Great video thank you

thanks anh nhiều lắm.

Cool Thanx. Greetings from Texas

@bigrigfix

Жыл бұрын

Greetings from Arkansas.

Love all your video

Excellent work

Good job on the video

Hi thanks for the awesome video, I used my power probe I got a ground signal but not a signal from the power wire (if that make sense) the controller inside the cab is working it turns the blower on I can turn the temp up to heart and switch the flow from floor to windshield ect, the clutch moves freely but still will not run any advice

When you making the video on how to use meter especially the power pro I’m a newbie

You just did R & R on compressor. I want to replace the clutch coil only. My compressor is still good

What's that tool you are testing with in the beginning

Where does the power come from the controls? And why doesn’t my fan come on with ac compressor already replaced high pressure switch compressor gets power and then 5 seconds turn off pressures good

Where the links to using a multimeter to test

I have a coming 6.7 engine and the plug is positive on both sides of the compressor why is that

Great video… I just changed my compressor two days ago on my M2. Still not kicking on. Any suggestions

@bigrigfix

Жыл бұрын

Check the ground wire it goes to the starter.

Where is your shop located?

👍👍👍

I wish i understood what hes saying. Im about to do this repair

I changed my AC compressor and D but still AC compressor do not kick

@bigrigfix

3 жыл бұрын

Check your ground wire it’s connected at the stater ground .

@andrewade339

3 жыл бұрын

I check for ground which I have but no power don’t see any issue with the power wire know where the fuse located at?

Why you change your voice? It's hard to understand

The voice sounds like you're an airplane pilot

I also tested the compressor and the ground came around

@bigrigfix

Жыл бұрын

The ground wire to the compressor goes the starter ground.

@demarcusdavis7008

Жыл бұрын

I tested the ground it was good I didn’t get ground nor a positive reading from the controller wire so now I’m going to hot wire it directly from the BAT to the compressor Thanks 🙏🏾

Practice on speaking more clearly to much mumbling or straying off while talking.