Very Useful. Thank you

I am now certified to work for pen dot

VERY USEFUL FOR MY WORK THANKU SO MUCH.

Beautiful

All i wanted to do was find out what these black squares are i am seeing all over roads in Illinois

Very Nice Great Information Thanks a lot Love Long.

@umakantapegu3280

Жыл бұрын

Ri

Muito bom as experiências e explicações aqui no Brasil EXATAMENTE em Fortaleza eu estou trabalhando fazendo a instalação de metrocalt nas BR e CE AQUI DE FORTALEZA

I appriciate the presenter she describes how the traffic volume or data collection counter set up for functioning stepping was good and english ax cent was good but why repeatedly showing the battery and cable set up to use nail and other gum etc it may be for commercially gain to take time to extend time thanks presenter

As shown at the end of the video it is a bad idea to repeatedly disconnect the battery using the Spade terminal connectors of the wire. These spade receptacles are not designed for repeated insertions and will quickly loosen and become subject to disconnection due to vibration and their current capacity will be decreased. Using pliers to slightly squeeze them make them tight can be done once or twice but the elasticity of the metal and the shape of the receptacle will become distorted. For one it is not necessary to disconnect the terminals before measuring the battery voltage. There is no good reason for doing this. The cable had an inline connector that should be used for disconnecting the battery if you need to reboot the device. Otherwise keeping everything connected will give you much longer life on these connections. Using a Dielectric grease on the connectors is helpful if corrosion occurs but I would not expect that to be much of a problem. If there is corrosion on these terminals there would also be corrosion on the circuit board which would lead to leakage current and circuit failure. I develop products using these connectors.

any instruction for road reporter Software user ?

2:28 thats a very interesting key there... it looks like an old school skeleton key design.

Also @ 6:32 you should never Block view of the speed limit sign espically in a state vehicle.

sometimes roads tubes give same value of time passage for different types of vehicles with differnt speed.What to do then if the data consist of high percentages of zero headway due same time passage value ? seconsldy, what value it will give if 2nd vehicle front wheels passes pneumatic tubes ahead of 1st vehicle rear wheels?

Can a link be provided to the referenced document on the use of "road tape" as prepared by the PennDOT Bureau of Planning and Research. The reference is made in the recording at the 11:35 mark on the video. Thank you

@PennsylvaniaDOT

6 жыл бұрын

More information on traffic counting can be found here: www.penndot.gov/ProjectAndPrograms/Planning/TrafficInformation/Pages/Traffic-Counting.aspx

U R Company Name Plz

kindly give the number of ....ha ha ha. zyra

I worked in Traffic Data Analysis company using videos, now why you are give me a job for manual counting for TMC,Link,queue, pedestrian Count etc

...I have no idea why I watched this...lol

@vickymalhotra7401

3 жыл бұрын

😆