Toyota Sienna 2013 Cupholder Removal

Автокөліктер мен көлік құралдары

This tutorial describes how to remove the retractable dashboard cup holder unit from a 2013 Toyota Sienna. The 2013 Sienna is a 3rd-generation model which was introduced in 2011 and retains a similar dashboard layout until 2014, so this video may apply to other model years.
We hope this video helps you find those long lost treasures eaten by the cup holder.

Пікірлер: 55

  • @vincenzo2798
    @vincenzo2798 Жыл бұрын

    I used to writes instruction manuals for wiring analog TVs, VCRs, and stereo equipment. After I wrote them I would ask a friend that was not technical at all and when they came up to a point that was unclear, I would take note and clarify my text. It appears you have done this many times as everything was crystal clear, in focus, and logically presented. Your use of auxiliary lighting, camera/phone support with a fluid or fluid effect head, with a clear and precise voiceover was fully appreciated by this viewer! Kudos for a phenomenal video.

  • @slacker_DIY
    @slacker_DIY6 ай бұрын

    I was able to avoid the masking tape altogether. Just pull the coiled spring out of the roll, insert it into the cavity, with enough length, it will not spring back. Slide the cupholder in, and boom! You are done!

  • @SuRFerretti
    @SuRFerretti2 жыл бұрын

    I'm not sure what got stuck to make my cupholder not open, but after force prying it, there was a strong magnet phone holder in the driver's side cup which would have been directly on top of the metal retractor, probably making the tray unable to slide. I also removed the air controll module and side seat heater/charger port for more visibility. Thank you for taking the time to post this! The card idea to slide out the tray was genious.

  • @slacker_DIY
    @slacker_DIY6 ай бұрын

    My cup holder would not close because a plastic clip fell into the slot, so it could not reach the latch. Thanks to the video, i was able to retrieve my clip. And close the cupholder. But then it got stuck, so i used a pry tool to pull it out again.

  • @gwilled_cheese_882
    @gwilled_cheese_8823 жыл бұрын

    This happened to me but with a 100 dollar bill! Thank you!

  • @melissabriggs8004
    @melissabriggs80045 жыл бұрын

    This tutorial helped me unclog my cupholder that was stuck with a phone charger cord. Great tutorial! Thank you!

  • @carllinnington
    @carllinnington3 жыл бұрын

    Awesome video, very helpful. Just bought thisvan with a broken cupholder and was able to fix in less than 10 minutes!!

  • @stevebandler3173
    @stevebandler31736 жыл бұрын

    Beautifully done - extremely helpful - thanks!!

  • @vk6076
    @vk60764 жыл бұрын

    How to open a cupholder that wouldn't open, pop out at all? In this video the cupholder still opens and did a full removal. Mine is stuck closed.

  • @zacbell5190

    @zacbell5190

    3 жыл бұрын

    Mine is stuck. Won't come out at all. Did you get yours fixed?

  • @vk6076

    @vk6076

    2 жыл бұрын

    @@zacbell5190 Nope. I kinda forgot i have that cupholders.

  • @MMtest277

    @MMtest277

    Жыл бұрын

    @@imlivelaffluvvson were you able to figure out how to get the cupholder to slide open? same problem here and can't get it to open up at all. thanks for any feedback, dealer quote is $800

  • @slacker_DIY

    @slacker_DIY

    6 ай бұрын

    Mine was stuck too, but used a pry tool to pull it out.

  • @yuchoy1
    @yuchoy15 жыл бұрын

    What a great video! Just what I needed. Thanks so much!

  • @slacker_DIY
    @slacker_DIY6 ай бұрын

    This was so helpful and then instructions patient and clear!

  • @billykidj
    @billykidj2 жыл бұрын

    Right to the point, detailed but not any extra fluff, thanks

  • @justinmclloyd
    @justinmclloyd2 жыл бұрын

    Thank you for this informative video. You saved my life right now!!

  • @nasmo1001
    @nasmo10012 жыл бұрын

    Exactly what I was looking for and we’ll made instructions, thank you!

  • @1241md
    @1241md2 жыл бұрын

    Thanks a Ton, could have not done it without your sharing

  • @mbalasubramanian
    @mbalasubramanian2 жыл бұрын

    Thanks for the tutorial. You saved my day!

  • @georgematos9380
    @georgematos93803 жыл бұрын

    Great instructional video...thanks!

  • @sweetsucculentcontentnectar
    @sweetsucculentcontentnectar3 ай бұрын

    Great vids on the 2013 Sienna!! Do you have any plans to make a video on how to replace the dashboard speakers? 😅

  • @meenkashisakalley589
    @meenkashisakalley589 Жыл бұрын

    I like the vedio and it it really helpfull you have explain us very easy

  • @deepnijjar5
    @deepnijjar55 жыл бұрын

    Life saver video thanks dude

  • @fvillarrealg
    @fvillarrealg5 жыл бұрын

    Thanks for this tutorial, I have this same issue on my Sienna , I'll try.

  • @joujouvideo
    @joujouvideo4 жыл бұрын

    Hi Nrz Jam, Thank you for posting this video. My cup holder is shut and I am not able to get it to slide out in order to remove it. Any ideas as to how to get the sliding cup holder to open? Thank you.

