over 7K + miles and no check engine light. Engine maintenance have been such a breeze. I highly recommend you do this MOD. Have fun

@thomasbaize3366

3 жыл бұрын

NuttyNu Do you know why after I did this my truck would run rich and get bad gas mileage

@NuttyNu

3 жыл бұрын

@@thomasbaize3366 adjust your arm, these engine run rich!

@oscaritowin

3 жыл бұрын

Questions, does the mileage stay the same or get a tinny bit better

@NuttyNu

2 жыл бұрын

@@oscaritowin same

@robbiesharp311

2 жыл бұрын

Why would you do this? What advantages?

Just got the EGR kit, about to install it today. I like the picture show at the end of the video. That truck looks nice, I especially like the moon roof.

@NuttyNu

2 жыл бұрын

thank you

Deleted mine last night. Improved an idle surge I had. Also found a split in the large pair valve hose that I didn't know was there. Used a 1-1/4" pvc pipe cap for the intake hose blocker which measures 2" od on the cap...perfect fit. Added the 10k resistor and no codes. If ya have a pile of resistors laying around the color code for 10k is Brown Black Orange. Exhaust smells like its burning cleaner.

@glenn098765

Ай бұрын

any light on the dash?

Ty mate, just replaced a knock sensor to get rid of a check engine for 24 hours then it started throwing a 71 so egr malfuntion. Might do this shit cheers

Thanks man I just did mine you helped a lot of my confusion 👍🏻👍🏻

@NuttyNu

3 жыл бұрын

Glad I could help

You got the pair and the egr valves backwards. The egr valve injects the dirty exhaust into the intake, hence why that long tube is black. Also the pair injects fresh air into the exhaust and is why the big rubber line goes from the intake to that surge box then the hard line then the pair valve

Great video thanks I know what I'm doing this weekend.

@NuttyNu

13 күн бұрын

Hope you enjoy

Good job man very through. Much appreciated.

@NuttyNu

3 жыл бұрын

No problem 👍

I’m glad you are doing this !! 😃

@NuttyNu

4 жыл бұрын

More to come!

Nice job Nu.

The mid size hardline you plugged is for the power steering.

Great video, thanks. Can you add the link to buy the kit?

Lots of good information. Thanks

@NuttyNu

Ай бұрын

Glad it was helpful!

Yes! thanks man. the line by line info is great.

@NuttyNu

3 жыл бұрын

You bet!

And Gplus silicone hoses kit made it g!

Well done

Excelente te felicito

Thanks for sharing because I may be getting a 3.0 soon also have you made one for a 22R I want to do one to mine

@NuttyNu

4 жыл бұрын

22re. I have.

Thank you not sure how to put that resistor in but I’ll figure it out

@NuttyNu

3 ай бұрын

Super easy. Splice it up

I made a video as well. I got rid of all them steel lines too

Just put a ball bearing in the vacuum line of the EGR that will make it stop working too

Can u send a link for the vaccum plug kits?

what is the object of removing them other than space

Do you know if I can clean the MAF sensor in that v6 3.0? If so how cause I took off the part of the air cleaner where it’s located and I can’t see the MAF sensor

@cadenwetherelt8721

2 жыл бұрын

I believe its a few inches to the left of his finger at 3:40 . I didn't have luck just getting the sensor so I took the whole assembly off and sprayed cleaner at the only sensor I saw. Let it dry completely and that should help

Nice truck...Where did you get the rims, and tires (size)? Any suspension change? The truck looks like 4 wheel drive; awesome!

@NuttyNu

2 жыл бұрын

Yes and yes

Great video as always, I might do this but what is the benefit?

@NuttyNu

3 жыл бұрын

cleaner simply engine bay

@wilsontannous6062

3 жыл бұрын

@@NuttyNu that’s it? It really got in my way when I was doing injectors but I guess if I can go without it I will. Thank you

Спасибо бро!!! Очень помог разобраться с системой привет из россии

So where does the resistor actually go , the delete kit shows a gray plug. One guy says green. Another says temp. sensor.... You say two different places, either works? Wish someone would show and confirm for the 3.0. Also my engine does rev down when turning the steering wheel and stalled at least once, I will be hooking my power steering lines back up.

@NuttyNu

3 жыл бұрын

Try no resistor for now

Did you leave thr vacuum to brake booster hooked up. Thanks for any help

@NuttyNu

3 жыл бұрын

Billy Ingram yes

how do you get the damn hose off the goes to PAIR? It's hidden underneath plenum and stubbornly hanging on with a spring clamp.

@NuttyNu

2 жыл бұрын

Long needle pliers

Why you didt show how to putt resistors?? What about charcoal canister?

