Traxxas UDR body reinforcing
Ойын-сауық
Trying to strengthen the weak stock Fox body.
Sean Larmond / Jax RC Recycle and Repair
Facebook page
/ jaxrcrecycle
Facebook Group
/ 1474016102841179
Dynalube RC Get your grease here!
/ dynaluberc
Like those big shiny MFR rear suspension links? Get em here
metalfabbyreed.com/discount/e...
Over time I have had a LOT of RC’s of all kind and I’ve found a certain brands really stand out for reliability and performance, these are what I recommend
Traxxas Desert Racer, wow look at whats out for them now
rover.ebay.com/rover/1/711-53...
Awesome products that work great
Castle, pretty much anything from ESC’s to BEC’s to Motors Castle is awesome
rover.ebay.com/rover/1/711-53...
Crawler Innovations Tire Foams, they are the best for a reason
rover.ebay.com/rover/1/711-53...
Proline, this place has been around for a while and they make some of the best stuff on the market
rover.ebay.com/rover/1/711-53...
Traxxas TRX4, everything you can want for this truck is right here
rover.ebay.com/rover/1/711-53...
Holmes Hobbies for all your crawler needs
rover.ebay.com/rover/1/711-53...
Gens Ace Batteries
rover.ebay.com/rover/1/711-53...
Пікірлер: 47
$120 for that body? Traxxas is out of their minds! Liked the vid. Very helpful info
@ExocagedRC
6 жыл бұрын
Yeah they aren’t cheap at all.
Nice job, hope it works.🤞🏾Yeah you're right, other companies need to come out with bodies for this truck.
Use Teflon washers on the body screws to keep them from ripping out
I wish I saw a video like this before i bought mine. First run ripped the driver side off . Then the back. Oh well i was going to buy a clear body and paint it. I did reinforced the rest with duct tape and a strip of a beer can. I tell ya, i like the fox body better then the rigid.
@ExocagedRC
4 жыл бұрын
yeah I've beat on this quite a bit and its due for another body, it will either be another fox or maybe even the rigid this time, not sure.
Yes RC lexan bodies are vacuum formed from a sheet of lexan, so it's near impossible to have consistent thickness throughout the body. Trraxas Should do something about the lower rocker panel area on this truck. I have actually ordered a new UDR body and one of those holes were already cracked out of the Box.
I used the Shoe Goo & Drywall tape method for my X-Maxx 8S and still have the original body after 3 1/2 years and it's still holding up! I plan on doing this to my UDR body as well. Good idea about gluing extra plastic to support the bottom edges and the screw holes. How did this area of your body work out in the end? Did it help any? If so, I may try doing this in addition to the Shoe Goo/Drywall tape...
how did you stop the dry wall tape being visible on the outside? As soon as you put it on, you can see the squares through the paint
Great idea man came across your vid while looking for something else. Great job. Is the Flex Seal or bed liner material nitro resistant? Keep on keepin on
Sweet I gorilla taped my udr body n shoe goo some of the plastic washers onto it
Hows the body holding up?
I also used the gorilla tape idea holding good . I don't think the extra weight will effect this beast of a truck , it has so much torque I'm actually thinking of adding weight to calm this thing down. What do you guys think?
@ExocagedRC
6 жыл бұрын
If you add weight it would be best in the belly as low as possible.
I have a rustler and a 2wd slash and I was looking for something to add to my collection. I was originally looking at the xmaxx but that’s just a little too expensive for me right now. I went to my local hobby shop and saw the udr and I instantly fell in love with it. I just don’t know if it’s worth the money that it’s asking for. I want something that’s 4wd and that can take a beating. Is the udr a good choice for my next rc or should I wait for something else?
@ExocagedRC
6 жыл бұрын
I really like mine. The metal Front center driveshaft is a needed part but if you want more of a basher maybe look at the cheaper erevo 2.0.
