Dont get me wrong with this comment . Its awesome the power these modern cars engines produce but there is still nothing like the sound of a old school naturally aspirated engine. With a big cam and full exhaust.

@exploranator

2 жыл бұрын

A Challenger SRT 392, to me, just BEGS to be built as a rev-crazy monster.

@keithmenzer6454

2 жыл бұрын

I too was disappointed that they chose a small cam and boost, rather than all out NA

Nice seeing Young people working these days and they did a awesome job building that hemi , I always watch powernation with pat and mike , if I ever wanted a engine built I would let them build it .

@razoreyes45k

2 жыл бұрын

There was one student. The other techs are SAM Instructors.

Finally! 7:00 "Once reaching the first click on the wrench, STOP" It drives me crazy when someone double clicks the torque wrench. I got my rear end handed to me by our instructor for doing the double click thing. His reason was twofold. First accuracy and because of the reason I gave him that I wanted to make sure I actually got it to click the first time he chewed on me for not having any confidence in myself.

@BruceLee-xn3nn

Жыл бұрын

Who's your instructor, is he a top engine builder or not?

@jeremylakenes6859

Жыл бұрын

Two clicks, I don’t care what you or any instructor or pro thinks.

Hope the RPM act gets passed to protect our sport and parts

@ericharman2159

2 жыл бұрын

You live in California,

@busterc6600

6 ай бұрын

😂😂😂 Maxine, Pelosi

Stroked and blown lol

@danorlando3503

3 жыл бұрын

This is how I'm trying to live life 😂😂😂

They spent $4000 on rocker arms but went with an Edelbrock SC instead of a Whipple? That beast can do a lot more than 780hp. They built a helluva engine, it's just bottle necked.

@maddawgnoll

4 ай бұрын

Most likely a sponsorship (free) part

Ah, love the sweet roar of a Hemi in the morning.

This video sure opened me up to how great theses engines can be🏁

I LOVE IT!!!! THANK YOU TO EVERYONE INVOLVED IN THIS ENGINE BUILD!!!! A TOTALLY AWESOME DAILY DRIVER MOTOR!!!! A GREAT JOB BY EVERYONE!!!!

Those cylinder head are way overkill for the cam there using. And the”Race only supercharger” can only max at 700hp why not put a Whipple over 1000 easy 1200 on race gas.

@vincentleviangelomagbojos5241

3 жыл бұрын

Because they build it to last. Not just for fun over the weekend

@RandomTechWZ

3 жыл бұрын

Because I’m sure edelbrock supplies the supercharger for free.

@Brayan-rm6ti

2 жыл бұрын

Its not really a overkill cause then again its a 7liter stroker it breaths way more air

@kskip4242

2 жыл бұрын

Who really needs more than 700hp on the street? Hell 500 is sufficient for a fun street car as long as you have the torque to back it up.

@chrishall5508

Жыл бұрын

Seriously though that blowers going to make 8lbs of boost on the smallest pulley with those heads 😂

Excellent engine build! At the end of the video, notice that hemi valve covers are selling for $1000 and you can get aftermarket cylinder heads for a small block Chevy for $600… I see that it’s still more expensive to build mopar Hemi…

@markoz673bajen8

3 жыл бұрын

Mopar mopower baby

@danmyers9372

3 жыл бұрын

@@markoz673bajen8 - That engine is weak. 780 HP out of a 426ci engine with ported heads, cams and a blower pushing 8+ pounds on race gas? 🤣🤣🤣. A bone stock 300ci Coyote with oil pump gears only can easily make 800+ HP with a good blower.

@antilaw9911

3 жыл бұрын

@@danmyers9372 lets see it

@frankmc5112

3 жыл бұрын

@@antilaw9911 That's true. Ford Modular 4Vs make that power and they are 4.6l. 2003 Cobra with a Whipple blower swap on E85 makes that. That's a lot of money for that engine to only make nearly 800 hp. The new Coyote's can do that power on pump gas. Check out Whipple's site.

@2K-Tan

2 жыл бұрын

@@frankmc5112 Yeah and all Coyote's sound like shit. So I'll spend a bit more on a Hemi and enjoy the soundtrack. But that's just me. A Coyote is also an DOHC, 32 V completely modern V8 with direct and port injection. The DOHC setup gives it quite the breathing advantage over an old school pushrod engine like an LS or Hemi. The Modular 4V's ain't bad but I'd still rather have an LS or Hemi. Just never been a Ford guy I guess. I'd take a Boss 302 or a 5.0 HO anyday of the week though. Legendary.

