Triumph, TR6 engine, TR6 Motor, assembly, Montage, description, Erklärung, Animation, Williams illustration, Zusammenbau, Teile, Parts
Жүктеу.....
Пікірлер: 79
@rgion292476169 жыл бұрын
This is Brilliant on the TR6 motor. CGI made this engine look fabulous. Granted this engine is dated but in the hearts of people who got to drive the TR6 this engine holds a place of respect and in some cases reverence. Excellent video of this iconic British sports car engine.
@PalmaMultimedia9 жыл бұрын
As an engineer from the 60's I applaud you. As an animator from the 80's I applaud you.
@RustyBeauties7 жыл бұрын
This is amazing! I can't believe it still doesn't have millions of views.
@Encom010 жыл бұрын
As a Triumph 'guy' - awesome! Many thanks for producing this :)
@donjensen7853 жыл бұрын
awesome animation
@laurijorgenson66838 жыл бұрын
This was amazing. Love being able to see how everything functions. It's a great tool for education purposes too. Thank you for sharing!
@peterfeltham56127 жыл бұрын
I owned one for several years,what a terrific car.God if only these were made these days,perhaps with a few modifications,they would sell like hotcakes.
@ericheine24145 жыл бұрын
Excellent video. I've had over 245 cars. Three of them were TR6s. A 73, 75, and 76. My favorite was a 75, Konis in the front, three quarter valves in the rear, 205/70/15. Sold for $19,950. The biggest mistake was putting a small block 350 in a TR6. Destroys the balance of the car, making it inelegant. I always wanted a PIE and a cross flow cylinder head.
@lordemed1
3 жыл бұрын
The sweetest sounding violin isn't the loudest
@garciaducati9 жыл бұрын
Absolutely fantastic!! Thanks so much for putting this together. I am about to rebuild my TR6 engine and this will come in handy.
@68Vitesse10 жыл бұрын
Really impressive piece of work and thanks you for it!
@nagevmai10 жыл бұрын
They forgot the oil leak.
@rednip60
10 жыл бұрын
Watched it twice and no oil went in...no leaks then!
@BritIronRebel
6 жыл бұрын
LOL!
@PhilipMachanick
4 жыл бұрын
Reminds me why the British stopped making computers. They couldn’t find a way to make one leak oil.
@adwest68
3 жыл бұрын
@@rednip60 no leaking, marking their/her territory..
@philhealey4494 жыл бұрын
Beyond brilliant . Has the correct green HT leads and misunderstood Lucas PI. Hope one day my 1971 machine will be dragged out of the shed and fettled to run on more than 5 cylinders!
@lemmonsinmyeyes9 жыл бұрын
This is beautiful! Thank you so much for making this!
@steveflor99423 жыл бұрын
What a crude, old-fashioned little beastie it is. Interesting video. Thanks
@wmtdifur6 жыл бұрын
Excellent!
@adrianhughes21638 жыл бұрын
Absolutely stunning video - very well done to all involved! :)
@taulantshabiu86878 жыл бұрын
they are the best video makers
@orinbay8 жыл бұрын
Very clever! Thank you for sharing,
@marcomaruan24068 жыл бұрын
very interesting engine animation especially for a rare engine
@vincentwright10253 жыл бұрын
I owned one for 12 years, complete restoration in '84. Maybe not the best handling sports car but it ticked a lot of boxes for me. Children stopped play I'm afraid..
@alanlake52205 жыл бұрын
Thanks for posting a really neat video
@mikestotko100610 жыл бұрын
absolutely stunning
@SchweppesDA10 жыл бұрын
Brilliant!!!! Chapeau, Arthur!!!
@twentyrothmans730810 жыл бұрын
Astrein, das war fantastisch.
@TRiumphTR3a10 жыл бұрын
Super gemacht. Thumbs up !
@ykhan70178 жыл бұрын
bravo! excellent work
@rolowashbu9 жыл бұрын
Excellent! Bravo!
@bobhaefner15827 жыл бұрын
Thanks! KC Triumph Sports Car Club .... Fine assembly of engine , plus the animation..... (421 Likes to 11 that could not enjoy it ...) Losers lose ..
