Tricky mechanism that will be needed in every workshop!
Ғылым және технология
Hello friends! In this video, an interesting idea for each workshop!
Friends, my name is Vanya! I am the author of the channel HandCraft.
On this channel I present everything that I have done with my own hands.
Creative ideas, useful tips !
We turn simple things into unique ones! Subscribe, it will be interesting! #craft #wood #diy
Пікірлер: 229
Friends, how do you like the design and practicality of this tool?
@JEYD220699
2 жыл бұрын
This is brilliant! 2 in 1 clamp! 😯
@benorth0311
2 жыл бұрын
Absolutely true headliner! If and (when) I get a welder and a metal lathe, this is the first project. Just found your channel last month. Love it!
@benorth0311
2 жыл бұрын
@@JEYD220699 what I call twofer
@step-hainevasverslapaix4861
2 жыл бұрын
🟦⬜🟥😉👍🏻
@fabricemenoud3296
2 жыл бұрын
👏👍 je suis épater, bravo pour le travail 👏👨🦽💨
Vanya, I saw your teeter-totter how-to-make video. You are a SUPER DAD !! Your children must love you so much !
I am a beginner to woodwork, the main test I have with this bundle kzread.infoUgkxTNB_zFBSnTo_O1PqfVUwgi7ityw0JlKt is that I think that its hard to settle on a choice of the plan and outline to use as there are a large portion of them there. Nonetheless, I like the simple stride to step directions laid out there.
I have this type made from aluminium. If I remember correctly, EXPENSIVE!!! This is a great design. Simple & straight forward. Thanks
Une brillante idée, un super concept et une réalisation impeccable !!! Bravo et un grand merci pour le partage 👏🏾👏🏾👏🏾👏🏾👍🏽👍🏽👍🏽👍🏽🙏🏽🙏🏽🙏🏽🙏🏽
When this guy says, "Hang on, I've got an idea", I am going to pay attention.
Wow !!! tout simplement génial ton système ! 👍🏽👍🏽👍🏽 Bravo pour cette réalisation et merci pour ton partage 😊
That is a great idea. Excellent design!
Excelente proyecto muy bien desarrollado y mejor ejecutado , una buena herramienta/prensa muy original y peculiar , gracias por compartir tanto ingenió y conocimientos , un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓 🔝
Coolest multi directional clamp design! 👍 Great video and excellent job!
Genial !!! me encantó, te felicito y gracias por compartirlo.
So well and cleverly done!!!! A masterpiece!!!! Thanks for the idea!
Very clever and practical. Thank you for sharing!
Thanks for sharing those tips and the make!
I am sure i'll make this for the next project. Big thanks sir.👍
Brilliant idea and design thanks for sharing
Clever! Great idea and execution.
This is a very interesting clamping system. We shared this video on our homemade tools forum this week 😎
awesome idea and execution
I like it ,,,, Thanks ,,,, I will make a set
Excellent bravo 👏
Briliant idea.
You are a genius. Brilliant!
a very great idea
Brilliant just brilliant well done
Thats a cool idea! Well done and thanks for sharing.
очень оригинальная струбцина , надо взять на заметку
Great work.
Weld the eye closed or it will open up over time. Interesting build. Thanks.
That is awesome. Thank you
very nice project thanks for sharing
Ingenious.. Bravo.. I will make one.. tomorrow..
Great design and very useful!!
Thank for sharing my friend
That's the best idea I've seen in a long time. I will definitely build this for my shop.
@PreservationEnthusiast
2 жыл бұрын
A waste of time and materials. I wont be building one for my shop
@ecokestove
2 жыл бұрын
@@PreservationEnthusiast We are all pleased to know you will not be building one. Thank yopu for telling the world.
@PreservationEnthusiast
2 жыл бұрын
@@ecokestove Were yopu also pleased to hear that Josh Stephens would be building one?
Interesting! Thank you
Very nice. Pressure in both directions by desgin. Thx for sharing.
Wow. so useful, and so easy and quick to make.
@normansidey5258
Жыл бұрын
I trust you are being ironic?
Most Excellent!!!!
Very well thought out!!!
Those look really useful!
Nice build ❤️
Clever Concept.
Very clever design! Well done!!
Really well done in craftsmanship. I'd only change the tightening handles or install a spring mechanism to save force in tightening up. But again: really well done!
Beautiful
Bravo………. Simply brilliant
Excellent !
Amazing!!
Wickedly awesome well done
Great design and could even be expanded upon for larger or even pieces with "strange" angles. Might even be better than the belts and clamps I use periodically
Love the clamps!
Very cool idea.
Cool. Love it
This is a great realization of the idea. My only caveat can also be encountered using the less sophisticated method of conventional bar clamps with separate clamps to squeeze the cauls. When pressure is applied on the cauls to flush up the clamped pieces, any pressure applied on a cantilevered part of the caul, rather than inboard, acts to bend the cauls slightly, lifting the pressure in the middle of the glue-up and allowing the members to slip and slide to an unflush condition, defeating the function.
@davidbostock6933
2 жыл бұрын
So, angle iron bolted on sides to faces would reduce that ?
