Adding to the chorus-- these videos are clear both in describing the principles of operation and the steps in installation and repair. They have been very helpful to me. You are doing a great service.

@AmreSupply

Жыл бұрын

Thank you Doug, we're just happy to help! We're urrently filming a series on refrigerator repairs which will be in a similar format to this: kzread.info/head/PLCo9SMjkdWBysYYCcg5xQLiVh_cW0JQvt Cheers!

To think I was going to buy a new one. Now I have some things to try... From one KZreadr to another, Thanks!

@AmreSupply

3 жыл бұрын

You're welcome Peter! We're glad that you found the video helpful and we appreciate the support from a fellow KZread creator!

I love your videos! You are one of the best plumbing resources on youtube.

@AmreSupply

3 жыл бұрын

Thank you Nick, we're glad that you're enjoying our videos! Its great to hear that our videos are making an impact on youtube! We're currently working on appliance repair so it will be a little while until we do more plumbing videos!

Very helpful and got right to the point(s)! Well done.

@AmreSupply

5 жыл бұрын

Thanks Jesse, we're glad you found it helpful!

I love all of your Sloan videos. Very helpful :)

@AmreSupply

6 жыл бұрын

Thank you Lathen, it means a lot to hear that these videos are helping people! We're glad you enjoyed the series.

Thank you so much. This is a cost saving video. Extremely helpful!

@AmreSupply

2 жыл бұрын

You're welcome, we're just happy to be helping people out!

This is the second one for the basement bat. kzread.infoUgkxOuLt8IL_GxhhaK8DBuKEL-zV0UJVpWZn , works great

@AmreSupply

Жыл бұрын

Thanks for watching, we're glad that we could help!

vance, You go a great job. So easy to follow. Thank you.

@AmreSupply

4 жыл бұрын

You're welcome Catherine! We're glad you found it helpful!

You are a fantastic teacher I watched once and became a technician lol if it goes wrong I can always watch again but don't think I'll have to.

@AmreSupply

2 жыл бұрын

Thank you, we're just glad that you found it helpful!

just a fantastic job its crazy how hard some of this stuff is to find. thank you, subscribed!

@AmreSupply

7 ай бұрын

Thank you for the subscription, we're just glad you're finding these videos helpful!

Thanks thats what i needed to see

Trying to fix a Kholer but this vid gave me plenty of places to start eliminating options! Thanks so much!

@AmreSupply

Жыл бұрын

You're welcome! A lot of the principles are similar even between different manufacturers, so we're just happy to help!

Awesome, thanks for this. Just what I needed at work until someone who knows that they're doing will come.

@AmreSupply

2 жыл бұрын

You're welcome, we're just glad to help!

Great video! I appreciate the tip about how to check the batteries.

@AmreSupply

9 ай бұрын

Thank you, we're just glad you found it helpful!

Very helpful video, thanks I solved my problem.

@AmreSupply

6 жыл бұрын

Thanks Marcos, I'm glad the video was helpful!

very helpful! thank you for a public service.

@AmreSupply

3 жыл бұрын

You're welcome Jon!

Great video. Keep up the good work👍

@AmreSupply

3 жыл бұрын

Thank you Eric, we're glad that you found the video helpful!

Very helpful! Got right to the point

@AmreSupply

5 жыл бұрын

Thanks David! We're glad you found it helpful!

Saved my butt...THANKS!

@AmreSupply

4 жыл бұрын

You're welcome Ben!

Excellent, thank you for this.

@AmreSupply

3 жыл бұрын

You're welcome Jack!

professionally done!

@AmreSupply

3 жыл бұрын

Thank you!

Nice!!! Very helpful.

@AmreSupply

4 жыл бұрын

Thanks you William, we're glad you found the video helpful!

Good. Helped put me on right track.

@AmreSupply

2 жыл бұрын

Thank you, we're just happy to hear that!

good information, pretty well explained

@AmreSupply

Жыл бұрын

Thank you, we're just happy to help!