Super pissed off with this body. Just bought the UDR and I haven't even had the body on for 5 rides. 3 screw holes are busted and there are 5 cracks around the front tires. I bought a clear body to paint thinking that is gonna be my basher, but I guess not. Guess I'll just have to spend another $110 on another body and make it weight 5lbs so it can last 2 runs. Some other company better come out with a body that is as sexy as this one, but way more sturdy. After all, I went broke buying this truck. Any suggestions on what I should do after I buy a new FOX body? (Cut off the back up to the cab?)
@ExocagedRC
3 жыл бұрын
buddy, these bodies just don't last, I did take off the bottom piece and I just let it flap and it doesn't seem to rip as much.
@project_rc
3 жыл бұрын
@@ExocagedRC Will try, but there are not cracks that attach the roof and surround the front wind shield hole. I could make a better body than this. THX for the help tho. 👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻👍🏻
Hey bud how did it hold up... thinking about doing this, wondering if it's worth the time?
@ExocagedRC
5 жыл бұрын
It’s doing good, still getting cracks and stuff but it’s still in one piece.
@Npizzola420187
5 жыл бұрын
@@ExocagedRC That's good to here, deff sounds like it's worth it to do..
How did that flex seal turn out compared to shoe goo!!
@ExocagedRC
6 жыл бұрын
Seemed to turn out well and is holding things in place good so far
Hey!, nice video! and did it work? i see the video is 1 years old.
@ExocagedRC
5 жыл бұрын
C T sorta yeah in the end the body still has some breaks but it has lasted a lot longer than the red body. It’s still on there in the recent UDR video.
@tmtbodies5990
5 жыл бұрын
Exocaged RC ok thanks ! I will do it then also ! Thanks for the answer and the video.
I'm late but proline has a body for it
I just bought a clear body . having a guy make a confederate flag sticker and a couple .08 stickers. And a couple beerspeed stickers. Its gonna be awesome
Anyone try stacking 2 bodies and gluing together with shoe gooo
@ExocagedRC
5 жыл бұрын
not me but that would be a $200+ body to even try, at least if they didn't fit you'd be able to put one up for later I guess
@ToGrimmToWin
5 жыл бұрын
Exocaged RC not if it’s a new truck then buy the clear one for 70 put it on the inside
Call RhinoShield! Never replace your body again, RhinoShield! Hey yay! 😆
dude, there is something way better then flex seal and waaaay better then that shoe gooo garbage. use the same drywall tape to reinforce all the weak areas then spray the whole inside with spray-on poly urethane truck bed liner. i got my slash used over a year ago and the body was already starting to crack and split in all the usual places that traxxas bodies do, i did the drywall tape bed liner thing and now with a year and several significant hard hits later the body is still holding up just fine, and what's nice about using bed liner is you only have to apply one coat so the drying time is considerably less plus you can probably do 8-10 bodies with one $10 can of bed liner....
@ExocagedRC
6 жыл бұрын
Great info thanks
@rugger8787
5 жыл бұрын
im going to paint my body with bed liner it might work
ah hello its vacuum formed, it will never be even all the way through. Should have use the old body and double layer the easy to rip areas instead of throwing it away
@ExocagedRC
5 жыл бұрын
yeah vacuum formed as they all are but some of this is paper thin and could have been made better.
You have no idea how bodies are made?!
get a Russian body like the one for the xmaxx if they don't do one it won't be long!
@ExocagedRC
6 жыл бұрын
Have they made a body for the UDR yet?
Would you rather have a steel body that dents all the time? Really guys if you didn't drive your trucks like idiots they wouldn't break.
@ExocagedRC
5 жыл бұрын
LoL on a scaler yes on this no. Crashes happen in the pursuit of fun. Plus who would watch a boring video of a truck that doesn’t do anything interesting?
@project_rc
3 жыл бұрын
I drive half throttle on a crazy track and my Fox shell lasted 3 runs buddy.
Lol what a piece of crap body, and how much are they? Down with proprietary companies like traxxas.
@ExocagedRC
6 жыл бұрын
the bodies are very nice, they just really messed up on thickness consistency.