@leehaelters6182
2 жыл бұрын
@@davidbostock6933 yes, it definitely would. But no need to go to that length, when the remedy is merely to shift the pressure applied vertically to a point inboard of the edge of the stock. Goes for all applications, the subject of the video included! In the pictured case, extending the clamping screw less would allow the apparatus to engage the caul a notch or so farther inboard. If that point is even only slighty in from the edge of the stock, goal accomplished!
@matthewcarlson2939
2 жыл бұрын
I wish I knew what that meant. Guess I’ll have to look up some terminology…
@leehaelters6182
2 жыл бұрын
@@matthewcarlson2939, imagine this: a freshly made S'more (do you know the Girl Scout camping confection?). Now, you are trying to spread the filling between the two Graham Crackers by squeezing with a pair of popsicle sticks laid flat on top and bottom. If you just squeeze those sticks by their overhanging ends, they might flex so much that the stuff in the center does not flow but the crackers break in half. Rather than letting that happen, you squeeze with your fingers closer to the middle of the sandwich, the sticks don't deflect as much, and a tasty, more evenly spread treat is achieved. Well, I guess that was just as obscure, sorry. What are the terms I used that were not clear? Cauls? Cantilevered?
@napadave58
Жыл бұрын
@@matthewcarlson2939 That? It means "the thing there."
I will build one. Thanks!
от жэш кайфанул от идеи!!!! ;-) ;-) ;-) шыкарно!!!
that's fantastic
Impressionante!!! 😀👍👏🤝👆
Nice tool 👍
great idea!
very nice and a dam good idea very very good!!!
Комментарий в поддержку канала и ролика, а также труда мастера.
Very fancy
nice work, keep it up
I _thought_ it looked like you were making a clamp. A unique and handy tool for _anyone._
Brilliant.
Nic work 👍👍👍
Very nice.
very nice
Clever!
Very cool video and amazing!!!!!!!!!!!!!!
Bombe, ... soooo good.
Great very great
Gostei👍
Interesting setup. There might be a change in the last bit or two: Might want to use wax paper or maybe wax down the two horizontal surfaces, as they might end up being glued to your work pieces.
@petec6690
Жыл бұрын
The builder put something down to prevent gluing boards to the jig.
@hyselwatchandclockrepair1874
Жыл бұрын
At the 7:40 time he put masking tape on the surface of each clamp board.
Note to self. Skip to the end to see if what they are making is even worth doing.
cool thanks
Оригинальные ваймы 👍!!!.
That is really cool.
it's great! Nowwwww sell me a set so I don't have to do the metal fabrication :)
I doubt that everyone has the metal lathe to make the parts but it’s a cool tool.
@andybilakshow260
2 жыл бұрын
I'm sure there's a video laying around here somewhere to help in the lathe department. Or any other department for that matter. Search, find, think, build.💕
@MrSaemichlaus
2 жыл бұрын
Round standoff nuts with threads in the ends are available. A small section of pipe could be used as a spacer.
@Pain9682
2 жыл бұрын
I thought about it too, but you can be also be lucky to find pieces sold to the right size
Wow .... 😁😁😁😁😁 To good. 👍👍👍👍👍
Alight very smart built
Creative~malaysia boy👍👍👍
nice 👍
AMAZING!!!!!!!!!
@hand_craft
2 жыл бұрын
)))
This style of clamp has been available or over 30 years that I know of. I bought 3 sets in early 1990s at Woodcraft.
@hyselwatchandclockrepair1874
Жыл бұрын
I bought the hardware kit from WoodCraft in 1992, six sets, my oldest son has them now in his wood shop. I used white oak boards and mounted the hardware on them. I do see a slight advantage in these he made because the notches go all along the length of the board rather then the shorter length of the WoodCraft hardware set.
מעולה מדהים עיוצב ותכנון חכם
👍🏻very very good
✅🔥👍👍👍
Brilliant
Assalamalikum bai..good to see u. Stay connected
This is purely genius...maybe change the plywood for better material, maybe alluminium
@andybilakshow260
2 жыл бұрын
you just tripled the cost
@MrSaemichlaus
2 жыл бұрын
@@andybilakshow260 3*0 = 0
@andybilakshow260
2 жыл бұрын
@@MrSaemichlaus I see. You get your materials free of charge. Tell me, how do I get a cushy job like you?
@MrSaemichlaus
2 жыл бұрын
@@andybilakshow260 Come on, these parts don't cost much. The glue is easy to remove from aluminum too.
@andybilakshow260
2 жыл бұрын
@@MrSaemichlaus I don't worry too much about removing glue. If that's a worry for you, you're making an unnecessary mess. Not to mention wasting glue
Nice!! Just have to polish a rod
great idea, question, was it totally your idea?
جيد جدا جدا عقل جميل وفن وابداع
Beautifel
Neat!!
Nice jig. Love how it aligns everything. But what happens if one or more boards are just slightly wider than the rest? Say 1/16" wider. Or even 1/32". You'd have to make sure all the boards are the same width and be accurate at it. Not everybody has a nice tablesaw.
@stewartbonner
9 ай бұрын
re-cut that piece. unless you move your saw fence how would the piece be different dimensions?