Thanks for the informative review of your new radio transmitter. I am sure this review will help others to choose their new radio transmitter wisely.

@jjshobbypower9091

3 жыл бұрын

Thank you so much for watching. :)

useful information. and detailed explanation. Thank you..

@jjshobbypower9091

Жыл бұрын

Hello. Glad you found it useful. Thanks for tuning in!! 😊👍🏼

Thanks for your video!!!

@jjshobbypower9091

3 жыл бұрын

Thanks for the good product!! 😊👍🏼

@Radiolink_official

3 жыл бұрын

@@jjshobbypower9091 we will keep moving!

I know this is a two year old vid. But the blinkers in the front lights can be set to blink right when the rig go right and left when go left. All you need to do is to set it up from the button in the light system box. You might be knowing this now! But in case 😅 Love your channel and your rig 🫶🏼💪🏻💪🏻

@jjshobbypower9091

5 ай бұрын

Thanks for your support buddy! I also like your blacked out Defender, looks really cool. I know some lighting kits allow the Amber lights to work as turning indicators, but I didn't know I could do that to mine. Mine is the Traxxas lighting kit which come with light bar, dont think there is a light system box, as there is only a separate lighting module which I plugged directly into the receiver.

@rcjoy5362

5 ай бұрын

@@jjshobbypower9091 i have the same lighting system but the Pro scale, it comes with an extra piece so you can control the lighting functions directly from the phone in so many different ways, which is already connected to the remote control as well. 👍🏻 and thanks a lot for liking my Rig 🫶🏼

@jjshobbypower9091

5 ай бұрын

@rcjoy5362 ah, I see. I don't think mine is capable of doing so as my lighting kit is the original version. I don't mind the blinkers staying on all the time, as when you are crawling, you don't really use blinkers anyway. 😊👍🏼

So close to 1k

@jjshobbypower9091

7 ай бұрын

Yes indeed. Thank you so much for your support!! 😄😉👍🏼🙏🏼

Very NEIC..

@jjshobbypower9091

Жыл бұрын

Thank you very much my friend! Glad you like my TRX-4. It is a very good rig, and I can recommend it.

Just ordered this transmitter. Now all the videos on them pop up. Very happy they did :) Thanks. Love those wheels, what are they?

@jjshobbypower9091

2 жыл бұрын

Hey Jeff, you will like this transmitter as it is perfect for the TRX-4. The wheels are GMade SR02 steel wheels, the wheels are made of untreated steel so once you scratched them they will rust to give you that realistic effect. Here is the link to where I purchased them from: www.modelsport.co.uk/product/gmade-1.9-sr02-beadlock-wheels-2-matt-black--385478 😊👍🏼

@jeffparryncc1701

2 жыл бұрын

@@jjshobbypower9091 Very cool, thanks heaps.

Maybe u can try install servo winch on the front bumper servo mount, it's more torque to drag ur trx4 :D

@jjshobbypower9091

3 жыл бұрын

陳師兄，我都有噤唸過，不過唔知夠唔夠位，因為用個TRX-4 Defender 車殼車頭空間好有限。我都唔係成日會用個winch，所以佢都係用嚟做裝飾多啲。😅😊👍🏼

❤

I use a FlySky GT3B with hacked software, its now 8 channels, all buttons are programmable, i run lights on one channel, front servo winch on another, rear servo winch on another, i also have the Hobbywing Fusion 1800kv brushless motor in my TRX4, my radio gear is less than half the price of a RC6GS, has two more channels and better battery life. ST Visual Programmer software is free, a few £ or $ for the usb connector, 5 mins of work and you have a cheap reliable 8ch set up.

@jjshobbypower9091

Жыл бұрын

That is amazing! Looks like you have an awesome rig yourself too! I like your choice of electronics. What a beast my friend!

@TheRoadTaken

26 күн бұрын

Does your flysky gt3b support fpv?