Very interesting video I’ve been looking for this lecture videos Plumbing is my profession I deal with the Sloan Optima products We upgraded from manual to automatic both Water Closets and the Stall Urinals We face a lot of challenges But this video brings a lot of good illustrations Thanks a lot for this videos More of it

@AmreSupply

Жыл бұрын

You're welcome, we're just happy to help! If you're curious we have an entire playlist with all 15 Sloan videos. It might be a good one to save for reference: kzread.info/head/PLCo9SMjkdWByMAtNJtJoV9e3hvdkojlRz

Awesome video, wouldn't have ever guessed that you could check the battery by holding the override for 40 seconds. Thanks for the help! Able to fix our women's restroom before the day started ;)

@AmreSupply

5 жыл бұрын

Thanks for commenting FerusZaz. Sometimes those little checks for battery power or resetting are buried in the manual. We're glad you could get everything fixed in time!

Great video! Thank you

@AmreSupply

4 ай бұрын

You're welcome!!

Thank you for your help

@AmreSupply

Жыл бұрын

You're welcome!!

Thanks for your help

@AmreSupply

3 жыл бұрын

You're welcome Johnny!

Very helpful thanks for sharing it.

@AmreSupply

5 жыл бұрын

You're welcome Maurice Packer! We're glad you found it helpful!

Good info very helpful.

@AmreSupply

2 жыл бұрын

Thank you, we're just happy to help!

Awesome job thank you so much

@AmreSupply

2 жыл бұрын

You're welcome, we're just happy to help!!

Good tutorial - TY.

@AmreSupply

Жыл бұрын

You're welcome!

great video...

@AmreSupply

3 жыл бұрын

Thank you Zak!

Thank you

@AmreSupply

4 ай бұрын

You're welcome!

Hi thank you saved my jobe.

@AmreSupply

8 ай бұрын

You are welcome!

Short n helpful

@AmreSupply

3 жыл бұрын

Thanks for watching!

Thanks

@AmreSupply

4 жыл бұрын

You're welcome Vanni!

I like this video

@AmreSupply

11 ай бұрын

Thank you, We're just happy to help!

Thanks 👍🇺🇸

@AmreSupply

7 ай бұрын

You're welcome!

what size are the hex head bolts on the sensor cover? i have metric and imperial and none seem to be fitting?

@AmreSupply

2 жыл бұрын

Thanks for watching. The cover will require a 7/64" hex wrench to remove the bolts.

I assume you can change the solenoid without turning the water supply off right?

@AmreSupply

6 жыл бұрын

Hi 4gasem, when changing the solenoid the water should still be turned off at the control stop otherwise water would leak during the repair. Fortunately we made a video on how to replace the solenoid, you can watch here: kzread.info/dash/bejne/ZJZh2pWvkdradqQ.html

I was hoping to find guidance to troubleshoot ghost flushing in a dark room. I can hear the flush from the next room about every 2 hours.

@AmreSupply

3 жыл бұрын

Hi Daniel, thank you for watching. If the flushometer flushes randomly every couple hours then it could be an issue with the sensor. Alternatively it could be an issue with the diaphragm. If the diaphram doesn't have a good seal and isn't seated properly on the valve then a tiny amount of water might leak out of the upper chamber. If it looses enough water over time then it will trigger a flush. It would be a good idea to remove the diagram, clean the valve seat, inspect for any nicks or dents that might cause a leak. As well its best to replace the diaphragm as the rubber can deteriorate over time. Hope this helps!

So I have this Sloan optima that clicks but doesn’t flush, changed batteries and solenoid but still doesn’t flush. Any help would be appreciated

@AmreSupply

5 ай бұрын

Thanks for watching. It's possible that the relief valve/ diaphragm is clogged. If no water is released from the upper chamber, then there won't be the pressure differential to open the valve for a full flush, you can see more in this video: kzread.info/dash/bejne/lHyFw6Vml7e_hsY.html

Please show a close up of the bi-pass hole. I can't see it to check for obstruction or enlargement. I have the whole flushometer completely disassembled and need to know how and where to look for the bi-pass hole. Otherwise I cannot determine why the water keeps flowing.