@honnse14 жыл бұрын
Sehr, sehr lässig!!! Danke!!! :-)
@victorboucher6755 жыл бұрын
I had a 69 GT MKII and 70 TR6 and now drive 2000 JEEP 4.0 ... I guess I really like those pushrod inline 6s.
@khadgar5610 жыл бұрын
Wonderful I love it. Next job the rest of the car!
@tuffguy0073 жыл бұрын
Fantastic.
@cebastienlarochelle81828 жыл бұрын
this seems to be a very simple engine but the animation is nicely detailed
@colinbaldwin38334 жыл бұрын
I can’t imagine how you were able to do this. Very impressive. I had a TR4A with a similar 4 cylinder engine. They are big heavy engines. Lovely to get an ‘inside’ view.
@racketman2u
Жыл бұрын
Similar but not related. The TR4A engine was the same as earlier TRs, a development of the 4 cylinder Ferguson petrol tractor engine; the TR6 used a stroked version of the later 6-cylinder Vanguard engine.
@williambrewer31439 жыл бұрын
Brilliant - bit cleaner than my engine!!
@fabiobagnoli68459 жыл бұрын
Sensationelle Animation, wollte sowas schon immer mal sehen und bin eben durch Zufall draufgestossen. verstehe meinen TR6 jetzt etwas besser :o)
@frontsidegrinder68583 жыл бұрын
Powerful, thanx!
@sergiocollazo31919 жыл бұрын
Amazing!
@greenpaint20059 жыл бұрын
Best thing on you tube
@tamerkaraca31910 жыл бұрын
harika bir animasyon hayran kaldım..
@terryatpi Жыл бұрын
Cool
@gordonblank68453 жыл бұрын
I was wondering what the piece was front of the distributor. Wasn’t until the fuel lines went to the intake did I realize it was fuel injection. Great animation.
@Mr1300SKIPPY5 жыл бұрын
Superb animation, very useful to this TR6 owner - many thanks ! ... and maybe then the gearbox ? ;-)
@Theandyhumphreys9 жыл бұрын
Excellent. I have had a TR6 since 1982. Curious why this CGI animation was made as it was expensive, brilliantly done but Why? Part of a bigger programme perhaps?
@gertjanvandeklashorst48438 жыл бұрын
50K hits. Not bad
@watzonda2b6 жыл бұрын
Truly awesome to watch and learn from.....Can you do this with the Chrysler Slant 6 please!!
@adwest683 жыл бұрын
Respect!
@RichardBrownPhotography10 жыл бұрын
even hear the loud TR lifter noise. Nice. would love to know what programs were used to make this?
@lemmiestone28724 жыл бұрын
I need this for a TR4!!
@eagled969 жыл бұрын
amazing! 5*
@lagerzok10 жыл бұрын
Is the CAD drawing of the block and crank available for purchase?
@PeakTorque10 жыл бұрын
Amazing work. Did you model all the parts yourself? Must've taken ages!
@routmaster384 жыл бұрын
Had a Stag years ago with no engine problems but a lazy auto gearbox.Hard and soft top modeled on Mercedes design but manual and took ages to erect.
@richardhall95004 жыл бұрын
Did the MK1 2.5Pi have the same motor as the TR6? We had a brand new one in 1969 and never had any fuel problems with it. She went like a rocket. Lovely car, lovely note.
@MrDodgedollar
3 жыл бұрын
Yes, more or less the same engine Richard. Very rare car now, less than six mk1 pi’s in existence
@jimmoscardini36657 жыл бұрын
Very nice! Too bad they're going to have problems with it soon. They forgot the thrust washers!
@paultegler
6 жыл бұрын
the 6 never had PI either! the TR5 yes.
@racketman2u
6 жыл бұрын
@ptegler100; Dead wrong, of course it did. The USA model only had carbs, though.
@nigelhook3437
5 жыл бұрын
Itll overheat first due to no water 😉
@peterwilson63636 жыл бұрын
Hello. Brilliant animation thanks. Is it possible to buy the models used in this animation please?