Great video! I'm setting my Wild defender and replaced everything, including the motor (fusion Pro 2300Kv), receiver ( Radio Link R8FG) and replaced the differential servos as well as the shift servo for Reefs 55 mini servos. I have been watching your video to try and setup my servos and my RC6GS V3 controller. How can I setup the end points for the servos? I'm new to the Radio Link system and never had setup endpoints before and I already ripped one of my differential cables because I didn't start the car without the servo horns disconnected. Live and learn. Any help is appreciated. Thanks :)

@jjshobbypower9091

22 күн бұрын

@@perohijo thanks buddy, glad you like the video and find it useful. I never replace the differential or gear shift servos, so unfortunately I haven't figured out the end points for them, but someone must have posted a video on KZread explaining how to set them. I have no issue with the 3 micro servo, they are still working fine as we speak. I have however purchased the official Traxxas replacement differential cables just in case they break, but so far I'm still using the one that came with the TRX-4 Defender. The front and rear differential cables are of different length, so make sure you get the right one for the correct end. If I come across a video teaching how to set the end points, I will post another reply below this message. 😊👍🏻

Thanks for the video! Could you run a winch on Ch. 3?

@jjshobbypower9091

2 жыл бұрын

Thanks for tuning in. I did wonder if I could use channel 3 dial to control the winch before as it could mean I do not have to use the little remote control fob (one with A&B button), however, I think channel 3 might be fixed to activate the AVC, I don't know how to disable it as crawler doesn't go that fast to require AVC assist. Perhaps the solution might be using a different receiver which also provide 6 to 7 channel but without the AVC function. 😊👍🏼

@1Axis

2 жыл бұрын

@@jjshobbypower9091 Thanks for the reply ! I'm in the market for a transmitter under $100 and have it narrowed down to the 6 channel Flysky GT5 and Radiolink RC6GS v2. Just not sure which one to get. It's for my TRX4 with locking difs, 2 speed trans, lights, winch and sorta want something that will accommodate it all

Great view brother I have the fly sky that comes with red cat axe and I want to try the radio link for my rigs and what size motor do you have in the land rover thinking about the 550 hobby wing any ideas thanks again

@jjshobbypower9091

3 жыл бұрын

Thanks Brian, if you have the Gen 8 Axe, then the FlySky radio is already really capable, some people prefer that over the RadioLink RC6GS V2. Your RedCat Axe should already come with the HobbyWing Axe 540 motor which support the slow steady crawl. The one I have installed in my TRX-4 Defender is a HobbyWing Fusion 2in1 motor, it has two versions - 1800kv or 1200kv. The motor is 540 spec but it has a ESC built in to the back of the motor, hence the overall length is 550. You will be able to find a bit more information here: www.modelsport.co.uk/product/1331797 Hope this helps! 😊👍🏼

@davisbrian2912

3 жыл бұрын

@@jjshobbypower9091 yes thank you for the info the red cat was built by a friend of mine metal is every were and it's heavy did not come with electronics had to put my own has a Holmes 550 21t torque expert in it now I have the fusion in my traxxas sport just did not have a lot of insite on the 550 hobby wing thanks again brother

@jjshobbypower9091

3 жыл бұрын

@@davisbrian2912 you are welcome. If you have any other questions just let me know, I will do my best to assist you. 😊👍🏼

It would have been nice if you posted the links for the accessories.

@jjshobbypower9091

8 ай бұрын

Thanks for tuning in. I actually have posted the links in my other video before this one, but here is the link to my other video, you will find all the links below the video descriptions. kzread.info/dash/bejne/d4iEq6OqoLa-qKQ.htmlsi=ZqodnsHn54_BUMkM

Do you miss the traxxas link app great video btw

@jjshobbypower9091

Жыл бұрын

Hi there, no i don't miss the Traxxas Link app as I have never used it before, it is great for playing around the settings but not very in depth so I never bothered. The RadioLink settings are a lot more customisable. 😊👍🏻

Hi. It’s been a while but can’t get the 2 speed to stay on. Just goes on them off.

