I will definitely be adding this attachment to my shop. Love your channel, man.

@TyrellKnifeworks

Ай бұрын

It’s how I sharpen everything! 😉

The simplicity and beauty of that knife tickles my mind.

@TyrellKnifeworks

Ай бұрын

Thanks for checking out the series!

the half round file tip on sanding the palm was great. I always pick up a valuable nugget of advice from you. Thanks for that!

@TyrellKnifeworks

Ай бұрын

Glad to help! Thanks for watching

what a gorgeous blade profile....and that blade finish, chef's kiss

@TyrellKnifeworks

Ай бұрын

Thanks for checking it out, Paul! ❤️

Thanks for posting this!

@TyrellKnifeworks

Ай бұрын

Thanks for watching, Bryson! 🙏

What an awesome design. 🥰🥰

@TyrellKnifeworks

Ай бұрын

It’s how I sharpen everything! Thanks for watching.

Bonjour et merci beaucoup encore et toujours pour vos vidéos très instructives. Moi qui suit débutant j'en apprends à chaque fois plus. Longue vie à votre chaîne ainsi qu'à Patréon qui regroupe tellement d'artistes, de créateurs en seul lieu.

@TyrellKnifeworks

Ай бұрын

Merci beaucoup d'avoir suivi la série !

Love the content! Made a sharpening jig like this a few years ago and I find I use it more than my wicked edge gen 3 also. Only thing I do different is I actually decrease the jig by about a degree when going to the leather. It seems like the leather is soft enough to roll over the cutting edge and can somewhat dull it as opposed to strop it. Yours doesn’t seem to do that, but my belt is getting pretty old I guess! Good work!

@TyrellKnifeworks

Ай бұрын

If you're rolling over the edge then it's too much pressure on the stropping belt. You want zero pressure and you're using the compound to remove the burr only. Thanks for watching.

I've got a rigid bar looking at that sharpening system

@TyrellKnifeworks

15 күн бұрын

Well I've inspired you in some way at least! Thanks for watching.

I love your videos my friend 👍 I'm going to order one of those sharpers it's much faster than the work sharp. Even though I can get a razor polished edge on them it just takes too long

@TyrellKnifeworks

Ай бұрын

Yup, you’ll find it way faster. If you get multiple holders (the kit linked in the desc comes with 2) then it’s quite fast to do multiple knives. Thanks for watching, Richard.

Another video full of great tips! How does one clean the buffing wheels? Thanks again Dennis!

@TyrellKnifeworks

Ай бұрын

You can buy wire brushes and just run them against it. I also just use paper towel to remove it sometimes if there isn’t much. Thanks for watching.

Good Morning 😁

@TyrellKnifeworks

Ай бұрын

Good morning, my friend! ❤️

What's your favorite brand of sandpaper for finishing handles?

@TyrellKnifeworks

Ай бұрын

I’m really partial to sandpaper in rolls with adhesive backing for all my sanding. I don’t like having to cut it up into strips. I use DuraGold brand. There are links in my Amazon shop below in the video description. Thanks for watching.

Dennis, thank you! Just out of curiosity: is there anything wrong with clear polyurethane on the handle?

@TyrellKnifeworks

Ай бұрын

It’s not my preferred finish. It just takes awhile and it’s messy to apply and not get it on the blade. Thanks for watching.

Sweet...but 26 degrees inclusive or per side 13 degrees? Thx

@TyrellKnifeworks

Ай бұрын

We always discuss sharpening angles per side. I use 26 degrees for each side on a hunter like that. Chef knives would be 12-17 degrees per side. Thanks for watching.

@fredb7814

Ай бұрын

@@TyrellKnifeworks I See. Thank you .

Will it work with the TW 90?

@TyrellKnifeworks

5 күн бұрын

I believe the TW90 has a 1.5” tool arm receiver on the platen? If so, it will work. Thanks for checking it out.

I will do it the reverse way in case and not the knife edge facing you

@TyrellKnifeworks

4 күн бұрын

The belt is going extra slow, there’s no danger here, but whichever way works for you. Thanks for watching.

我终于第一个发出评论！

@TyrellKnifeworks

Ай бұрын

😉感谢您的观看！

Just wanted to say as a rookie wanna be, I have thought for the last couple of years that Walter Sorrells hung the moon and all that....well my fine friend, you just may have taken over that position for me, your videos are absolutely awesome, all of them!!!, even when your wife hollers out about going to work😂😂😂!!!::))) just please please keep up the great work!!!::))

@TyrellKnifeworks

Ай бұрын

Thanks so much! My wife appreciates the attention. 🤣. Thanks for watching.