@NuttyNu

4 жыл бұрын

leave canister, I didn't need to put a restore, so maybe u might now too as well

Is for more power o more gas eficiencia

hello I did the egr delete and the engine runs smoother and I feel the truck running more agile as if I was running with a large load on the truck before egr delete, but now man what a difference, but the only complaint is that I see the truck running with ooor gas mileage. Did you Get the same issue low gas mileage after the egr delete?

@NuttyNu

2 жыл бұрын

No change in MPG for me

Hey bro. Very helpful info but I still have one question. Where does your hoses for the idle up valve run to?

@NuttyNu

Жыл бұрын

Delete,

@vlt9678

Жыл бұрын

@@NuttyNu it looks like yours is still on there and plugged in. I removed my hardline and now I’m not sure if one of the hose used to go on it or not.

I own a ‘94 Camry Imzfe v6 and I’m thinking about doing a Vacuum delete, any improvement from doing this?

@NuttyNu

3 жыл бұрын

cleaner bay

@beamishlotus7269

3 жыл бұрын

@@NuttyNu got it, thanks, although i will most likely not delete it, I just found out here in Puerto Rico that it’s illegal, sadly

I have the same engine and I'm getting a code 24 and code 31...rough idle, rich running, hesitation sometimes when i press on the gas pedal, check engine light on, and occasional backfire when first starting (cold). The truck came with an EGR delete set up, as well as a cold air intake simplification mod when I bought it. If you (or anyone) could offer some guidance, I am by myself and really need help. Thanks

@user-hx6yx3ky1n

5 ай бұрын

Hey I’m curious how your engine is doing now? My truck has code 24, 52, 12 and it was recently diagnosed with a cracked cylinder… hope yours it’s doing good!

Thanks

@NuttyNu

2 жыл бұрын

No problem

Hi bro,j have issue with connection of fuel syztem, do you know how it works, or is there any scheme. Thank you

@NuttyNu

Ай бұрын

No idea

where the resistors go, I have not been able to find clear information about that

@NuttyNu

3 жыл бұрын

try with out one first and see if your CEL comes on

question: the a/c idle up valve works with that delete?

@boomer5276

Жыл бұрын

No

By deleting these parts and EGR, will this affect smogging or performance ??

@NuttyNu

3 жыл бұрын

You will not pass smog, no performance loss or fains

What size is the new vacuum lines you used. Waiting on my delete kit now. Thanks

@NuttyNu

4 жыл бұрын

didn't use any

@billyingram3492

4 жыл бұрын

@@NuttyNu thanks for responding, I had heard it takes around 5.

You can get rid of the whole hardline setup and actually cut the metal pipe for coolant in the rear and run it straight around to the front of engine at water pump intake! Then just run injection hoses for your regulartor! I literally have a huge box of crap that I pulled out of the engine bay! Plus I put cold air and 4 hole injectors and I Cruze up hills that I used to have to shift to 3rd in 5th now!

@mylesstratton2668

3 жыл бұрын

what is your fuel mileage after doing the delete and the 4 hole injectors

What did you use or where did you get the blocks for the pair?

@NuttyNu

2 жыл бұрын

Ordered online, I forgot which vendor, but Google should help

@parkerjantz2690

2 жыл бұрын

@@NuttyNu Thank you!

So im new to the 3vze is this a better option to run better with less issues

@NuttyNu

2 жыл бұрын

yes, if your state dont have emissions. I'd would do it

Does it help with fuel efficiency? Any notice on that?

@NuttyNu

2 жыл бұрын

no

Thanks for the detailed information. Is there a performance improvement as well or will it just be more reliable?

@NuttyNu

3 жыл бұрын

no performance, just makes it easier for your engine bay to do things, the EGR is useless and only for emission purpose

@Gabrielmata24

3 жыл бұрын

Thanks! Either way it's much cheaper than replacing a faulty $180 EGR valve

@NuttyNu

3 жыл бұрын

YES!!

@johnnyjohn8073

2 жыл бұрын

@@Gabrielmata24 $180, it's true...I've just looked it up in Oreillys here in southern Cali. Good thing I god a shiny almost new one from a junk yard last year. It also came with a new EGR temperature sensor with wire, which is $215. I guess after a $400 expense the guy still couldn't pass smog in southern Cali & he just junked it. Are you concerned that you may not pass the visual inspection part of the smog test? Or do you simply smog it by other methods...if you know what I mean.

@Gabrielmata24

2 жыл бұрын

@@johnnyjohn8073luckily I'm in Texas so I just deleted it and went on about my way!