@jjshobbypower9091

11 ай бұрын

Hello! Just want to check you have the same set of numbers as shown at 13mins 00sec in the video? It should work if you follow those numbers according to the channels. Normally, people have issues setting the cruise control only as it requires installing an update on the software for the remote comptroller, but I don't recall setting the high and low speed would require the software update. I know exactly what you mean by the 2nd speed only come on when the button is pressed, as soon as you let go of the button it would go back to low speed. Definitely it is something to do with the figure setting for the 2 speed engagement. Try and copy the exact figures in the video at 13mins00sec and it should work. Let me know how you get on. 👍🏼🤞🏼

How did you set up your speed controller? What channels did you use to get ur throttle to work I’m having issues with mine currently

@jjshobbypower9091

7 ай бұрын

Hi, thanks for tuning in. If you watch the video around 13 minutes on, try and copy all of those preset values on the screen, and it should work for you too. If your transmitter is V2, then you might need to update the software first. Let me know how you get on. 😊👍🏼

hey how did you make your 2 speed to work on that button that lights up? When i press mine, it disengages right away and in order for me to switch gears, I have to hold it in :(

@jjshobbypower9091

2 жыл бұрын

Hey buddy, thanks for watching the video. If you watch the video around 13minutes on, try and copy all of those preset values on the screen and it should work for you too. Let me know how you get on. 😊👍🏼

@erickmendoza4324

2 жыл бұрын

Hey so what swtting in the menu did you go to and change those values?

@jjshobbypower9091

2 жыл бұрын

@@erickmendoza4324 you have to press "Exit" and "Enter" at the same time and it will bring up a new menu, then you type in those value as shown on my video. Hopefully you will find it. 😊👍🏻

@nurksmurf7167

6 ай бұрын

In the AUX-CH-menu - change "SwD" to "LK-D"

Hey i wanna ask. If i bought it and install for the first time. Is it work for micro servo trx4 like traxxas tqi or i must setup the transmiter first? Also is it possible to broke micro servo if i use it without setup?

@jjshobbypower9091

Жыл бұрын

Hello, thanks for tuning in. Yes, you just need to plug the two micro servos into the receiver and it should work right away. I would recommend you to complete the initial set up first, as you don't want to give the micro servos too much twisting (stress) on the springs and risk damaging them. Hope this helps! 😊👍🏼

@Rayradityaa

Жыл бұрын

@@jjshobbypower9091 allright thanks friend So for the first instalation i need to put lock diff mode on both servo and install the receiver right?

@jjshobbypower9091

Жыл бұрын

@@Rayradityaayou are welcome! Actually, you don't need to set the two micro servos to lock/unlock positions. I forgot they both have servo saver (spring coil) so will be more forgiven if you don't get it right the first time. Just plug all three servos into the new receiver, then follow the preset values as shown on the handset at 13mins (13:00) of the video and it should be fine. 😊👍🏻

@Rayradityaa

Жыл бұрын

@@jjshobbypower9091 thank you. And yes i follow your setup after i order rc6. 🙏

@jjshobbypower9091

Жыл бұрын

@@Rayradityaa nice!! Enjoy your TRX-4!! 😊👍🏻

Can I set up my avc knob to control my winch? Thanks in advance!

@jjshobbypower9091

2 жыл бұрын

Hello there, I have tried using the AVC knob for controlling the winch but with no luck. Guess it was set by default to pair with the receiver's gyro. If you really want to get control of your winch from your radio controller then try the Spektrum DX5 Rugged, I have tried and it works. Hope this help buddy. 😊👍🏼

@five-omtb7536

2 жыл бұрын

@@jjshobbypower9091 Can not run a winch from the radio on a DX5 without sacrificing a locker switch or transmission switch. Radio is only a 5 channel. You have steering, throttle and only 3 other auxiliary switches. Those take up front and rear independent lockers and 2 speed for the transmission.

Does the receiver have a built in Gyro? How do you get the auto steering to work as far as hardware goes?

