Congratulations on the first step of what's to be an entertaining journey!

That's going to be a badass rig!!!

Hey George your 80 skipped leg day 😂

Can't wait to see what wheels n tires come next ! 😊

Nice!!!

I have the OME 2” lift both heavies front and back rides nice did a 30mm coil spacer up front to level her out next I’m gonna go with 4” Dobinsons

@bustabeatgeorge

Жыл бұрын

Nice! Dobinsons was a little out of my budget, maybe in the near future

Bro finally got delivery on my 2023 tundra, plan on getting my alucab from tiny rig, and plan on getting a icon suspension system from their headquarters in riverside.

did they extend the Rear Sway bar Drop Brackets? There's a bit more than just putting in the hardware.

@Mark-Dibble

Жыл бұрын

Not required on 80 series cruisers when lifted less than 3 inches. Stock brake lines and drive shafts are also plenty long for the lift too.

@TheSenorChavez

Жыл бұрын

@@Mark-Dibble IMHO, you should really extend them, it needs to sit in a happier angle or the bushings are wasted in short order.

It probably rides higher too because you don’t have any weight on it if they’re the “heavy” set on the springs.

Nice bro!! I have the 40th Anniversary. Thinking of doing the same. How much did the part cost you? Thanks!

I have a question for you 4x4 industry experts! (and I wonder if you can tell me if it's true that the ironman nitro gas shocks match well with the original setup and can be retrofitted with the +5? I have a suzuki jimny 4x4 with m13a 1.3 l gas engine with shock absorbers and standard settings, yesterday afternoon I bought the new ironman nitro gas shock absorbers and the 4x4 spare parts dealer in Florence told me that these ironman nitro gas shock absorbers are suitable for 4x4 off-road vehicles with original finish or in a second you could put the springs higher and it would become a +5 high finish, is that true? Greetings from Florence, Italy!)

Did you install off set bushings for radius arms??

@bustabeatgeorge

Жыл бұрын

Yes they did

Where is this located and what’s the name of the business ? I looked up “ Tiny Redcoat “ on google and other than this shop came ip

@J.Young808

Жыл бұрын

Tiny Rig Co. plus info is in the description

Did he ever say how much he bought truck for

@bustabeatgeorge

Жыл бұрын

I didn’t

@24hrstolive27

Жыл бұрын

@@bustabeatgeorge would u be able too so we can gage in case someone is looking as well

@bustabeatgeorge

Жыл бұрын

@@24hrstolive27 I paid 7.5 for it, hope it helps

Which Ome springs exactly? I have the 850 heavy with Arb in front, the 860 mediums at rear, constant 300 lbs of gear. Still rides like a HD truck! The nitro charger shocks are really firm to imo. Suspension settled down around 1/4 inch after a month. If I had to do it over, definitely dual rate coils, at minimum on front. After 5 years still a rough ride on the street. 35s at 30 psi do help soften it up. Off road is great tho! It does corner like a rally car which is fun. I had exactly 1900 pounds of concrete block, just touching the factory bump stops. 80s are simply the best all around vehicle on Earth! ✌🏽

@bustabeatgeorge

Жыл бұрын

I’ll look into the 35s since up next is tires. Thanks for the help, this Toyota is by far my favorite vehicle to date