@NuttyNu Do you know why after I did this my truck would run rich and get bad gas mileage

@NuttyNu

3 жыл бұрын

adjust your AFM, theres video on how to do that.

Great mod, waiting on my delete kit too haha. I see you still respond to people on here, by any chance do you have any documentation or any way to know the order of the vacuum lines on the side of the plenum? Been over hualing the engine and I noticed today that my labels have fallen off. Kinda lost on where a couple lines go, especially the two that are attached to the bottom of the power steering solenoid. I'm having the hardest time trying to find some diagrams or even a picture for the 3vze. Any help would be greatly appreciated!

@NuttyNu

3 жыл бұрын

just plug them into the intake, it all serve the same purpose.

@shaneaudet6606

3 жыл бұрын

The advice he gives you in the comment is wrong. You definitely need to hook up the correct vacuum lines . There is a diagram on second generation mafia on Facebook

Where did you say you buy the parts from? What’s the name of the shop or phone number or website?

@bigmac22ify

Жыл бұрын

Try Lc engineering they should sell a kit

Removing the EGR cooler is no joke. Spent a small fortune buying specialized tools. In retro, would have been better to take it to a mech and see if the mech will remove - clean the darn thing Myself, and have mech put it back together- to save $/time. Good vid, brother.

@douglas1982b

3 жыл бұрын

I did all mine in a days worth of work with basic tools. Not sure what ya mean

@rjmac3001

9 ай бұрын

Huh? You just need standard tools

Awesome information! Thank you! Do you have info on ADD need electric diagram of this system I traced vacuum lines but have no clue as to where to look for switches that control the vacuum solenoids on passenger fender

@NuttyNu

3 жыл бұрын

Yes I’ve made a video on that

@NuttyNu

3 жыл бұрын

kzread.info/dash/bejne/k5t4s9KGpLWqiLw.html

I’ve had mine off for years and all the hard lines under the plenum and I cut the “U” in the heater coolant line and brought it right down to inlet/outlet at the front of the engine. Plus evap canister gone cause I put all -6an fuel lines with a cleanable filter I put on the out l side of the passenger frame rail! And I put in bigger injectors and I bet you I gained over a hundred whp! Plus completely redid the MFV to open early. Not recommended it took me a year to get that right and a lot of tinkering! But my rig is as fast if not faster than my 96’ 3.4l by a good bit and I had that all super up too! And man you could use some bigger wires! Bigger wire means less resistance which is bigger spark which equals hotter burn! My engine bay is a lot emptier than yours but what a difference this makes to your rig! You can get rid of the entire hardline setup. Also grab the full silicone hose kit from Amazon it’s a good deal!

Hello I did the same thing as you did with the egr but when I turn it on my truck shakes and and smells like gas when we turn it on. It also accelerate like crazy without even pushing the gas

@NuttyNu

3 жыл бұрын

Double check the work. maybe you have a exhuast leak

@josejose6364

3 жыл бұрын

Thank you very much for your help I'm gonna double check the air filter. Because the motor shames and it pops sometimes

@shaneaudet6606

3 жыл бұрын

Check intake gasket for leak

Wait, isn't an egr delete illegal? I want to remove mine, because I am pretty sure its faulty, but I thought it was illegal because of emissions?

@NuttyNu

2 жыл бұрын

check you local state laws

ur egr is acually the pair lol

@bloodOntheStep

3 жыл бұрын

That’s what I was thinking what is all the other stuff that he removed for?

Did your pickup truck pass inspection after you deleted the EGR?

@NuttyNu

Жыл бұрын

No it won’t and my state has none

So is it just for more room or does it add horse power?

@NuttyNu

4 ай бұрын

Both

My question is how to do on my toyota 95 t100 3400 24 valves

@NuttyNu

3 жыл бұрын

the 3.4 engine does not have a EGR. you will be good

Only ever did a 22re 2wd .. never did 4x4.

How to put more power in that motor

@NuttyNu

3 жыл бұрын

None, just make it reliable

And if u want it to run even better also remove the radiator, the battery and alternator lol 😂

@NuttyNu

3 жыл бұрын

Already did it, runs amazing!

Question - manual locking hubs ?

@NuttyNu

10 ай бұрын

Yes

Where did you get the small plugs

@NuttyNu

2 жыл бұрын

Local parts store

Wait a minute, is this from anchorage too!

Is this good or bad for your engine?

@NuttyNu

5 ай бұрын

Yes

Where do you buy the rubber stoppers? share link please😊

@NuttyNu

Жыл бұрын

They’re called vacuum cap. Most auto parts store has them!

