You should put a go pro inside the truck and get some inside the cab pulling footage 🤘🏼

I was once at an NHRA race. Honestly, there was a whole lot of absolute nothing between the races on the 1/4 mile. However, that night they had an exhibition car, a jet car. It did not have motor traction to the wheels. It was just a jet hooked to four wheels and a, "pray for me" cage.

@littlebuddy761

Жыл бұрын

Gotta look into the NTPA

Some lead up front and a water box in back and you are good.... it's just as much about weight distribution as it is horsepower..but all in all great job for your first weekend.

Really cool Bruce. One of my peoples was there and seen you rip. Good finish and great close up pics too he shared. 73's.

I love the truck and tractor pulling content. There is nothing like a tractor pull and I've been going to them since I was little. Lots of good ones here in Ohio

@HuntGamingProductions

Жыл бұрын

Bg and urbana are the best

@Trenton-om9qs

Жыл бұрын

@@HuntGamingProductions I would love to go to them someday. The ones I go to are just at the Fairs in my local area. They still put on a good show though

@NoPrepFans

Жыл бұрын

I’m from western Pennsylvania and pulling is big there

Great last pull of the night. Had a great time and got vid of the truck going down

ABSOLUTELY-----> AWESOME!!!!!!!!!!. 🙂

Love honesty!

looked so damn cool twisting that frame while doing the pull

You should get a winch mounted to your trailer for loading pulling truck and future tractor

That was really cool! Thanks for sharing.

Another good pull bruce and your right at least nothing broke. You will get better every time you pull. Awesome truck!

i have to say Bruce, that run actually got me pretty pumped up. i'm ready to see you get back out there more, soon.

Awesome job guy's. Looks like so much fun. I know it is watching them. Go watch the truck and tractor pulls when they're near me when can afford it. Good luck on getting MORE power

Great Great pull Bruce 👍.

As a aviator who grew up on a farm and drives semi’s for a living, I loved this video for many reasons!

Truck doesn’t sound like it’s firing on all 6. Easy way to figure out is a temp gun. To the Manifold. Hang you more weight on the Rear ass end of the tractor to make it dig a bit harder. And to get you up to weight. Looking good thou.

@ThanksHero

Жыл бұрын

He didnt put the injector harness on correctly with the new injectors a couple videos back lol.

@scottvaughan473

Жыл бұрын

@@ThanksHero fast way to buy a bottom end for a CAT

@ThanksHero

Жыл бұрын

@@scottvaughan473 Maybe he will notice it making oil before its too late

@scottvaughan473

Жыл бұрын

@@ThanksHero Don’t take long. A CAT platinum kit is about 35 grand

Nothing makes me happier than seeing all the hard work I’ve watched you all put in that tuck and it making two clean passes as it did. Keep the videos coming buddy💪🏼💪🏼

I know nothing of trucks but definitely think it’s a nice looking one!

Great job bruce. Watched your videos previously with the diesel drag truck and cleetus, kinda lost interest in channel when you moved into over the road hauling. The tractor store content was a bit on the small hp range of interest for myself being I'm usually running 175-310 hp tractors on a dairy farm. But with that being said your new endeavor into semi pulling has brought my viewership back to your channel. Past weeks content is so every race/pull team when running an untested machine. Definitely need more fuel, sounds very poppy. Hoping you can make a trip up to northeast and catch an event with some pa posse pullers,they all seem to be good Ole boys just having fun. Check out the new school freightliner Cabover with the huge Detroit motor that pulls up in Canada, that thing is a beast. Best of luck on the season.

All kinds of internal combustion vids are my guilty pleasure. Not exactly ECO stuff. But the sounds and the power. And speed.

Be proud Bruce no games just gettin er done and havin fun great video

Awesome pull Bruce proud of you buddy .Thanks for sharing 👍

Deff a great vid godbless and stay safe

Bruce Wilson is the best

“This fella has a gas engine to start Up the jet engines”=Pony motor

Great job Bruce that was a awesome run buddy keep it up u got the hang of it already good luck

Those are really good poles you did I'm very proud of you

thankyou love the lorry and tractor pulling content and how youu take us up close and personal to the machines and explaining how everything works keep this comming love it

Hey Bruce great run ..... I have an idea have a dash cam in the truck when your going down the track... I'm not sure if you are on boost b4 you leave the line but your second hook was alot better then the first

@FullSendGaming82

Жыл бұрын

Oh didn't your truck weigh a little lite anyway .....go look at some other pullin trks to see where you could put weight.... you will get it figured out

I wouldn't have the patients for one of those jet engine pullers they take forever Todo anything but they are neat the mechanical part of them how they are put together

Great video, Bruce. Keep’em comin. Thanks for sharing.

hey bruce thanks for covering those jet tractors that was neat to see how they start al all, also truck sounded good ran good an pulled like an animal ! great job great drivin !

Acert fuel pump and Acert pressure relief valve will give you more fuel pressure. We changed the relief valve on my 6nz and cranking out a 120 lbs of fuel pressure.

The way the jet tractor started the jets was cool

Great pulls this weekend enjoy seeing you pulling again..

Hell yeah Bruce. I love the content. Your guys are doing a great job, keep it up.

This is an awesome video!! Thank you!!!

