Troubleshooting TIP-ON BLUMOTION for MOVENTO
Тәжірибелік нұсқаулар және стиль
In this video, we’ll troubleshoot some common issues that could cause your TIP-ON BLUMOTION for MOVENTO drawer slides to not work properly.
If the drawer won’t open, check for bumpers that could prevent the push-to-open mechanism from activating. If the drawer still won’t open, make sure you have the proper front gap set. Our front gap template makes this a breeze.
If the drawer won’t open when you push the left or right side of the drawer front, make sure you have a synchronization rod connecting the left and right unit together, so they activate and operate at the same time.
If the drawer doesn’t open as far as it should, make sure you have the correct TIP-ON BLUMOTION unit for your application’s weight.
If the drawer makes a loud click when opening, check the adjustments on the MOVENTO runners, make sure the runners are level inside the cabinet, and make sure the drawer box and cabinet are square.
0:00 Intro
0:12 Remove Bumpers
0:34 Set Front Gap
1:51 Ensure Synchronization Rod is Installed
2:50 Ensure you have the correct TIP-ON BLUMOTION Unit
3:13 Check Adjustments on Drawer Runners
3:49 Ensure Drawer Runners are Level
4:08 Ensure Drawer Box and Cabinet are Square
4:30 Outro
For more Blum MOVENTO videos, check out this playlist:
kzread.info/head/PL_1bO649BJqgcYWzKzuurkQwgC5dqEU5f
Пікірлер: 27
Hi. I already do the installation but the right side runner isn't working soft close. Was ok but once i fixed the locking sistem,the soft close stop
❤
What to do if it dont close/ luck?
One of my drawers always sounds like something is rubbing, like if a piece of paper was crumpled up in the back and getting ran over every time you open the drawer. I removed the drawer box and noticed that one runner slides much more smoothly than the other. The synchronization rod has also broken on one side because the drawer slides were not moving together since one is smooth and the other is a bit forced. What can I do?
@BlumInc
Жыл бұрын
Hey there - You will need to replace the broken synchronization rod. The part for this is: T60L1118W. If the sync rod is not broken, then you will need to check the synchronization adapters, part number: T60.000D
Is there anyway to disable the push open mechanism? I want to disable during parties to keep people from accidentally opening the drawers when leaning on my cabinets.
@BlumInc
7 ай бұрын
Unfortunately with the TIP-ON BLUMOTION units, there is no way to temporarily disable the feature.
Can you show how to adjust it if it isn't closing properly please?
@BlumInc
Жыл бұрын
Please email us at marketinginfo.us@blum.com with a little more detail. If the runner setback is correct and the TIP-ON BLUMOTION units are properly set using the front gap template, then there shouldn’t be a closing or opening issue.
Some of our drawers with tip-on blumotion do do not close properly or open again when closing them. This is very annoying and even after trying several things as shown on the web, no success... We have the L5 black (on 12 drawers)
@BlumInc
9 ай бұрын
Hey there - the L5 is for heavy duty drawers, so it will work better for drawers that have a good bit of weight in them. There are other unit options available for lighter drawers.
I have no trouble with push to open, but the soft close requires me to almost throw the drawer. Anything less and the drawer just bounces back. I have two that behave the same way.
@BlumInc
10 ай бұрын
Hey there - It does require a fluid push to overcome the spring that opens the drawer, but it sounds like you're having to use abnormal force. There are different units available for different weights of drawers. For example, heavier drawers require a stronger unit. It sounds like you may have the wrong unit on your drawer. Please take some photos of your drawer and the hardware and email them to us at marketinginfo.us@blum.com.
@lhartwig2354
3 ай бұрын
What is a sub front thickness mean? My drawer front is 3/4 inch? I have one drawer that won’t active I have sync rods on all drawers not all open in no matter where I tap. This seems more like rocket science than the average person can handle.
Is it possible to use just one tip on modules on a narrow drawer with movento sliders? Two modules wouldn’t fit in the space between the sliders
@BlumInc
6 ай бұрын
Unfortunately, we cannot recommend using it with just one TIP-ON unit.
@s70cas7ic0
6 ай бұрын
@@BlumInc thank you, I wanted to try that in a 24cm wide (internal) cabinet
Hi, Anyone know why one of my tip-on blumotion drawers suddenly makes a click then pops back open after closing?
@BlumInc
7 ай бұрын
Hey there - Please call our customer service department at (800) 438-6788. There are a few things that could be causing this issue. Thanks!
@itbiytc9299
5 ай бұрын
I have the same problem. I am living in Belgium. How can Blum help me? @@BlumInc
Does the Tip-On device work on all Blum slides?
@BlumInc
3 ай бұрын
No, the TIP-ON BLUMOTION mechanism is only compatible with our MOVENTO runners.
Don’t understand how to use the orange block thing what are the measurements referring too? The thickness of the drawer front? Mine are 3/4”.
@BlumInc
3 ай бұрын
What you're seeing is called a Front Gap Template. This piece helps set the 1/8" gap needed between the drawer front and the runner.
@lhartwig2354
3 ай бұрын
@@BlumInc but don’t understand how to you it. You mentioned a measurement for which side to use but didn’t show what that measurement was referring to. Again I didn’t understand how to use it. I have one drawer even though everything is the same does not have a gap so it doesn’t work. And several and it takes two hands to push to open even though I have sync rods in all of them.
mine opens by itself, any ideas?
@BlumInc
Жыл бұрын
Hey there - Please call our customer service department at (800) 438-6788. There are a few things that could be causing this issue. Thanks!