@midgetwidget10 жыл бұрын
At 3:57 How did you get the engine apart without tearing that timing cover gasket, I always shred mine. :) VERY COOL AND well done animation. But why was the effort put into this? College paper? GREAT JOB!!!
@peterwilson25886 жыл бұрын
Hello. Brilliant animation and models - Any chance that I could buy the models of each part please, to save me the work of creating my own. Thanks either way. TR6 owner with engine overhaul underway and Solidworks user.
@thefatkev4 ай бұрын
Is this model available for SketchUp etc
@craigcarnegie86066 жыл бұрын
Oil?
@philhealey4495 жыл бұрын
Great even down to the correct vile green HT leads, but would prefer more revving noises instead of irritating music.
@KabouterPl0f5 жыл бұрын
at 0:21 they specify its a overhead cam, while you can clearly see the rockets and tappets
@dodgeplow
4 жыл бұрын
They do not. it says OHV not OHC.
@Schlipperschlopper3 жыл бұрын
Sadly from 2030 on all combustion cars are forbidden in entire Europe.
@MarcDanziger4 жыл бұрын
No wonder TR6's had so many issues - there's no cam drive!!
@MarcDanziger
4 жыл бұрын
D'ooh!! Not OHC.
@duccanard90793 жыл бұрын
I call Bullshit.9.5 compression? Naw, best I found in the 5 I've played with is 7.8,maybe.Out of those 5,0 were 6 bbl's.But that was the 80's.Now,I put 170 h.p. ford 200's in MG's with a t5.
Пікірлер: 79
This is Brilliant on the TR6 motor. CGI made this engine look fabulous. Granted this engine is dated but in the hearts of people who got to drive the TR6 this engine holds a place of respect and in some cases reverence. Excellent video of this iconic British sports car engine.
As an engineer from the 60's I applaud you. As an animator from the 80's I applaud you.
This is amazing! I can't believe it still doesn't have millions of views.
As a Triumph 'guy' - awesome! Many thanks for producing this :)
awesome animation
This was amazing. Love being able to see how everything functions. It's a great tool for education purposes too. Thank you for sharing!
I owned one for several years,what a terrific car.God if only these were made these days,perhaps with a few modifications,they would sell like hotcakes.
Excellent video. I've had over 245 cars. Three of them were TR6s. A 73, 75, and 76. My favorite was a 75, Konis in the front, three quarter valves in the rear, 205/70/15. Sold for $19,950. The biggest mistake was putting a small block 350 in a TR6. Destroys the balance of the car, making it inelegant. I always wanted a PIE and a cross flow cylinder head.
@lordemed1
3 жыл бұрын
The sweetest sounding violin isn't the loudest
Absolutely fantastic!! Thanks so much for putting this together. I am about to rebuild my TR6 engine and this will come in handy.
Really impressive piece of work and thanks you for it!
They forgot the oil leak.
@rednip60
10 жыл бұрын
Watched it twice and no oil went in...no leaks then!
@BritIronRebel
6 жыл бұрын
LOL!
@PhilipMachanick
4 жыл бұрын
Reminds me why the British stopped making computers. They couldn’t find a way to make one leak oil.
@adwest68
3 жыл бұрын
@@rednip60 no leaking, marking their/her territory..
Beyond brilliant . Has the correct green HT leads and misunderstood Lucas PI. Hope one day my 1971 machine will be dragged out of the shed and fettled to run on more than 5 cylinders!
This is beautiful! Thank you so much for making this!
What a crude, old-fashioned little beastie it is. Interesting video. Thanks
Excellent!
Absolutely stunning video - very well done to all involved! :)
they are the best video makers
Very clever! Thank you for sharing,
very interesting engine animation especially for a rare engine
I owned one for 12 years, complete restoration in '84. Maybe not the best handling sports car but it ticked a lot of boxes for me. Children stopped play I'm afraid..
Thanks for posting a really neat video
absolutely stunning
Brilliant!!!! Chapeau, Arthur!!!
Astrein, das war fantastisch.
Super gemacht. Thumbs up !
bravo! excellent work
Excellent! Bravo!