@mer25able

Жыл бұрын

@@NuttyNu Thalíak’s

Where can I buy the kit

@NuttyNu

3 жыл бұрын

I got it from LCE

How’s it running? Every time I tell a mechanic I want to do this they get mad lol

@NuttyNu

3 жыл бұрын

runs great

@bloodOntheStep

3 жыл бұрын

@@NuttyNu this is what the mechanic told me? Is this right?: (Whatever exhaust gas recirculation is not used or pushed out of the exhaust goes back into the motor and it clogs up your injectors the EGR valve exhaust gas recirculation unit is what pushes the exhaust gases out of the unit out of the vehicle.) I cope and pasted that from my conversation with him.

@bloodOntheStep

3 жыл бұрын

@@NuttyNu how is exhaust gas gonna clog up injectors? Is that even a thing? Just looking for more opinions, I have wanted to do the egr delete for a couple years I don’t see the point in it.

@MrS22222

Жыл бұрын

@@bloodOntheStep the egr valve lowers combustion temperatures to make more power with less fuel. High combustion temperatures leaves a lot of soot.

Any after videos of it driving?

@NuttyNu

5 ай бұрын

Drives great

What are the benefits of doing the eve delete?

@NuttyNu

4 жыл бұрын

Just F do it !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@douglas1982b

3 жыл бұрын

Mainly a cleaning engine bay and less junk in the way when you change the plugs and stuff.

Can you do this in California?

@NuttyNu

2 жыл бұрын

NO

Link for delete kit?

@NuttyNu

2 жыл бұрын

hi, just search it on LCE, they have it on their website

@vetmecharms

2 жыл бұрын

Thanks man got it today will use your video to help

I thought you was gonna do the delete on camera

@NuttyNu

4 жыл бұрын

No time to film that sorry

will this pass smog test???

@NuttyNu

9 ай бұрын

It will not pass.

Don't take mechanical advice from anyone who talks about Harr lines or spark plugs hoses!

@NuttyNu

3 жыл бұрын

dont take advice from the internet!

If you run the 3.0, I wouldnt do this mod. The ERG makes the engine run less hot, not by a huge amount but over 100k-200k miles that temperature adds up to wear n tear. On an engine thats notorious for bad head too

@NuttyNu

3 ай бұрын

3.4 swap when it blowd

@stevewright6632

3 ай бұрын

@@NuttyNu Yeah solid, don't turbo the fuck out of those old drive trains and maybe redo the headers and it'll go for another 30 years haha

I stripped a 12 mil..now what?

@KWAHU93

11 ай бұрын

Vise grips

Obviously, this guy does not live in California. Do this and you will flunk smog in a heartbeat.

@NuttyNu

2 жыл бұрын

yes in alaska, no emission here like Cali

Some one needs to show the removal by hand step by step instead of showing this after the work has been done…. Pointing and showing after the fact might not show the areas which need to be done …A bright light would help the work to be seen!!

The second I see some wearing sandals and I have to look at your toes! I’m out!

It pass smog if a do the egr delete ?

@NuttyNu

4 жыл бұрын

NOOOO

@MasterHustler

3 жыл бұрын

Most are exempt from smog test. Over 25 years old bro.

@benjithehunter

3 жыл бұрын

@@MasterHustler Depends on the state. Bro

What to delete? The entire 3.0.

@NuttyNu

4 жыл бұрын

Haha. I see what you did there

@orlandomuniz876

3 жыл бұрын

Swap for the 3.4 5vz

@benjithehunter

3 жыл бұрын

very reliable engine.... not a lot of HP.

Deleting emission stuff is illegal. ARe you sure, dude? YOu don't have to make it too obvious by taking out the parts. You can 'plug n play' without disabling the parts. That is what TIG welders are for. 🤣🤣

@AnotherRandomPoser

Жыл бұрын

There is no federal law barring people from doing these modifications. If you live out West your truck will not pass smog tests and resale will be FUBAR, but in the midwest for example you can do whatever the hell you want.

@rabidfarmer9765

Жыл бұрын

@@AnotherRandomPoser Red states sure. But liberal states - them Democrats will fleece your ass w/ emission crap.

@micsmarvelousmusic8686

7 ай бұрын

Taking the parts out clears up so much space, easier to work on other things

Just trash the 3.0 😆

@NuttyNu

Жыл бұрын

3.4 swapped

You refer to the EGR valve as the pair valve the the Pair and the EGR. Your video is BS and needs to be corrected.

@NuttyNu

2 жыл бұрын

then make your own !

What about smog checks?

@NuttyNu

11 ай бұрын

Won’t pass

I did watch half of the video , I don't want to see the part you pull out the engine.......!