Great video, loved it ,can't wait until the next pull , thanks Bruce 👏👍

You got something good there to go with unless you just got to ask yourself how far you want to go with it. Otherwise the first thing I would get rid of is the ECM that's going to be your biggest holdup. Most of them that run I'll have some kind of water injection and big ice box too. Weight wise it look good. Carried it nice. You seem to be able to drive it off the line. Pretty good too. I work with a team that has a super stuck tractor that runs four of those turbochargers like you have on that truck but it's cranking out some RPMs on alki fuel

@nitemare18

Жыл бұрын

That truck can run with an ecm they do it everyday if you watched any of this before. With him only running one charger and he doesn't have a lot of fuel he doesn't need the water injection.

Happy to see you doing what you love love the truck tractor pull video let's go 💪✌️

Bruce you should add some weight in the front and give the frame a foot of exstention

Awesome stuff great video can't wait for more pulling awesome thanks for sharing

Nice driving man. That was a great pull for your "first run."

Great Video. Nice Coverage of some of the NTPA event. Truck looked good. Should bring it up to Onaway in May. Thanks for promoting sled pulling.

Did I just witness 2 jet engines on a fvking tractor!!!??? Now I’ve seen it all lol. The engineering !!! BRAVO! Awesome truck Bruce.

Bruce next I think it would be cool to have a go pro inside the cab. Great video as always tho.

Bruce you absolutely blew it out of the water Business Expense. Your truck is freakin awesome. I was so pumped watching you pull. Great job man can't wait till next one!!!

Art Arfons of the green monster fame had afterburner on his triple jet engine green monster pulling tractor in the ushra

I miss the Tractor pulls at the Astrodome from when I was a kid.

Truck and tractor pulling is definitely a rush and addiction!

Great video Bruce

that was a great pull with that beast sweet truck looking forward to seeing the cam install an whatever else

Always wondered Bruce why they don't weight at least one side off the front to limit the amount of twist when pulling ? Smiles 😃 from Canada 🇨🇦

Sweet truck

Yep truck and tractor pulling is way cool,keep doing it Bruce!

Nice pulling great video of other tractors!

Dam that truck sounds soo good in the higher rpm’s and that big turbo spooling heck yes all that hard work paid off

Awesome, Bruce awesome to see that you have a fantastic horse power truck that you built especially the motor and watch you go pull in. I used to watch that so much you’re in Canada thank you for sharing your journey. I love watching what you do next and what is your next adventure? Love your channel bro

I have a Black 2007 Argosy 265 wheel base I do love the newer grill and side air ducts

Rosick well drilling with Fatal attraction is from my home town Bruce!

Great pull Bruce. Can’t wait to see more

Are you not going to give us an update on what you did with the trx?

Ride that wheelie down the track, pulling truck and the Tratter Taxi looking good. Was the fender on the drive wheels rubbing the tires on that last pull?

Glad to see you in ocala

🤔 guessing that's why the solid steal bumper was on front , "weight" to keep that front down a bit more 👌😉

Great run Bruce! Thing is a beast!

Watch your front drive axle at the end of your run at about 13:45 and 14:38 . I would pull off the diff cover and check in there for metal bits and also make sure no bolts sheared off on the suspension anywhere. I hope it's nothing but couldn't hurt to check it out.

Man I grew up going to truck and tractor pulls. We used to have a lot of them here in NC. I think you're gonna do good with that pulling truck. Keep the videos coming brother. 😎✌️

That’s the one bad thing about truck pulls, it takes forever!!

Truck looks awesome 👌 love the colour of the BAD BOY ...keep it plain looks tough ( may need some sponsorship though ) ...should be happy , was a good run👍, enjoy seeing you having fun..

Really enjoy all the tractor pullin stuff. Keep it coming please. Great job also for your first time. Did ya place???

its looking better with the Crome bumper

💥 You Can Have All The HP In The World 🌎 But Putting It To The Ground Is The Art💥

Appreciate all the awesome content you put on Bruce have been watching you since the very beginning are you going to be running the next tractor pull in Zellwood I want to see that truck and action

My favorites had Alison aircraft engines from WW II aircraft

Great job!

I use to watch those jet engine tractors in the 80’s. The Green Monster

you should have made your lettering chrome in the back.

I have to say that truck is A BEAST!!!!! it was awesome!

Awesome job Bruce!

Cool trucks and tractors

love the content... love pulling.. cant wait...

Awesome video.

Such a nice truck bruce

It always blows my mind in motor sports how people will own them but not drive them where’s the fun in that

Truck looks sick! I may be way off here as I'm a gasoline small block chevy guy but it sounded like it was down a cylinder at low rpm and maybe everywhere.

beautiful black semi

WOW ,,,THAT WAS BAD ASS'R THAN HELL RIGHT THERE NOW. ..... That camera view from the stands and the way it waa Pullin '.. Wow 👌 Tuff E-Nuff I'd say Cleveland Tenn waivin a Hand ✋️ Sayin Peace ✌️ Love 💚 18 Wheelz to All

Oh hell yeah

Looks like your clutch started to slip at the end. You can see the tires stop for a split second. Still could use quite a bit more fuel as well.

kool clip.

Love the vids man!

Sweet. New to the channel and had no clue you were so close to my location. I need to do more web checking for pulls nearby. Side note, my dad and I both worked in the plant that built that kitty Cat (among many, many others). Dad spent his entire 40+ year career there.

I absolutely love seeing Bruce in his semi rolling that coal, it gives me a rush watching it ....🤙🏼💯full send

Nice work with the pulling truck.it’s a nasty rig.👍

enjoyed that video nice truck

Now you know where to put some of the weight you need to add

There is also semi truck drag racing with a load and without.

Dammit Ryan get your filming skills up to snuff 🤣🤣🤣jk buddy much love! Great video @Bruce Wilson