Would be great to hear it without the music overlaid on top of the exhaust note too

@cplclaudio

3 жыл бұрын

God i know how awful, the worst time to keep the music going.

@Lvdw1999

6 ай бұрын

That's why he placed the raw audio link in the description lol

I love the choice of music 🤓🤓 And the sound of the exhaust 🤌🏽😙

Great build series .. saving to install this on my trident 😋☺️

@MotoMachines

3 жыл бұрын

Glad you're enjoying it!

Nice sounding exhaust

Amazing sound!

Mines under fabrication and hope to get it the end of September 😍🏴󠁧󠁢󠁥󠁮󠁧󠁿

Do you need back to stock to get the state inspection or not???

Sound very good🤙🔥🔥and looks Nice 😎a feew more hp??

@MotoMachines

3 жыл бұрын

Yes! We got the bike on the dyno again and have a video coming out this weekend showing what the HP gains were over stock!

Super...... 😎

Zard sounds great on my trident!

@leonhenry4861

3 жыл бұрын

You got video footage?

@trevorroeder117

3 жыл бұрын

@@leonhenry4861 Phone speakers won’t do it justice I suggest headphones but it will never be as good in person. kzread.info/dash/bejne/kaZ1o5ahZbjTk6g.html

@djp5014

3 жыл бұрын

Did you tune afterwards?

@trevorroeder117

3 жыл бұрын

@@djp5014 No, Zard claims you don’t need it but i think it could use one.

@janguitarw2023

4 ай бұрын

Also with db killer (euro 5)?

Hey great vid! Nice work Can you tell me what torque specs used for the header nuts and o2 sensor nut?

@MotoMachines

2 жыл бұрын

We didn't use a torque wrench. We just turned it until we felt it was tight enough. Header nuts & the o2 sensor don't need a lot of torque to be tight.

@TH-rs3fs

2 жыл бұрын

@@MotoMachines ok gotcha, thx

What tail tidy kit is partially shown, please? Great video. Thank you.

@MotoMachines

Жыл бұрын

Evotech Performance, we just sold out but should have more back in stock soon. www.motomachines.com/evotech-performance-tail-tidy-triumph-trident-660-2021

How much for all component?

Hi Michael. I got mine here in PH too because of this review :) The issue is I always get backfires on decels. Can remap can solve this? Im using the dB killer version btw.

@MotoMachines

Жыл бұрын

Yes, a custom tune can help this.

Is it possible for you to make a video of how to remove the db eater from the zard exhaust system? I took the sprinkler but the db eater doesn't come out

@MotoMachines

2 жыл бұрын

Unforuntately we no longer have this bike. From what I remember you have to drill out a rivet and remove the baffle with some pliers.

Cool! Is it annoying for long rides also do you think it’s too loud for city riding? Many thanks

@MotoMachines

2 жыл бұрын

Not at all! Of course any aftermarket exhaust in cold weather is going to sound louder than stock but it's nowhere near some other bikes. We use Alpine earplugs to ride, shameless plug you can find them on our website, no pun intended on the plugs!

Hi, can you please measure the DBs while standing? Is this the normal Exhaust Version or Race Version which you installed and drove? Thx

@MotoMachines

3 жыл бұрын

This is the race version. It measures about 98dB at idle from 5 feet away.

@Daniel-dj7fh

3 жыл бұрын

@@MotoMachines my bike is not even allowed to make 94dB at 4000rpm lmao

@MotoMachines

3 жыл бұрын

@@Daniel-dj7fh oof. Our dB meter also is off Amazon, so whose to say it is accurate haha.

Does the OEM belly pan fit with this exhaust?

@MotoMachines

3 жыл бұрын

I can't comment on whether or not the OEM belly pan will fit with any exhaust or this one specifically because we didn't opt for that option when purchasing the bike.

Esta homologado para Inspección técnica de vehículos en España?

@MotoMachines

3 жыл бұрын

Este modelo no cumple con Euro 5. Pero Zard vende una versión homologada.

Hello Sir, did u replace the stock air filter with an after market one after fitting the full system to the bike?

@MotoMachines

2 жыл бұрын

We did not replace the OEM air filter

@thatisnotimportante9297

2 жыл бұрын

@@MotoMachines Thank you for your reply Sir. Appreciate it from the Philippines. I actually ordered mine via a local seller here after coming across your video. Can't wait to get it on the bike once it arrives. Thank you again.

@MotoMachines

2 жыл бұрын

@@thatisnotimportante9297 Nice! Enjoy it!

Does the zard muffler comes with a detachable dbkiller?

@MotoMachines

2 жыл бұрын

It does, although to be honest it doesn't do much.

Do you recommend getting the euro 5 option for street use?

Do those header inserts include the gasket? I didnt see it in the video

@MotoMachines

2 жыл бұрын

No, replacement gaskets are not necessary. You have to reuse the OEM ones. It wasn't shown because the header gaskets didn't fall out when I installed the exhaust. If you're having trouble keeping the gaskets in place, put a very thin film of grease on them to help them stick to the engine case. This will NOT hurt anything, saves you a headache, and the grease will simply burn off when the engine gets hot. -Michael

@RandomGRK

2 жыл бұрын

@@MotoMachines Excellent. Thanks for the response and the tip!

È omologato?

Do i have to remap after putting this exhaust?

@MotoMachines

3 жыл бұрын

Zard states that you do not, but as with all motorcycles I highly recommend a tune from a reputable tuner.