  • @scorsesefan91

    @scorsesefan91

    Жыл бұрын

    I had this same thing happen. Used a pry bar to get it moved forward then opened like normal while applying pressure to pry bar

  • @paulorzechowski8220
    @paulorzechowski82202 жыл бұрын

    Amazing video!! Thanks!!

  • @half_monster8582
    @half_monster85825 жыл бұрын

    THANK YOU SO MUCH! MY CUPHOLDER BROKE AND THE PEOPLE WHO FIX IT CHARGES 500$!

  • @mrbadtech
    @mrbadtech5 жыл бұрын

    best video ever!

  • @californiaboy1godbless108
    @californiaboy1godbless1085 жыл бұрын

    THANK YOU FOR THE INFO THAT'S the PLAN FOR TOMORROW CROSS MY FINGERS.. 😁😁😁

  • @bypass1420
    @bypass14205 жыл бұрын

    Hi . I have that problem with cards that went to the back .. how can I do it for my 2016 Honda odyssey? Please help there are no video showing my car. Thanks again

  • @sharonbardos1831
    @sharonbardos1831 Жыл бұрын

    Thank you!

  • @wpreeder
    @wpreeder6 жыл бұрын

    This helped me get the cup holder out of my 2011 Sienna. My problem is not lost items, but the cupholder won't stay closed. There is a little piece way in the back which clearly engages with the main cupholder. It is supposed to be spring-loaded to one side or the other? If so, which way? Is this something that can be repaired? I fear that I'll have to remove a whole lot more of the car to fix it. Pointers to other relevant videos appreciated.

  • @azn789456

    @azn789456

    6 жыл бұрын

    i just fixed that problem, there is this little gear(4:17 in the video is where the gear is right beside the really sharp coil thingy. It clips backs in) at the underside of the cupholder. Mine popped out and i just had to push it back into the cupholder and it was fixed.

  • @ograyenm

    @ograyenm

    5 жыл бұрын

    I had the same problem where my cupholder would not close and lock in place. Got it out with difficulty and found a yellow clip (think it was not supposed to be there) that looks like it may have caused it not to close. So what about the pin that looks like it may be supposed to be spring loaded one way or another? Any additional info appreciated.

  • @laffytaffy8284
    @laffytaffy82842 жыл бұрын

    Thank you very much! What a blessing. Got back my $160 (yeah, exactly, how did it get there?)!

  • @slacker_DIY
    @slacker_DIY6 ай бұрын

    No need for masking tape. Just insert the spring into the slot with enough length and then insert the cupholder.

  • @tommykiddd78
    @tommykiddd784 жыл бұрын

    So why is my Subway card not important? 🤔

  • @haneytito
    @haneytito4 жыл бұрын

    Beautiful ✅ do you or recommend any video how to unplug / remove 67002 dvd video player of 2011 sienna xle. Thanks

  • @soymuyatractivoparalasmuje9597

    @soymuyatractivoparalasmuje9597

    4 жыл бұрын

    Hi, is your Sienna running into audio problems? Currently my DVD player isn’t working, I had to unplug it in order to get audio from speakers. Do you know if the DVD needs to be fixed/upgraded? Thx

  • @soymuyatractivoparalasmuje9597

    @soymuyatractivoparalasmuje9597

    4 жыл бұрын

    This is the problem I have now ! kzread.info/dash/bejne/fp5s0NOKiNOyoZM.html

  • @haneytito

    @haneytito

    3 жыл бұрын

    Mr CEBS kzread.info/dash/bejne/h6GdypKoqcitdqiR.html same issue here.. any solution??

  • @soymuyatractivoparalasmuje9597

    @soymuyatractivoparalasmuje9597

    3 жыл бұрын

    Red Bus 75 yep, it seems to be a common issue with this JBL audio system, I’ve asked several audio car shops, they all say I have to replace DVD player and we’re talking about $400 - $700 so because I don’t have that money right now I bought a cheap headrest DVD player on Amazon ($140), for my 4 year old who’s constantly watching kids shows...whenever i earn extra money, I’ll fix the rear entertainment system.... This is how I fixed the issue with the speakers kzread.info/dash/bejne/fp5s0NOKiNOyoZM.html

  • @haneytito

    @haneytito

    3 жыл бұрын

    Mr CEBS - thank you for sharing the video it helped me a lot to understand, so need to replace a dvd and entertainment center both or just dvd itself

  • @elink786
    @elink7864 ай бұрын

    ❤❤❤❤

  • @Cards-In-The-Closet
    @Cards-In-The-Closet6 жыл бұрын

    Great video. Talk about over engineering! I just wanted to pull it out to clean it. Forget that!

  • @terrybarker3512

    @terrybarker3512

    2 жыл бұрын

    Exactly!

  • @greenparrot7360
    @greenparrot73603 жыл бұрын

    Use the cards to get the cards out

  • @FernandoLopez-qg3ff
    @FernandoLopez-qg3ff Жыл бұрын

    No lo hagan así es más fácil de lonque parece solo hay que jalar ña lámina y con tus dedos se pone. Primero pones el refresque y hay espacio por la parte de abajo es solo logica

  • @slacker_DIY

    @slacker_DIY

    6 ай бұрын

    Yes, you are right.

  • @phil94606
    @phil946062 жыл бұрын

    Wow that copper h band has to be the worst design I have ever seen. Without hyperbole. Terrible design.

Келесі