No video
Toyota Corolla Disable or bypass the driving lights I
How to disable or bypass the driving lights In a Toyota Corolla 2007 in order for your aftermarket HID's to work properly. Locate a yellow wire in pin 8 (white/yellow in some cars) of the driving light module, under the driver side dash. Cut the wire. The side going to the module connect to ground the side going to the car tape it and leave it alone and you are done thank you for watching
Пікірлер: 26
I've been watching and doing a lot of research and e eeyone out there doesn't explain how to do this properly. I'm going to explain it to you and hopefully it'll answer all your questions instead of these people who make the videos don't even respond back or give a poop about you cutting the wrong wire. Ok this will disable your DRL also know as daylight running lights so you can have full control over your headlights without all the automatic turn on stuff. This will work for the 9th generation 02-08 Corollas. I'm going to make this as simple as possible u like these so call guys making the videos not really telling you the whole steps. *The DRL module box is located underneath the steering column. If you craw under it and look up you will see it. It's a black rectangular/squareish box. That is your daylight running light/headlights box. What you do first unplug the white clip, (now do this part which is very important) otherwise you won't know which wire to cut. After unplugging the clip what you wanna do is pull up on the black box and take the black box out before cutting anything. The black box is crucial because this will determine which wire to cut. On different years is different wires. But the main thing you have to do to make sure is no matter what year it is ALWAYS pin#12. After taking out the black box after unhooked it you look at the inside of the box and there should be numbers inside. Don't worry I'd you don't see pin#12 because it won't be on it. But they have the other numbers in there and you should be able to tell where pin#12 is. They skip every other number for some reason but you get it. So whether the wire you're trying to cut is all red with a tiny strip which is right next to pin#1 &2 which are the big fat red and beige color ones or the yellow wire JUST MAKE SURE you look inside the black box and see where pin#12 is located? Mine is a 2005 Corolla S and mine is red with the tiny stripe. All you do is just cut the red and white stripe wire and use some electrical tape and tape both of the cut ends. THATS IT!! THATS ALL YOU NEED TO DO! This is for the red and white stripe wire. For the yellow wire which is usually for 02-04 models I believe is the yellow wire and from what I see researching I find that you have to cut the yellow wire and tape the end and ground the one coming from the clip/module. I'm not sure about this since mine is a 2005 and I did not do it that way. But to be sure just MAKE SURE YOU LOOK INSIDE TYE BLACK BOX to see where pin#12 is in your Corolla? If you your pin#12 is the yellow one I advise you to just cut it and hop out and turn your car on and see if the DRL is disable? If so great it worked if not then follow the steps to ground the wore coming from the module/clip part and make sure you tape off the other end. Ok, I hope this is more clear then some of these videos that are made on KZread and the internet. If you have any questions please feel free to ask? Thanks and drive safe and take care of your Corolla.
@kennydizon86
3 жыл бұрын
Dude you’re a true G thank you
@Food-is_Life
3 жыл бұрын
@@kennydizon86 from one G to another, anytime G. 👊🏼🤙🏼🙏🏼
@dranik84
2 жыл бұрын
Dudeeeee.. you saved me.. yellow wire lol.. my friends 2006 corrola s was also red wire #12 Worked like a charm. Cut and tape.
@Food-is_Life
2 жыл бұрын
@@dranik84 yea the dude on the video was a bit confusing so I had to let people know what was what and what to cut and not mess up their car. I’m glad I was able to help you. God bless
@rodneyd76
Жыл бұрын
I'm gonna try it fasure
Works beautifully, it's hard to reach but once you get it it works. Thanks!
this is gold Jerry gold
Others guys say the wire pin 12
Thanks men, it work great...i appreciate your help..
this is a good info. thanks! Sr.
Perfect thanks
Hi there, just curious if you happen to know this fix on a 2014 base model?
Eff that, I like ppl looking at me with my DL on!! Lol, Thank You sir.
If I cut this and put a switch in line with the yellow wire, would that be the right wire to cut?
Hello.. Please tell me. This way for yellow automatic driving light
For what year corollas will this work?
Hi, someone knows how to delete the daylight on high beam, but keeping the automatic night light on off??? because I want to install my own LED daylight that looks better and modern. corolla 2010
@ownubadboy10
6 жыл бұрын
U can't do that
I did exactly the same as the video shows. After cutting the wire and connect it to the ground my parking lights are on all the time unless i turn the switch to off position. Is the parking lights suppose to be on while driving? I forgot to check mine before cutting it.
Hello..please tell me this is for yellow automatic light or headlight
@alfredocarrillomartinez6872
4 жыл бұрын
ITS FOR DAY LIGHTS
@Youworstnightmare77
Жыл бұрын
We call it day running lights or drl
It's possible go back after to do this?
@TheChrisWard01
7 жыл бұрын
You could simply solder it back