** If your tackstrip pokes through so that you feel the nails, take a regular hammer and pound along the tackstrip (after it's all installed) and fold the tacks towards the tile. (should still be hooked into the carpet) then fluff it back up with your hand and good to go.

Awesome video! I’m a tile contractor and I’m tired of carpet strips. This will be the only way I do it from now on. Thanks man!

What a great informative video! Exactly what I needed to learn. Thanks!

Thank you for sharing this video. I have learned a lot from you. Genius!

Recommendations for any specific construction adhesive to use on the new tac strip? I have a no-cut/no drill high tension concrete slab and need to pull up about 50% of the carpet to replace a worn area with tile.

my issue is that the nails go through the carpet and have gotten my kids and me on our feet what can I use to cover the edge and my floor edge curves?

@chrissheafer

Жыл бұрын

Duhhhhhh....hammer the pins down.

This is the one I was looking for to transition to LVP from our bedrooms. Great video! Thank you.

Nailed it. Pun intended. This is exactly my situation. Video is a huge help. Thanks.

I have a master bathroom (Tiled) in the master bedroom (Carpet). I would like to be able to lay a new floor (laminate planks) over the bathroom Tile. Because I am removing the carpet in the bedroom and laying the Laminate flooring, I am uncertain if there is a possible way to transition from the bedroom( carpet being removed) and the bathroom/closet ( laminate on top of existing tile in bathroom.

Thank you. I’m installing laminate flooring and will need to transition to our existing carpet. My question is where in the door jam is suitable for the transition - either good to carpet or a transition strip? Thank you in advance.

@CarpetExpertBlueprint

4 жыл бұрын

Thanks for connecting!! If possible have the transition point be directly under the closed door

Would this be the way to deal with a scenario where a portion of existing carpet needs to be removed in order to add a tile section for in front of a sliding door?

Nice. Thanks! Perfect for a transition repair I need to do.

@CarpetExpertBlueprint

4 жыл бұрын

Awesome thanks for checking it out and glad it helped!

Can you feel the tack strip when you step on it?

Can you add a transition bar? Our carpet has been installed just how you’ve done it in the video but I’d like there to be a transition bar

this is absolutely the best video on the Internet for this subject.

@jaimemontes1429

4 ай бұрын

Hahahahaha hahahahaha

Can you use the same process with vinyl tile, if you smoothly cut off the click edge? Or do you think just using T-moulding is best? Thank you.

@cjeanjarvi

3 жыл бұрын

my Q also - guess he's not resonding here,

Tile guy did not put the A100 trim at my barhroom doorway . Went straight from tile to carpet. Now carper is frayed and i have nothing to tuck it under bc no trim. Any suggestions?

@Jeremycasteen-mh1bj

8 ай бұрын

Other than removing tile at doorway and add the strip like it shldve been???? Dont wanna demo any tile if i dont have to

Need something that is more protective of the edge. This is fine until the pets and vacuum cleaner hit the edge of the carpet. Will look further for threshold coverings.

@stevehamman4465

2 жыл бұрын

The tile had a schluter edge piece!! When tucking to tile or any hard surface you should double strip and use a sealer on the carpet edge before tucking it !! It will keep the rug from fraying.!

@carlclark1689

2 жыл бұрын

This will not last! He should have put z-bar down with the tack strip. Invisible and holds down the carpet. Professional!

What should I do to fix tac strip that pokes through carpet? They laid down trim where the carpet Mets the tile but we get poked by the tac strip

How do I translation to vinyl and I need to start the vinyl on the edge of the transition side. Any help?

How do you tuck a curve tile to carpet transition?

How would you transition 18mm rubber gym flooring to carpet that is 7/16" on a concrete floor?

Last nail popped up

How do I take carpet out of a closet and keep my room carpet. I think it's a transition. I want to end up with no carpet in my closet.thank you

Exacccctly what I needed. Thanks 🤙🏽

Great video solving my exact problem! 🎉🎉

Try a slam bar and an actual carpet stretcher

What if the tile was cut too short how can I fix it under the door frame

I'm, trying to put tile to connect with my old carpet my tile already have a thick pad underneath but I don't want to have the strip to connect the two together. In my living room from the front door to the hallway

What if there is not a strip of extra carpet?

So what is the gap size between the tile and strip to tuck?

@stevehamman4465

2 жыл бұрын

Quarter inch or your finger tip!

My construction guy put tile in my bathroom and now the tile is about an inch higher than the adjoining carpet what do I do?

Where do you get the tool to stretch the carpet

@Dj_Matic

2 жыл бұрын

It is called a carpet kicker or carpet stretcher and can be found at almost all box stores that sell flooring. I would always recommend to check FB marketplace if no luck; Harbor Freight Tools.

How do I replace carpet and tile combo to hardwood one level: so I have to remove the tile ? How do I get the floors level? For the hardwood?

What did you tuck that in on tile side?

The left side tack strip is loose, the nails didn’t hold! Boooooom

Nicely done!

I get a piece of 1x4 and put on the tile......in case i miss the nail.

🎉 nice job

Yes I have a question I want to transition my old carpet into a new vinyl floor and that's what this video was supposed to be about but it's not you have all new flooring that's easy

@Dj_Matic

2 жыл бұрын

You would need something called a transition threshold. Often referred to as "Schluter-Strip" However, Schluter is just a brand name. Much like people call tounge/groove vinyl flooring "Pergo" (which of course is also just a brand name)

Great vid and explanation

Very helpful. I sell flooring. Best video I've seen so far

Nicely done.

Wy a Hook knife that's not for carpet that's for vinyl that means your not a carpet installer

Carpet fitting videos 👉 kzread.info/dash/bejne/qI6i1rKYZba-e6g.html

thanks Fix It Felix!

The reason the edge lifted is because you left a small piece of mortar in the middle.

So that's obviously not old carpet so this video doesn't help me

This is not old carpet what the hell

Mal trabajo buuuu.no saben