I've been looking for a tutorial that explains both the "how" AND the "why", and this absolutely did both! Fantastic video, thanks for posting!

I am totally cleared after seeing the tutorial.

Superb tutorial. Thank you very much!

The greatest training ever! Thanks

Thank you for the great tutorial! It helped me so much.

@OiVM

2 жыл бұрын

Awesome! Glad it was useful for you.

The best !!!!

The best.

Can you share how to change and keep the CO2 chamber for live cell imaging

Thank you for this helpful video! I have a question concerning the Beampath Configuration: How can I change the Detectors? Instead of Ch1, CHS1 and CH2 I can only choose between CH1, CH2 GaAsP and CH3. How can I set up the same detectors you showed in this video? I'd be extremely thankful if you could help me out with that!

@OiVM

2 жыл бұрын

Glad you liked it! Detector choice will depend on your system configuration. Some LSM 780/880 instruments are equipped with a single PMT instead of the 32 channel spectral array (ChS) in that second detector slot. Regardless, the order of the channels would be the same for the sequential acquisition presented. On your system use Ch2 GaAsP in place of ChS1 and Ch3 in place of Ch2. Ch1 remains the same. You will just rely on the upstream prisms for emission separation to Ch2 rather than the electronic selection the 32 element spectral array provides.

How about taking DIC or PC please, Thanks

This tutorial is so great! Do you have a written protocol that I can print so all the students can follow? We use a shared equipment and all the settings are deleted when we exit the program. Is there a way to get the same settings when we go back to the confocal? Thank you s much!

@OiVM

2 жыл бұрын

Thank you Cleusa! We do have a PDF guide on our website: oivm.org/lsm880/#training As for saving your settings - you can either save them to the Experiment Manager at the top of the Acquisition dialog or you can load them from an image by clicking the 'Reuse' button from any CZI image taken with the same system.

@cleusaoliveira9788

2 жыл бұрын

@@OiVM Thank you Jason. The guide has some areas where the text is not very visible. I looked for the "reuse" button but I couldn't find it. Is it possible that we don't see it because of the version that we have?

@OiVM

2 жыл бұрын

@@cleusaoliveira9788 You can find the Reuse button in the 'Dimensions' tab located at the bottom of the image display.