That edelbrock supercharger is grossly undersized for this combo. Hands down the limiting factor in this situation. A 3+ liter whipple would be way better for heads that flow that much.

I wish this school was available when I was young. I would have thrived in an environment like this.

What an awesome video. Thx for sharing.

I love seeing young kids into this industry. Its amazing. My kids see me working crazy long hours yet they only care about tik tok, xbox, etc. They have dirt bikes and quads (they are 9,6, and about a yr n a half. Not talkong about the baby obviously lol) i wish they would get tf outside!

@thejunkmanlives

3 жыл бұрын

you are the parent. you have direct influence over this. get tf outside? well, u need to take them.

@theeoddments960

3 жыл бұрын

You need to give them some direction. Kids can be productive too

@thejunkmanlives

3 жыл бұрын

@Justin Schooler you need to teach them that it is a tool(an extremely powerful one) and how to use it. if they are young enough u can throttle down how much of it they use and again teach them how to use it. they need to understand that most of social media is phony. but again this goes with my first post. YOU are the parent. YOU set the standard.

@thejunkmanlives

3 жыл бұрын

@Justin Schooler when i deal with kids on a daily basis, and these same kids talk to me before their parents i think i can easily speak on the subject. the trick is you need to be informed on their world. when my aunt just recently started using youtube she is not equipped to deal with her grandkids internet usage. but when i know what streamer the kid watches and what games he plays he is less hesitant to listen to me cause he knows i understand what hes dealing with which makes it easier for me to steer him in terms of content and usage. when i tell him something is phony hes more likely to say "ok he knows about this stuff" instead of "hes old he doesnt understand". again, its about effort.

@guardrail2897

2 жыл бұрын

I tried to get my stepson to go out with me fishing and hunting when he was younger. All he wanted to do was play video games. Now he's out of school and works at Sheetz convenience store still playing video games. He doesn't want anything out of life. My wife babies him way too much. And now her daughter is the exact same way.

Now just need to drop that in my Midnite express pick up

2:42 young Pat Topolinski 👋😁

K1 crank and rods, wiseco coated skirt piston, Jesel rockers, American racing 3.5in collector headers. This is a big money build.

Wow one of the best over the top episodes yet ! Heart and soul! Thanks!

Dodge did it with a 6.1 motor at 707 hp. A good tune and good exhaust made about 800 hp from a factory motor.

@scottengle1987

Жыл бұрын

The Hellephant is 426CID and makes 1000hp.

I would like to see yaa'll build a 270 hemi from the 50's with modern improvements!

@randyrobey5643

2 жыл бұрын

This would be fun, but there are reportedly few aftermarket speed parts for those early Dodge Hemi engines. (I still gave you a thumbs up.)

Awesome great job guys!

Congrats on the ONE MILLION mark. 🎉

We all win thanks to the school . Because all the men &women coming out as pro's and building great stuff. For all of us 👍👍👍

Those serpentine belts are floating, flopping & slapping.

@austinfouts9139

3 жыл бұрын

The tensioners aren't strong enough lol

That would be so sweet sitting in my 2012 Ram!

Would love to see a converted fuel injection with morden real ivory and more instant pedal response for street use with out vapor lockup. Or summer heat driving issues.

@jesse111487

2 жыл бұрын

Me too

People comparing this to hellcats and demons prob havent realized how old this build is

Good to see an oil pan gasket installed clean and dry...

Where is Mike Galley now?

Opps. The depth of the oil pan pickup was wrong. He used one gasket width as a measurement then used 2 gaskets and a windage tray between the block and the oil pan.

@waltnickerson4598

3 жыл бұрын

@@bigboreracing356 Yep. If I remember the engine was tested to 6500 rpm. not as you say 9000+rpm... I agree with you. In the video they pointed out this adjustment then almost tripled the gasket thickness. I do not think it would make any difference on a 6500 rpm engine but I wonder if it is that critical on a 9000+ rpm engine?

