Thank you so much man. Bought a used ruck and nothing was blocked off. No breather. Just vaccum hoses everywhere. Thos helped so much! Ill ve orderint parts from you in the future.

Hey TRS you need to hire this spokesman he's the best!!! Great video

@Theruckshop

3 жыл бұрын

we will look into that.

@williamloulou6639

2 жыл бұрын

@@Theruckshop is it working whit a 2022 honda ruckus?

If you replace the factory CVT with one of those plates that shows everything can you still use that bracket?

JIS (Japanese industrial Standard) screwdriver is the ideal screwdriver to use. Unlike Phillips head it is designed to work with all of the quad head screws on a Honda. It won’t strip a screw like a Phillips head does. The carb screws strip frequently when people use a Phillips, particularly with lower end Phillips screw drivers.

@Theruckshop

3 жыл бұрын

we agree but found one that works with us as you saw in the video. thank you

@Ethan.s..

3 жыл бұрын

@@Theruckshop indeed, certain higher end Phillips head screwdrivers work well on these screws. Snap on brand driver for example works well.

@carlo1132

2 жыл бұрын

@@Theruckshop I am a customer of TRS(tons of their parts on my ruckus), they make some great stuff. What screw driver is this? I have had problems with the carb screws, stripped, injured my thumb, major pain. Also these Air Delete Kits with the Automotive hoses always seem to either interfere with the suspension or tire, esp when you have an aftermarket cvt cover then the metal bracket won't fit right, compressing the hose or interfering with the tire when you delete the fenders. I am back to running a cone filter right off the carb with the trs cvt cover I just couldn't get the hose right and it was tweaking the carb sideways.

@Theruckshop

2 жыл бұрын

@@carlo1132 are you referring to the intake hose bracket that holds the hose to the cvt? if so that is bendable so you are supposed to adjust it for a smooth fit to the cvt. the filter directly to the carb will make that scooter run very lean.

Finally ordered one. Anybody know what size tubing I would need for tubes that need to be cut? I'd rather keep the airbox totally intact and ready to get swapped back in if needed. Basically just looking at what size inner diameter tubing I'd need to get to run those atmospheric hoses.

Does this improve performance? A little more speed?

Hey i know its an old video but when doing the airbox kit WITH stock exhaust is it okay/best to not jet the carb until after you get the upgraded exhaust? Also do you bot need to oio the filter?

Will this work on a 2002 Metropolitan 2?

Can i put this my metropolitan scooter 49cc 2019?

Is it a good idea to remove/block the par valve? Please correct me if wrong, but I believe its purpose is to allow gas that blows by the O ring into the crank case to evaporate, preventing oil dilution and maybe even release crank case pressure.

@Theruckshop

2 жыл бұрын

Yea we have been blocking them off for 14 years now without issue. Some of these engines have 15k miles on them and still running fine

Ok gripes are 1. No gasket for the par blocking plate. 2. Not enough hose clamps if you do the filter bracket.

@Theruckshop

Жыл бұрын

It comes with two hose clamps which is all you need, the par valve doesn’t need a gasket. Haven’t ran one for 10 years plus of blocking it off.

@chuckley54494

Жыл бұрын

@@Theruckshop our kit came with one clamp for the air box delete kit and no clamps for bracket kit. had to pick up a clamp at lowes to finish, with no gaskjet wouldnt you get leakage ?

So what about the hose for the clean air intake on the PCV solenoid there. I noticed you just left it disconnected and it's just sucking atmosphere in and dumping dirty air out to atmosphere. If I still have the solenoid connected won't that affect performance? Should I get a t bracket and use some of the hoses that I cut to install the breather filter so both clean, filtered air is going to both the PCV and the spot on the carb where you installed the breather filter?

@Theruckshop

Жыл бұрын

You leave that open. It’s been left open like that since 2006. If you want to put a filter you can but it’s not needed.

Do you use gasket maker when you put on the aftermarket par valve plate?

@Theruckshop

Жыл бұрын

You do not

+good video, but what do you gain by doing this?

@Theruckshop

2 жыл бұрын

pick up, mph

What is the difference between the type 2 and the type one is it for different performance

@Theruckshop

Жыл бұрын

The filter is the only difference. Type 2 can handle all weather conditions. Type 1 cannot.

Can you bypass those coolant hoses to the carb?

@Theruckshop

Жыл бұрын

Yes you need just a double ended brass fitting. So both hoses can link together.

Do you have to re jet the carb? If you don’t what’s the difference?

@Theruckshop

2 жыл бұрын

Yes. If you don’t it will run lean and blow the motor

This will work on a 2003-5 ruckus?

@Theruckshop

2 жыл бұрын

All ruckus models

Bobby, does this work for the new Mets that are fuel injected?

@Theruckshop

2 жыл бұрын

this does not work for fi models unfortunately. sorry

@shanebrock3621

2 жыл бұрын

@@Theruckshop is there anything for the fi models? Can’t seem to find much for performance on the new Mets. Thanks!

@Theruckshop

2 жыл бұрын

@@shanebrock3621 no there is not much at all for your model unfortunately.

@AcidAngel7

3 ай бұрын

I ordered this kit for my 02 met and didnt know it was FI..stupid me, I know. But I still installed the hose and filter with no problems. It made a nice difference too.

Can you run the stock exhaust with this or will it be too rich? Thanks

@Theruckshop

Жыл бұрын

You can. Just run stock idle jet and then only use the 85 main jet provided

@KevinSmith-ol4ui

Жыл бұрын

@@Theruckshop when running stock exhaust and keeping stock idle jet is it wise to install the shim for the needle? Will it have a negative affect being installed without testing for bogging issues? Thanks for any info, deleting airbox tomorrow when my kit arrives!

@hoeonirocs

Жыл бұрын

@theruckshop ☝🏽

i just put one on my ruckus and i didn't get much improvement its still the same speed but the only thing is that its louder, i heard a aftermarket exhaust would help gain power with the airbox delete. is that true what do i need to do to make it work

@MisterBrightsiide

2 жыл бұрын

Did you rejet your carburator, and do you have a tachometer?

@nikitak6101

2 жыл бұрын

@@MisterBrightsiide yes i rejetted and shimed and no tachometer

@Theruckshop

2 жыл бұрын

This is correct. You are allowing more air and fuel but now bottlenecking it at the exhaust so it’s still very restrictive. Also if you put both the jets in for the airbox it will be too rich for a stock exhaust.

@nikitak6101

2 жыл бұрын

@@Theruckshop so what do i need

@a.flores3623

2 жыл бұрын

@@nikitak6101 you need exhaust

@theruckshop is it working whit a 2022 honda ruckus?

@Theruckshop

2 жыл бұрын

All years of the ruckus

@basoncivicsi

2 жыл бұрын

@@Theruckshop Wonderful news. Just bought a 22 Ruckus 2 weeks ago. New customer on the way. Thanks TRS!

Where are the links to these parts

@Theruckshop

2 жыл бұрын

In the video description of all of our install videos we have the link for the parts.

these companies think they are better than honda engineers. good luck with that in the long run

@Theruckshop

14 сағат бұрын

26,000 miles and running with this intake on one of our local bikes that is a daily driver and has this intake on it for 6 years now. Appreciate the comment!!!!