Triumph Jubilee Bonneville (T140VJ) - Light Renovation - Part 14 - Assembly Part 1 - Front End
Автокөліктер мен көлік құралдары
It's happened! At last! Assembly has begun with the front end. No more painting! Errrrr ........... the saga continues. Progress is made though - honest.
Channel email: bsapowerset@gmail.com
T's and other parts: www.ebay.co.uk/usr/bsatriumph
#Triumphbonneville
#T140V
#Jubileebonneville
Пікірлер: 10
Great tips on touch up’s, truly appreciate your attention to details. Enjoy your work thoroughly, Thank You.
@BSAPowerSet
Ай бұрын
Thank you Max - most kind.
Great stuff..
@BSAPowerSet
Ай бұрын
Cheers Richard and thanks for the interest.
@matthewharmer1656
Ай бұрын
Looking good,I think the lower mudguard fixings should be unc bolts,not slotted screwdriver ones, good progress on the rebuild!!
@BSAPowerSet
Ай бұрын
Hi Matt - thanks. Yea you're right - those slotted screws will be replaced with hexagonals.
It’s coming along nicely.
@BSAPowerSet
Ай бұрын
Cheers Martin - yes not too shabby at the moment.
Those chrome bolts on top of the mudguard should have the nylon washers under the heads, to protect the paint, not between the bracket and mudguard, although on mine I used a thin layer of vinyl sandwiched between them to protect the new paint on the inside. As mentioned in another comment, the bolts holding the stay to the spindle clamps should be UNC hex set screws, but they don't have a nut on the back, as they are only 1/2" long, and should have a spring washer under the heads, not plain.
@BSAPowerSet
Ай бұрын
Hi Rick thanks for the info. I’ll take another look at the nylon washer position. The stay screws I know are wrong which I think I stated in one clip so these will get sorted once I source some UNC bolts. Cheers.