@Brayan-rm6ti

2 жыл бұрын

@@bigboreracing356 and they aint getting to 9k rpms lol it dosent need to rev that high for hp itll get 1000hp rght around 7kish

I love to drive by and set off Tesla car alarms with this beautiful hemi exhaust note

[Trackhawk has entered the chat] "VVRRROOOOOOOOMM'AAHHH!!!" [Trackhawk has left the chat]

I would love to have access to the tools, parts and expertise in this shop. Sure makes wrenching look easy peasy.

Extra cool to see these kids think and do! Salute!

Hemi!!!!

HEEEEE. Let's drop that into an oddball. '72 Gremlin X😂

@tenthousanddays2103

3 жыл бұрын

Bohemian Rhapsody.

@theeoddments960

3 жыл бұрын

@@tenthousanddays2103 ?

@tenthousanddays2103

3 жыл бұрын

@@theeoddments960 Movie ref: Wayne's World. they're singing Bohemian Rhapsody by Queen while cruising in a Gremlin. The scene is a classic.

@theeoddments960

3 жыл бұрын

@@tenthousanddays2103 what a strange thing to say that was an amc pacer not a gremlin

@tenthousanddays2103

3 жыл бұрын

@@theeoddments960 Ok Karen.

That's pretty decent results. Built to live and a last.

@blanchae

3 жыл бұрын

@@bigboreracing356 Good to know

@razoreyes45k

2 жыл бұрын

@@bigboreracing356 My 1975 318 had it's rebuild after 44 years. Maybe this modern Mopar will outlive you....

@razoreyes45k

2 жыл бұрын

@@bigboreracing356 You just stated my point smart guy. BTW, there are tools still in use from the Henry Ford days. You think machines become useless? I'd like to see you build an engine comparable to the one on this video and explain it's build up. Maybe we can all see your mechanical expertise.

I’m gonna catch a lot of hell for saying this, but while this 426 is making decent power, 780hp is a disappointing number for what this combo is. Stock 6.4 hemis with a supercharger have been proven to make 800+ hp. That combo could make 1000+ reliably if it had a bigger cam to match the cylinder heads. Stock gen iii heads flow better than any stock LS or Coyote heads, which can support over 1000hp with boost. A bigger cam ground for a boost and more boost would turn that thing into an LS and Coyote killer. However, I’m not gonna let that take away from the fact that it was assembled very very well and I bet it’ll run forever like that

@kurtpoblenz2741

3 жыл бұрын

I think they reached the limits of the particular blower they were using. The head flow is there to make more power.

@rabenracing6093

3 жыл бұрын

@@kurtpoblenz2741 very true. The Edelbrock superchargers are perfect for street builds which is what they were shooting for. With a whipple that thing would scream

Thats extreme power for such docile idle

@kskip4242

2 жыл бұрын

mild cam, strong conpression ratio with mild boost.

Who murdered that intake valve guide

650 hp on 3 psi of boost is crazy on that 426

Sorry Jud. Their is such thing as an LS with aluminum block with reverse flow 2 valve per cylinder heads. Hemi cast iron block two spark plugs per cylinder with 6 bolt mains and cross flow heads 2 valve per cylinder with dual rocker shafts for more valve support higher RPM. Ford has overhead cams aluminum block with cross flow heads 4 valves per cylinder.

“FEED THE OIL TO THE LIPTER GALLEY” got it sir📝

This does give me some really irresponsible ideas for my 6.1 Chrysler! 750 HP might be a little bit over the top for a street build, but around 500 sounds just about right 😁

Biggest engine I've ever seen in person was a 927ci v8 in a drag car, that sucker was nuts, i watched him run the 1/8 but on that strip he couldnt put all his power down

Congrats for 1mil

I’ve been doing this since the 80s I train my daughter and she’s a Mopar girl just check out the videos 😁👍

I need that engine for my 2013 charger pursuit!

Makes me respect dodges effort just a little more

Build them bad and keep them badass 🐱🐱👍😎hell ya!!!

Interesting video. I guess this video was taped about a decade ago since I recognize those students from back then.

The extinct elephant lives again!

"Stroked and blown" Nice

Man makes me wanna do something with ith my stock 2015 Colorado 3.6 it makes feel like I'm the but of every joke lol maybe a 6.6 V8 should fit it

The perfect Hemi

The Helliphant

Was it me or was that power kinda low 780 on race gas? that means 660 to the wheels and you would need race gas ? I have seen coyotes make 650 on pump and ls make 650 on pump

@danmyers9372

3 жыл бұрын

Not just you, that’s weak given everything in it. A bone stock Coyote with oil pump gears only can EASILY make 700+ on pump gas with a good blower. 800+ on race gas or E85.