Thanks! KC Triumph Sports Car Club .... Fine assembly of engine , plus the animation..... (421 Likes to 11 that could not enjoy it ...) Losers lose ..
Sehr, sehr lässig!!! Danke!!! :-)
I had a 69 GT MKII and 70 TR6 and now drive 2000 JEEP 4.0 ... I guess I really like those pushrod inline 6s.
Wonderful I love it. Next job the rest of the car!
Fantastic.
this seems to be a very simple engine but the animation is nicely detailed
I can’t imagine how you were able to do this. Very impressive. I had a TR4A with a similar 4 cylinder engine. They are big heavy engines. Lovely to get an ‘inside’ view.
@racketman2u
Жыл бұрын
Similar but not related. The TR4A engine was the same as earlier TRs, a development of the 4 cylinder Ferguson petrol tractor engine; the TR6 used a stroked version of the later 6-cylinder Vanguard engine.
Brilliant - bit cleaner than my engine!!
Sensationelle Animation, wollte sowas schon immer mal sehen und bin eben durch Zufall draufgestossen. verstehe meinen TR6 jetzt etwas besser :o)
Powerful, thanx!
Amazing!
Best thing on you tube
harika bir animasyon hayran kaldım..
Cool
I was wondering what the piece was front of the distributor. Wasn’t until the fuel lines went to the intake did I realize it was fuel injection. Great animation.
Superb animation, very useful to this TR6 owner - many thanks ! ... and maybe then the gearbox ? ;-)
Excellent. I have had a TR6 since 1982. Curious why this CGI animation was made as it was expensive, brilliantly done but Why? Part of a bigger programme perhaps?
50K hits. Not bad
Truly awesome to watch and learn from.....Can you do this with the Chrysler Slant 6 please!!
Respect!
even hear the loud TR lifter noise. Nice. would love to know what programs were used to make this?
I need this for a TR4!!
amazing! 5*
Is the CAD drawing of the block and crank available for purchase?
Amazing work. Did you model all the parts yourself? Must've taken ages!
Had a Stag years ago with no engine problems but a lazy auto gearbox.Hard and soft top modeled on Mercedes design but manual and took ages to erect.
Did the MK1 2.5Pi have the same motor as the TR6? We had a brand new one in 1969 and never had any fuel problems with it. She went like a rocket. Lovely car, lovely note.
@MrDodgedollar
3 жыл бұрын
Yes, more or less the same engine Richard. Very rare car now, less than six mk1 pi’s in existence
Very nice! Too bad they're going to have problems with it soon. They forgot the thrust washers!
@paultegler
6 жыл бұрын
the 6 never had PI either! the TR5 yes.
@racketman2u
6 жыл бұрын
@ptegler100; Dead wrong, of course it did. The USA model only had carbs, though.
@nigelhook3437
5 жыл бұрын
Itll overheat first due to no water 😉
Hello. Brilliant animation thanks. Is it possible to buy the models used in this animation please?
At 3:57 How did you get the engine apart without tearing that timing cover gasket, I always shred mine. :) VERY COOL AND well done animation. But why was the effort put into this? College paper? GREAT JOB!!!
Hello. Brilliant animation and models - Any chance that I could buy the models of each part please, to save me the work of creating my own. Thanks either way. TR6 owner with engine overhaul underway and Solidworks user.
Is this model available for SketchUp etc
Oil?
Great even down to the correct vile green HT leads, but would prefer more revving noises instead of irritating music.
at 0:21 they specify its a overhead cam, while you can clearly see the rockets and tappets
@dodgeplow
4 жыл бұрын
They do not. it says OHV not OHC.
Sadly from 2030 on all combustion cars are forbidden in entire Europe.
No wonder TR6's had so many issues - there's no cam drive!!
@MarcDanziger
4 жыл бұрын
D'ooh!! Not OHC.
I call Bullshit.9.5 compression? Naw, best I found in the 5 I've played with is 7.8,maybe.Out of those 5,0 were 6 bbl's.But that was the 80's.Now,I put 170 h.p. ford 200's in MG's with a t5.