Would have been great if you show how to remove that o2 clip sensor 😢

Hi!) want to buy exhaust! Here is the question: Did the fuel consumption increase after you installed the exhaust?

@MotoMachines

2 жыл бұрын

Hi, we do not know as we did not have the bike long enough to know.

Do you think Trident is good for touring? Can a couple of thousand kilometers be covered comfortably?

@MotoMachines

3 жыл бұрын

It can absolutely be done, you can tour on any motorcycle if your determined! Be sure to check out the other videos in our build series. We do an overview on the Hepco & Becker C-Bow system(saddlebags) and a tank bag! We have a rear rack video scheduled as well to attach a tail bag, just waiting on the rack to arrive from Germany!

@michaelparks7563

3 жыл бұрын

I have 1,300 miles on mine. I believe it would be comfortable to tour on as I am planning a cross country road trip on mine.

Does it fit to 2022 trident？

@MotoMachines

2 жыл бұрын

Yes the 2022 Trident remains unchanged and this will fit.

I hate to sound stupid but the black version says silencer racing and the stainless says REMOVABLE DB KILLER, what is the difference?

@MotoMachines

Жыл бұрын

The only difference is the color.

Put a zard on my 2022 mt07, losing about 20% power and now significantly slower than my wife's stock 2021 sv 650... thoughts?

@MotoMachines

Жыл бұрын

Too many variables that could go into this for a quick answer. Visit this link to contact us so we can better assist www.motomachines.com/contact

I have installed the zard exhaust on my trident 660 and I feel the bike is running hotter. Is this normal?

@MotoMachines

Жыл бұрын

That's not something that we noticed.

@trevorroeder117

Жыл бұрын

If anything it should run cooler unless your install wasn’t done correctly.

My friend, can you upload the videos with the option of subtitling in Spanish please !! 🙏🏿🙏🏿

Is a new map necessary?

@MotoMachines

2 жыл бұрын

A new map is HIGHLY recommended as this is a drastic change to the bike.

@jerryx2000

2 жыл бұрын

@@MotoMachines would you got to a tuner or download a map with my specs from tuneecu?

@MotoMachines

2 жыл бұрын

@@jerryx2000 We've done a video on this entirely and its up to you which route you'd like to go. With new bikes it is easiest to send the ecu out to a tuner. kzread.info/dash/bejne/q2dq16mkma6sqdo.html

@MotoMachines

2 жыл бұрын

@@jerryx2000 I would go to DNK Tuneworks, she makes it as easy as possible and we were INCREDIBLY happy with the tune.

@jerryx2000

2 жыл бұрын

@@MotoMachines I live in Switzerland. Do you think the map can be installed using TuneEcu.

Is it euro5 compliant?

@MotoMachines

3 жыл бұрын

This model is NOT Euro 5 compliant, HOWEVER Zard does sell a Euro 5 homologation model that we can get in!

@MohitSapra97

3 жыл бұрын

@@MotoMachines is there there a link for its sound and flyby. I’ll be honest, i want a exhaust that sounds good and let its presence know but not too loud, it can be annoying on long journeys.

@MotoMachines

3 жыл бұрын

@@MohitSapra97 Sure is, we actually put out a flyby video right before this one. Here is the link: kzread.info/dash/bejne/gaaX16WIgdObdpM.html

@MohitSapra97

3 жыл бұрын

@@MotoMachines this video shows the racing version, do you have a video with the euro 5 compliant version? Chears!

@MotoMachines

3 жыл бұрын

@@MohitSapra97 We do not.

Price?

@MotoMachines

2 жыл бұрын

This exhaust is available for purchase on our website which you can find here: www.motomachines.com/zard-exhaust-full-system-triumph-trident-660-2021

what is difference in weight? dyno measurements?

@MotoMachines

3 жыл бұрын

The weight difference is in the video during the table top portion. As far as dyno measurements, check out this video kzread.info/dash/bejne/aIqOuMuQpdWThbw.html&pp=sAQA

Any Black Friday sale? Please?!!!

Ah geez gotta break the bank again

@MotoMachines

3 жыл бұрын

Did I mention we ship for free?

@biglez5555

3 жыл бұрын

You guys shippp???

@biglez5555

3 жыл бұрын

It says out of stock😟

@MotoMachines

3 жыл бұрын

@@biglez5555 If it is out of stock, you can still place the back order and then we can get it in for you. Its a popular exhaust right now so it sells out quick. Placing a backorder will GUARANTEE you get one.

@MotoMachines

3 жыл бұрын

@@biglez5555 If it is out of stock you can place a backorder for the item and it will take about 3-4 weeks to come in.

Why won’t the reviewers tell us how much these systems cost ?

@MotoMachines

2 жыл бұрын

We don't provide costs in videos because prices can change over time due to manufacturers changing prices in accordance to material cost.

@dougsmith7580

2 жыл бұрын

Moto Machines…..Fair enough. I like your videos despite my random peeves, very informative and clear.

Just FYI those aren’t bolts on the head. Those are nuts that are on studs. Pretty basic mechanics 101.

Italian exhaust on this British masterpiece? No thanks. Get a Scorpion instead! #buybritish

@MotoMachines

2 жыл бұрын

We did a video on that too! kzread.info/dash/bejne/i4qgt5agqazRh8o.html

kinda cringed when you were taking the header bolts out and the radiator was moving around. Shallow well sockets would work better for keeping your wrench out of the radiator cooling fins.