@kirbywinters1291

2 жыл бұрын

Seems like getting a hellcat engine would be better bang for buck won’t take muck to make 800+ with it on 93 octane

Did you have to remove the piston squirters in order for that stroker kid to work?

Christ, i wasn't aware the target demo was so low quality, an explanation how to use a torque wrench was necessary

Hello from down under. Love the videos.

@Brayan-rm6ti

2 жыл бұрын

Austraila?

Is that really a good result from a 427 with a supercharger and race gas?

@denniswatkins4666

3 жыл бұрын

For the boost level their running yes. But that motor has parts in it they could throw twice that or more!

@Ausblack

3 жыл бұрын

@@denniswatkins4666 if I paid for that motor to be built, I would be very disappointed

@sepg5084

3 жыл бұрын

@@Ausblack it depends on long do you want your motor to last between rebuilds and how the motor will be used. They put a supercharger rated for 700+hp, they could have gotten more if they put a bigger supercharger on it.

@baby-sharkgto4902

3 жыл бұрын

@@Ausblack you don't know what you are seeing. The engine has a small cam and they are only making 8-psi of boost. Clearly not a max effort. This engine could handle 20-psi easily and be making 1200hp.

@Ausblack

3 жыл бұрын

@@baby-sharkgto4902 I'll take a Ford barra any day of the week over this boat anchor. For $12k I can have a motor that will pump out 1000hp for years

how would I want one of those for my Dodge Ram. 2012 sport I have it in my parking lot why? the cranksh was ruined just by knowing how to change it myself what a good job they did I congratulate you 😊😊😊

Nice valve covers at the end.....starting around 1k? Holy shit batman!

I'm sure its a great learning lesson for this student and maybe the engine costs less than a Hellephant but at the same displacement, the Hellephant is still making 1000hp....

Nice! And I'm not even a Chrysler kind of guy.

what hemi was that 4 seconds into the video was that on your channel or was t not videoed

If they pulled that supercharger off and put a decent cam it would make the power na. Put a Whipple on it than let it eat...1200hp on pump it will do.

@youtubestolemyhandle1

3 жыл бұрын

Yoda

6 bolt mains? Looks like 2 bolt studs with 2 cross bolts. ?

If you’ve been to trades school. You know that kid 😂😂😂😂

What's the tick down at idle? Valvetrain? Sounds almost like spark knock but it goes away off idle.

How much did this all cost??? Part #'s for all parts used?

@JerkVegas86

3 жыл бұрын

Atleast 15k

Man, what would I have to do to go to that school 🤔

@DerekHen

3 жыл бұрын

Not much, it’s easy to get in. I’m a student right now, if you can pass a simple mechanics test, you’ll fit right in.

@allanb3222

3 жыл бұрын

Be able to pay the tuition fees, depending on the program you want to train in.

@Hammerback0

3 жыл бұрын

@@DerekHen Derek, can u make me an appointment with Kims guts? I'm willing to drill and tap.

@1982MCI

3 жыл бұрын

@@DerekHen where is the school located at and how long are the courses typically? Thanks Derek?

@DerekHen

3 жыл бұрын

@@1982MCI located in Houston, Tx. Block and head class are both 9 months each and then EFI and CNC are about 7 months each.

6 bolt mains? I only saw 4 as he was putting on the windage tray. ??

@1982MCI

3 жыл бұрын

The other two come in thru the side of the block, one on each side and are external bolts so you wouldn’t see them under the windage tray

@seniorrider9337

3 жыл бұрын

@@1982MCI Two on the sides of the block plus two on the main bearing caps is what I saw. Where are the other two? Shouldn't there be 4 bolts on the main caps and two on the sides of the block feeding into the caps. I think it was a mistake in the narrative. This is a 4 bolt, not a 6 bolt. How many bolts do you see on the main caps?

I'd love to see something like this but for a 68 440 from a charger rt

Hellcats have been out since 2015, how does a 426 with a bigger blower on race gas make less power?

Nice build! Did you happen to use OR plug the cylinder oil squirters in this build?

Should have done a naturally aspirated 426 stroker

I wish someone would make a detailed step by step on stroking a 6.1 into a 426

@rickgehring7507

2 жыл бұрын

working on one now.