@AmreSupply

Жыл бұрын

Thanks for watching. It has been a while since we've filmed these so I don't have all the parts directly infront to look closely at. Some diaphragms like ones used in Delta has a very explicit bypass hole. The manual sloan flushometers it can be seen on the bottom. For these automatic sloan models, i am not sure where the bypass holes are, it could be close to the center column or a slit somewhere. These are not giant holes so they are not always obvious unless there is extra material around it. www.amresupply.com/part/EBV-1023-A-SLOAN-REPAIR-KIT-F-BATTPWR-URI In any case if you notice a buildup of calcium then that could be plugging it. As well look for any corrosion or anything that would prevent the diaphragm from sitting properly on the valve seat as this can sometimes prevent the upper chamber from filling properly. If that doesn't help then it might be best to install a new diaphragm..

Hi to replace batteries do i have to ahut off water?

@AmreSupply

15 күн бұрын

Thanks for watching. When accessing the batteries the water does not need to be shut off: kzread.info/dash/bejne/dHuWtJhxibCoc5M.html

Hy sir can you help me I have same problem here

@AmreSupply

Жыл бұрын

Thanks for watching. What problem are you having with your flushometer? Is your problem mentioned in the video?

Where is this bypass in the diaphram??

@AmreSupply

2 жыл бұрын

Thanks for watching. The bypass should be a small slit around the edge of the diaphragm. As an example you can see the white showing through on this image: www.amresupply.com/thumbnail/product/1594127/1000/750/EBV-1020-A-Sloan-Water-Closet-Flushometer-Flex-Tube-Diaphragm-Kit.jpg Which is on this part www.amresupply.com/part/EBV-1020-A-SLOAN-REPAIR-KIT-CLOSET-1-6GPF There might be some variation not every diaphram will look exactly like this but that's where you'd check.

How about a noisy finish to a flush???

@AmreSupply

2 жыл бұрын

Thanks for watching. Try adjusting the control stop. A noisy finish to a flush can happen when the water pressure is quite high. In this case the water is rushing by the valve as the space is getting smaller, likely causing that sound.

Mine is leaking? Dud something wrong going back.

@AmreSupply

3 жыл бұрын

Thanks for watching. If water is leaking out of one of the connections then you might need a new o-ring for that connection. If a little bit of water is coming out of the flush pipe, then its most likely a worn diaphragm.

Manual flush valve is >

@AmreSupply

4 жыл бұрын

Thanks for watching. This is the manual flushometer: kzread.info/dash/bejne/h6Sf05qqedqqZbA.html

I have problam

@AmreSupply

4 жыл бұрын

Thanks for watching. What is the problem you are referring to?

@robertdaniels857

2 жыл бұрын

videos are very helpful and easy to understand!

👍🏽👍🏽👍🏽

@AmreSupply

Жыл бұрын

Thanks for watching!

It's 1 am how did I get here

@AmreSupply

2 жыл бұрын

Thanks for watching!

@justanawkwardddlcfan

2 жыл бұрын

@@AmreSupply hey no problem man

Plz plz

@AmreSupply

3 жыл бұрын

Thanks for watching.

ultima is crap. we replaced with a side autoflush.

@AmreSupply

3 жыл бұрын

Thanks for watching.

Français SVP

@AmreSupply

9 ай бұрын

Thanks for watching.

Why my when I flushed make a noice

@AmreSupply

2 жыл бұрын

Thanks for watching. High water pressure can cause noise as water rushes through the valve. In some cases the unit will flush normally but the sound will appear only as the valve starts to reset. Try adjusting the control stop. In some cases this can help but if you close it too much there won't be enough water to flush the valve.

Thank you

@AmreSupply

4 жыл бұрын

You're welcome!