😅😅🤣🤣🤣🤣🤣🤣🤣🤣👍
Интересно Нива или УАЗик с место хоть бы тронулись 🤔
@ramonganzales5245
Жыл бұрын
😂😂
@sachaobidennov9065
Жыл бұрын
Тронутся на пониженной
Surprised that triton held it's spark plugs in
What is up with the 3rd ford's from end?
@rrknl5187
Жыл бұрын
It's transgender and wanted to be a Chevy...........
@UserName-ln5ol
Жыл бұрын
@@rrknl5187 yea Chevy never did produce a sturdy front end on a 1500. It's just a lost Ford.
@SquirminHermanthe1eyedGerman
Жыл бұрын
its a Ford
@SquirminHermanthe1eyedGerman
Жыл бұрын
@@rrknl5187 haha girly fan boys love their fords
The Chevy at 4:56 is what I think of when I think Chevy.
just me or is the 4wd not working properly on the old Ford trucks?
@Zach-ju5vi
Жыл бұрын
Factory open differentials in the front so they turn in 4x4. Looked like many of the Chevy guys locked or welded their front diffs.
@RBFR01
Жыл бұрын
@@Zach-ju5vi smart thing to do
Nice to see some square body gassers. Late model diesel pickups have ruined truck pulling. They all look the same with the same rims and tires, same setup. No imagination or creativity. I'll take old square body gassers any day.
351 Windsor is probably the best production v8 ever made
@87GTdude
Жыл бұрын
right next to the 460 BBF!!
@gagedelong4834
Жыл бұрын
Yeah maybe but they are both right after the 350 and 454 🇺🇸.
@thealgorithmisbroken
Жыл бұрын
351 Cleveland was better imo.
@CoyoteFTW
Жыл бұрын
@@gagedelong4834Chevy sucks always been behind Ford never understood the blind fanboyism from government motors crowd they are and will forever be 2nd to Ford
🎉 wooooooo
Who won
anyone else notice all the newer ford diesels but 1 driving like they scared something about to break.
1:10 omg stop 😵💫
The last one looks like my truck that was stolen year's ago
I have tahoo can i particept??
Ford models?
NlSSAN VTC 💪🏻
@user-nu4tn7lu7c
Жыл бұрын
This is American vehicles They don't have Japanese vehicles 😂
Those old ford vs old Chevy just ain’t fair lol
@jarvislarson6864
Жыл бұрын
No doubt poor handicapped fords
That is what you get for failing to do a pre trip inspection
But but gm ifs. Nothing compares to that trash twin traction beam🤣🤣🤣
3:21....FINALLY!!! .....A Dodge....
That's the most american thing I've seen today
' american M1A tank is easily pull to the end finish line and win
Don't understand why some of the driver's are pulling in 4hi instead of 4low🤷🏿♂️
@KevinBenecke
Жыл бұрын
Or letting a little air out of the tires for extra traction.
@Beandiptheredneck
Жыл бұрын
I had a friend that did that once, he'd done a bunch of pulls with his hopped up cummins and was convinced it was tough enough with a 100% stock transmission, he got about 75 feet before he had 3 neutrals and reverse was going forwards 😅
@David-yy7lb
Жыл бұрын
@@BeandiptheredneckOMG 🤦🏿♂️
@Beandiptheredneck
Жыл бұрын
@@David-yy7lb it was pretty funny for all of us that told him not to, he's never heard the end of it either
@Beandiptheredneck
Жыл бұрын
@@KevinBenecke probably better to let the wheels start spinning instead so you don't blow a shaft or u joint
I thought there was a shortage on the newer truck stuff… we need to save the older trucks.instead of scrapping them
Chevy ❤
My buds 390 would hate him if he decided to enter one these pull events
1:13 shiver me timbers
That Ford identified as a chevy
Fix on race day
Fords and their scissor suspension front wheels never flat
Alot of 460s
Reckon Jackson county is bull nose ford rich
@jdubskiwright2380
Жыл бұрын
Hell yeah..obs fords are the best..people that have never owned or worked a 302 or 351 really don't know how capable they are.. and don't believe the power ratings ford puts out there notorious for putting out lower figures then what there motors actually produce.. hell I've out towed many 360 dodge magnums and Chevy 350s with a little 5.0 302 in an f150.. and there some hard to kill engines..keep oil and a good tune up and they will run forever..
AMERICA!
Bien
В чем смысл?
+1
At 1:34 I know what the problem is it don't got gas in it
Ecology class euro 6!!
В чем смысл этих соревнований?
@sachaobidennov9065
Жыл бұрын
Мастерство водителей смотрят.
@user-py5wk2ht3k
Жыл бұрын
@@sachaobidennov9065 мастерство протащить телегу?или что,как...правда не понятно.
Ничего не понял
Why
Gas money
i thought this was a commercial for FORD until. the 2 out of 3 CHEVYS outpulled most of the Fords. IMO chevy would be the easiest truck to build. parts are more interchangeable and IMO more available to make something for a strong contender.
Ha it's flexing
Those old box body Chevys were putting those Fords to shame! That one F150 had the famous Ford death wobble! Diggin that old Dodge too ✌💖☮
@Monster404ftp
Жыл бұрын
The white bullnose with the raked stance and especially that blue dentside held their own against those squarebody Chevy's pretty good. The rest of the Fords got stomped though lol
@Monster404ftp
Жыл бұрын
Also that bricknose suffered from what a lot of ifs Chevy's suffer from..... Can't have that issue if you grease the steering zerks.
@SquirminHermanthe1eyedGerman
Жыл бұрын
@@Monster404ftp Those fords really really tried to keep up
@Monster404ftp
Жыл бұрын
They did. However, Seeing those old Chev squares makes me miss Grandpa's 74 C10. 350sbc, 4 on the floor with Granny low. That truck would pull a heavy camper like nothing was behind it. It was overall a fun rig.
@SquirminHermanthe1eyedGerman
Жыл бұрын
@@Monster404ftp Right on, great memory & I hope you went camping in it with him as I miss my grandpa! My first box body was a '76 350 4bbl auto that I got at 15 in 1981 for $1200! I also had an '83, '85, '87 & for good measure a 454SS throughout the late '80s & '90s
Chevs just layin the beats to dodge and ferd 😂
@Andrew_460
Жыл бұрын
Ya ok bud
@CoyoteFTW
Жыл бұрын
What video did you watch
4:50 Caraí véi esses Chevrolet são bem mais forte e resistentes