Great job. What kind of torque wrench is that?

I’m pretty sure he said that was a 6 bolt main. But why am I only counting 4??

Nice commercial for that school

I would have preferred to see a NA street build

Not bad at all! Still makes less than a stock 6.2l hellcat redeye engine though

It’s a junior Hellcat!

@Brayan-rm6ti

2 жыл бұрын

Nope the hellcat is the junior compare to this 7liter hemi😂 with a better blower and reving it to 7k rpms would pass 1000hp easy

It's funny the block says 6.1L but it's pretty much 7.0L

@captainboose8788

3 жыл бұрын

Yeah, the 6.1 is one of, if not the best production Gen 3

So, the redeye is 6.2L and makes over 800hp. With 7L, this really should have gone past the 800hp level. I suppose the boost level is higher with the redeye, but if I was building a 426, I would be aiming for 900, especially since the hellephant is 1,000+. If this was an ls, I'm sure they would be pushing for more.

@robertcranwell7847

2 жыл бұрын

Supercharged 6.2 LS motors are hitting this without Race Gas.

@rickgehring7507

2 жыл бұрын

it's small cam profile and a crappy Edelbrock blower.

@brandonUwanawich954

Жыл бұрын

@@rickgehring7507 exactly a whipple 3.0 or a d1x would make over 900

@rickgehring7507

Жыл бұрын

@@brandonUwanawich954 we just finished up a 364(4.125X 3.40) BGE block, 6.30 C to C lentz rods, 1.28 Ph custom Gibtec pistons, 2.9l Whipple similar to a Drag pak but with out some of the "NHRA" limitations, Thitek Heads , BAM solid Lifters and Custom Comp., 1175hp @ 8200 RPMs

Promise, I did not notice the mad oil leak from the drivers side valve cover.....and even if I did notice it, I would never say anything about it. Oh, wait....

After my contract expires and I get outta the Marine Corp, I might be interested in becoming either a automotive machinist or a diesel mechanic. IDK which one yet but I'm 2 years into a 6 year reconnaissance contract. With 4 years of active duty left I've got plenty of time to decide.

@thetilemaniac

3 жыл бұрын

Thanks for your service bro. The real mechanic money is in Aviation, my buddy's son makes more than most doctors wrenching on Helicopters, he learned in the USAF. 👍🇺🇸💪!!!!

@1982MCI

3 жыл бұрын

@@thetilemaniac I’d sure like to know where he’s making more than a doc at wrenching on helicopters then cause I was a jet engine mechanic in the Air Force for ten years and am A&P Certified and I know guys making $100k no problem but that’s a far cry from a docs salary. Most aviation mechanics are gonna make between $50-$75k but if you’re lucky enough to get on with a private owner or company then you may earn considerable more than most commercial airlines pay union wages. There probly are a few of the high paying jobs out there like your talking about but they will be few, they will be hard to get, and there is probly a decades long wait to get one IF you were to meet their strict hiring guidelines and if your ever lucky enough to get one of those positions then you don’t ever want to screw up and leave or lose it cause it’s gonna be a once in a lifetime opportunity!!

Make you that Power out of it with No turbo, No blower. No Nitrous.

These are not late model Hemi's, they are Gen 3 Hemi which is a small block. The late model Hemi measures 4.250 bore and 3.75 stroke at 426 cu/in with 4.800 bore centers. Late model Hemi's were in production 1965 to 1971.

@joshkrause2977

Жыл бұрын

What??? The term “late model” means recently made or of recent design.

@ronsmith7739

Жыл бұрын

@@joshkrause2977 Once again in Chrysler design is the Gen 2 Hemi's 1965 to 1971. In that video are the Gen 3 small blocks from 2002 to present. The Gen 1 Hemi's were from 1951 to 1958. There were actually two sizes, 240, 331, then the so called big blocks, 354, 392. And they were heavy weighting over 800 pounds each. Yes I'm a old guy I know this.

10:45 polished valves to mirror finish for maximum airflow is only good for flow bench bragging. In real world they will have a carbon film on them in no time. There goes the mirror.

Linda's 'licensed to go 165-190' what does that mean? Licensed by who?

What year was the block used?

Dodge did it factory with a factory tune and smaller cubes.

Is it for sale

780 Horse Power 😳

2:41 Is that Pat?

🔥🔥

Hey uh let me get that engine😀