@jjshobbypower9091

2 жыл бұрын

Hi there, yes, the receiver has built in gyro. The Fusion motor and the servo are plugged into the receiver, so the receiver would send signal to servo to counter steer. It is mainly for fast moving vehicles like a buggy, or track cars, on a crawler I don't think it is that useful, unless you put on a 3S battery to make it go faster, but honestly, you don't really need it, maybe when you are down hilling it might helps a little bit when your rig starts to slide forward and sideway. 😊👍🏼

@P_double_H

2 жыл бұрын

@@jjshobbypower9091 thanks for the answer. I just ordered one of these radio / receiver combos.. it's the v3 so we'll see how it works when it arrives. Thanks

@jjshobbypower9091

2 жыл бұрын

@@P_double_H oh nice! I'm sure you will enjoy it. The V3 looks exactly the same as V2, only difference I can see is the display font and layout is slightly different and the V3 is now supporting upto 8s. 😊👍🏼

I need this at india market..

@jjshobbypower9091

Жыл бұрын

Indeed, I'm sure a lot of people would like that, and could form a big team there. 😊👍🏻

How did you get your light hooked up after you removed the esc to brushless

@jjshobbypower9091

Жыл бұрын

Hello there, thanks for tuning in. I plugged my lighting kit directly to the spare slot on the RadioLink R7FG Receiver. 😊👍🏻

@edgarmuro7790

Жыл бұрын

@@jjshobbypower9091 you can connect light module to it thanks for info I’m looking to get this transmitter can you use multiple receivers that way I don’t have to buy 2 of them I want it for my other trx4 I have 2

@jjshobbypower9091

Жыл бұрын

@edgar muro that's right, the TRX-4 lighting kit comes with a 3in1 lighting module, you can plug that lighting module directly to the receiver. Yes, this controller can control multiple rigs, you just need to buy the extra receivers. Alternatively, you could also use the Spektrum DX5 Rugged, it is also capable of controlling multiple rigs with their specific receivers. Good luck!! 😊👍🏼

@edgarmuro7790

Жыл бұрын

Ohh thanks man for info I think I’m going to order one of this I actually like the rugged but it’s a little to pricey lol

@jjshobbypower9091

Жыл бұрын

@edgar muro you are welcome! Yes, I agree the Spektrum products are quite pricy. I have both controllers, I use the RadioLink for my TRX-4 and GMade Komodo, and I use the DX5 Rugged with my Axial Ryft simply because the Ryft flick up a lot of water, sand and mud. 😅😊👍🏼

How do you get the high low gear to be a toggle I have to hold mine even when I put in the values you did

@jjshobbypower9091

2 жыл бұрын

It should work if you use the exact same values as I have shown in the video, otherwise, check your receiver connections, make sure things are plugged into the correct channels. 😊👍🏼

@HairBandDan

2 жыл бұрын

@@jjshobbypower9091 you have to put LKA on the channel you want to use to get it to stay

@jjshobbypower9091

2 жыл бұрын

@@HairBandDan LKA?

@HairBandDan

2 жыл бұрын

@@jjshobbypower9091 it’s on the six channel set up I changed it from saying swa to LKA, and it worked at a toggle switch

@jjshobbypower9091

2 жыл бұрын

@@HairBandDan ah.. perfect, glad you managed to get it working! Enjoy the new controlling of tree crawler! It is amazing! 😊👍🏼

Hey bro 😎 I have a question for you.I have the RocHobby MB 1941 1/6 SCALE US MILITARY And the remote control doesn’t work anymore:( this control the you have can work for that ?

@jjshobbypower9091

2 жыл бұрын

Hello.. nice Jeep you got there..😊👍🏼 I'm pretty sure the controller will work for your Jeep also as the transmitter also comes with a receiver, so you just need to swap out your existing receiver and job done. Your Jeep won't crawl like mine though as I have also changed out the motor and ESC. Hope this helps! 😊👍🏼

@1960valdivia

2 жыл бұрын

@@jjshobbypower9091 Big thanks man 😃

@jjshobbypower9091

2 жыл бұрын

@@1960valdivia no problem at all, you are welcome buddy. Let me know if you have any further questions. Im always here to help. 😊👍🏼

@1960valdivia

2 жыл бұрын

@@jjshobbypower9091 Thanks again man :) i got the new redio transmiter the same model as you but i have a macbook air and i try to donwload the firware for the remote and it is just for window :( do you know another opcion >>> sorry for my english bro

@jjshobbypower9091

2 жыл бұрын

@@1960valdivia hey Nelson, I had the exact same problem as you before, at the time of this video I was using a Macbook Pro mainly and I had to borrow my partner's Windows laptop to do the firmware upgrade. It is a bit annoying for us, do you have a family member or friend who has a Windows laptop? It would only take a couple of minutes. 😊🤞🏼

Have cruise control?

