Just bought a 2017 SR5 premium today. Can't wait to kit it out, thanks for sharing!

@Hookemdavid

Жыл бұрын

Nice! Share pictures/videos if you can! Enjoy!

Truck looks sweet dude. Thanks for posting this

@Hookemdavid

Жыл бұрын

Yeah, for sure. I know there’s a lot of good videos out there but very limited when it comes to running this lift (at least from what I’ve seen). Feel free to share your set up here or send link. Enjoy man!

Looks great! Looking to get me a 4Runner OFP. Thanks for that detail Very helpful

@Hookemdavid

Жыл бұрын

Absolutely, glad it was helpful.

Looks great 👌🏽

@Hookemdavid

Жыл бұрын

Thanks!

She's a beast, looks good.

@Hookemdavid

Жыл бұрын

Thanks for you comment!

looks great. Thinking of blacking out my SR5 and getting the same wheels but in a glossy black instead of matte black.

Hi, love your Toyota 4 Runner I have a 2021 Toyota 4Runner premium and I love ❤️ it I had a 2019 Toyota tundra and I kind of miss it but I love ❤️ my Toyota 4Runner. Can you make a video of your inside? Thank you 🙏 😊

I like the Relationship Race 🛞 wheeels

Nice set up bro. Same set up as mine stage 2👍

@Hookemdavid

Жыл бұрын

Nice! Pretty good lift IMO for what I use it for (minimal off road).

Thanks for the video, I want this exact lift. Did you have to do an alignment after the lift? I hear toyota will not do an alignment on a lifted vehicle?

Nice!!

@Hookemdavid

Жыл бұрын

Thanks!

You mentioned central Texas. I’m in that area also, what shop did you use to get the work done?

That thing is awesome. Very nice set up. Looking to do something similar, but i hear things about adjust the pan hard rod? Is that something you did or is necessary?

@Hookemdavid

Жыл бұрын

I've also heard of that. Unfortunately, I didn't hear about that until I had already installed the lift, etc. I haven't encountered any issues but will look into it.

TRD PRO? FUCK YEAHHHHHHHHHHH

@Hookemdavid

Жыл бұрын

Hola Amigo! Tienas un 4Runner?

Sick truck! How is it riding these days with this set up? Any pros/cons you can share?

@Hookemdavid

Жыл бұрын

Hey, thanks for the comment. Ride is smooth, smoother than stock, tbh. I’ve done cheap lifts on trucks and they rode very stiff, this lift is not stiff at all, IMO. Pros: Ride height, looks a lot “tougher”, IMO, ability to run large tires. Cons: Fuel economy down to about 16.5 - 17, truck is heavier due to the heavier tires.

4 Runner lookin beefy 🥩

@Hookemdavid

Жыл бұрын

Thanks for the comment! Glad you enjoyed the video. :)

can you tell me the experience with icon suspension? you like it ?

Do you have KDSS?

Any reason youre running 3" of lift? From my reasearch, at that height you lose a good bit of down travel, run into potential binding issues and it pulls yours wheels in a bit. Just looks?

@Hookemdavid

Жыл бұрын

Tbh, I’m not sure. It sounds like you’ve done a lot more research than I. I do use the 4x4 but mainly to get through muddy conditions, don’t do much rock climbing, etc. I went with this lift because I wanted something that would be comfortable and not super stiff like I’ve had buying cheaper lifts. I thought this lift was a good mid tier lift for the money. I know there are a lot better ones but again, I don’t even get close to pushing this to its limits. The lift is actually a 0-3.5 lift. I think it’s probably closer to 2.75 because I left the coil overs the way they came from the factory which is what they recommended for ride comfortability. Hopefully this video is helpful in your build man. Good luck!

@Hookemdavid

Жыл бұрын

**But yes, mainly looks but with some comfort too.

Hey brother, I’m thinking about the RR5-S in a -12 offset for my new TRD Offroad with no lift. I’m going to get all terrains but keep the 265/70/17 size. Do you think there will be any issues with rubbing or should I play it safe and get a 0 offset? I don’t mind trimming the front bumper and removing the mud flaps.

@Hookemdavid

Жыл бұрын

Good question! To be honest, I'm not 100% sure. My gut is telling me that you'll probably be fine but I would hate to suggest something and it not work out for you. I'm also assuming that returning wheels is probably a hassle, etc. Have you checked CustomOffsetGallery? Or their Offset Calculator? The first link below has a few tabs; check out the "Wheel/Tire Size Comparison and Clearance Tab". Also the second link is another channel that I watched that helped me understand offset. ALSO, based on my research, -24mm offset is equivalent to about 1 inch, so -12 should be .5 inches wider if your current wheels are 0 offset. Be-careful though, some factory wheels have a positive offset so that positive offset would need to be accounted for. Let me know how it turns out. Feel free to share a video/pic once you get it done! www.customwheeloffset.com/tire-wheel-backspacing-offset-calculators?gclid=CjwKCAiAioifBhAXEiwApzCztiauCUGqbYQEeErm8mL8OPsURmKCPKlbsNjQ2rYNJ-pezW68GDg1jhoCIukQAvD_BwE kzread.info/dash/bejne/h2yCmKyTdbyTY84.html

@redeemed2517

Жыл бұрын

@@Hookemdavid thanks man, I really appreciate you taking the time to give a detailed response. I have the factory TRD Offroad wheels, 17x7.5 with a +15 offset so I assume a 0 offset would be -15mm from the factory and a -12 would be -27mm from the factory wheel. I’ve watched that video that you recommended and there’s a ton of good info. I did a wheel offset calculator and a -12mm would extend out 39.7mm more than the factory which would equate to a little over an inch and a half. My goal isn’t necessarily to have a poke but the RR5-S wheels that I like in gloss black are sold out in the 0 offset but they’re available in the -12. I’m not in a huge rush so I may just wait to see if they come back in stock. Thanks again and I’ll keep you informed. 👍🏼

@galatrieu8055

Жыл бұрын

My car is lifted but still have 265/70/17 at ko2 tire with -12 offset like those in the video and it does seem it will rub if u want that setup on your stock 4Runner.

@Hookemdavid

Жыл бұрын

You might also want to check out this channel! They do a ton of lifts/ levels etc and they share tire sizes with offsets etc. they may even have some stock trucks that just want a wheels mod etc. youtube.com/@88ROTORS

I can only admire from afar what mine would look like if it had a lift like this one. Only issue is, it wouldn’t fit in my garage.😒

@Hookemdavid

Жыл бұрын

Ahh; luckily it still fits in my garage.

17x9-12?

Loving the rig brother, but getting rid of those steps would make it look more “lifted”.

@Hookemdavid

Жыл бұрын

Haha, yeah you're probably right. Thinking of putting some sliders tbh.

33s = 285/75s

Take those goofy mud flaps off man lol. Get the mud flap delete kit for the rear

@Hookemdavid

Жыл бұрын

Haha, I'm thinking about it.

@teakwood2286

Жыл бұрын

@@Hookemdavid i went with the ARK mud flap delete. Turned out great, wish i would have done it sooner. Did you go 2 inch lift in the front and 1 in the rear? looking to get my lift done next spring. Nice rig.

Did you have an issue with bump steer with the angle of the Panhard Rod? As this owner states in this video kzread.info/dash/bejne/X4tptsiJnqiohLA.html

those mudflaps are useless with those tires anyways...rip em off!

@Hookemdavid

Жыл бұрын

Lol, yeah I found that out this weekend when I encountered a little mud. Seriously considering it, just don't know how it would look.