@jjshobbypower9091

3 жыл бұрын

Yes, the Traxxas transmitter which came with the TRX-4 has that function, same with this new RadioLink RC6GS v2. 😊👍🏼

@syahmihobby8963

3 жыл бұрын

@@jjshobbypower9091 thanks man.. that radiolink can control the cruise control speed low to high right?

@jjshobbypower9091

3 жыл бұрын

@@syahmihobby8963 that's right. The circular chrome button behind the trigger is for cruise control. You can set it from 0% to 100%, but my TRX-4 will not move below 8% so I have set mine to about 9% in the video to show the slowest crawl speed. I can set it from 9% to 100% full speed. I know it works on the RC6GS v2, but I think it also work with RC6GS v1. Just so you know, straight out of the box it might not work as it requires a firmware update, but it is easy, you just need to plug the transmitter to your computer via a micro USB cable. I learnt it from a KZread video, let me find it for you.

@syahmihobby8963

3 жыл бұрын

@@jjshobbypower9091 clear n best advise from u man.. i will using this for my defender too.. ( done subscribe ur channel tu )

@jjshobbypower9091

3 жыл бұрын

@@syahmihobby8963 no problem mate, you are welcome. We are here to help each others. Here is the link: kzread.info/dash/bejne/iKemxZetXavLmrA.html For me, when I tried with my work laptop it wouldn't work, but my personal laptop works fine. 😊👍🏼

A nice set of tires ,foams and wheels no more to need for a good performance. All this heavy weights are useless if you go extreme climbings.Lightweight is the way to go . Have you ever seen someone ad weight to his 1:1 Defender ? Ha ha.

@jjshobbypower9091

2 жыл бұрын

You have a point, but a 1:1 Defender is already made of metal so it has already contribute to the weight. TRX-4 is made of plastic, you don't see people changing a 1:1 Defender to fibre glass or carbon fiber to make it lighter. It is all down to personal preference and individuals driving style. I do get your point though, lighter rig often get over obstacles easier. 😊👍🏼

Get a 2021 Bronco chassis

@jjshobbypower9091

3 жыл бұрын

The 2021 Bronco chassis is almost identical to the Defender chassis as it has the same wheelbase, both have lock/unlock differentials and 2 speed. Only difference is the fenders has slot for the new Bronco body to clip in as well as the front and rear bumper mounts are a little different. Im sure you will love the new Bronco as I also think it looks amazing, but I have my heart set on the Defender as I like old school. 😄👍🏼

@odys3803

3 жыл бұрын

@@jjshobbypower9091 I have the defender, the bronco is smaller so it has better center if gravity. I didn't wrote Bronco body, because the body itself wouldn't fit to other TRX4 model, because it has custom fenders, bumpers and rock sliders. In my opinion its the best looking stock body possibly on the market,

@jjshobbypower9091

3 жыл бұрын

@@odys3803 you are right, there is no doubt about the new Bronco body would have better centre of gravity comparing to the Defender. As I said previously, the Bronco has a lovely body and for Traxxas to decide to make smaller bumpers and the new body there is no doubt the new version is going to perform better than the Defender when both rigs are straight out of the box. It is too similar to the previous model so I don't be investing in one as I have already got a Defender and a TRX-4 Sport in kit form. Im for those who have invested in the new 2021 Bronco they are going to love their rigs to bits. 😊👍🏼

@odys3803

3 жыл бұрын

@@jjshobbypower9091 Well the title of the video is how to get the most out of your rig. Answer, get the 2021 Bronco.

@jjshobbypower9091

3 жыл бұрын

@@odys3803 😄🤣😄 I guess you could say that..