TOYOTA 22RE EGR AND AIR INJECTION DELETE

Step by step process of egr and air injection system removal on a 22re
block off plates used:
209yota1.com/products/egr-del...

Пікірлер: 192

  • @saltdrum
    @saltdrum2 жыл бұрын

    AND THAT IS HOW YOU MAKE A VIDEO BOYS. WELL DONE, INFORMATIVE, TOO THE POINT, AND NOT BORING.

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Thank you! that's exactly what I'm going for with my videos.

  • @Benjieboy1993
    @Benjieboy19932 жыл бұрын

    Dude!! Soooo true I bought my kit like a year ago and couldn’t figure out how to do it cuz none of the other videos made sense. Top tier quality

  • @jimmybates1972jcb

    @jimmybates1972jcb

    2 жыл бұрын

    Where did you get the kit from?

  • @Benjieboy1993

    @Benjieboy1993

    2 жыл бұрын

    @@jimmybates1972jcb Lce performance

  • @hunterketcham7913
    @hunterketcham7913 Жыл бұрын

    Easily the best tutorial on the internet. Thank you

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Thank you. glad it helps!

  • @kaiealden6843
    @kaiealden68433 жыл бұрын

    thank you i have been looking for a clear video like this.

  • @archaicautomotive2444

    @archaicautomotive2444

    3 жыл бұрын

    Of course! Glad it helps, that's the whole reason I made this video all the other ones on KZread kind of suck. Lol

  • @austin2739
    @austin27392 жыл бұрын

    Video suggestion if you’d like you could start future videos off showing everything you need at the beginning tools parts etc generally speaking I think a lot of beginners and people who are not very mechanically inclined would really appreciate but like everyone else has said great video man literally the best on this topic on KZread

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Thank you!

  • @CopeManMTNDEW
    @CopeManMTNDEW Жыл бұрын

    Nice. I was confused on what to do for the vapor canister and fuel regulator. Now I know. Thanks

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Glad it helps!

  • @davemixen8872
    @davemixen8872 Жыл бұрын

    Ya no doubt best version of removal I’ve seen 🤙🏻

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Thank you!

  • @gabrielulibarri9950
    @gabrielulibarri99502 жыл бұрын

    Very informative, great video!

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Thank you!

  • @Guitarhero1000
    @Guitarhero1000 Жыл бұрын

    Turned me on to a good website to buy these kind of parts. Thank you.

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Good to hear! There's a lot of good sites for these old trucks. LC engineering, yota shop, yota1, just to name a few.

  • @Dr.Reason
    @Dr.Reason2 ай бұрын

    Not even half way through and I’ve decided to keep mine. Goodness!

  • @dundeeecroc
    @dundeeecroc2 жыл бұрын

    WOW, well done!! good job!

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Thank you!

  • @Seyerkei
    @Seyerkei3 жыл бұрын

    Great video. About to do this mod very soon

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Thank you!

  • @natalied989
    @natalied9897 ай бұрын

    I appreciate this video so much. All the other ones I watched assume the viewer knows WAY too much and skip a lot of details. Thank you for making this. My only critique, coming from someone who has no idea what they are doing is sometimes it was zoomed so close I couldnt tell where exactly on the engine you were working and the words sometimes got in the way of seeing what you were doing but I still think Ill be able to figure it out from watching this. Thank you!

  • @archaicautomotive2444

    @archaicautomotive2444

    7 ай бұрын

    Glad it helps! Also since I've made this video I have bought a wide-angle lens so I can get shots a little better in upcoming videos. please let me know if you have any questions

  • @natalied989

    @natalied989

    7 ай бұрын

    @@archaicautomotive2444 I do have a question. For taking off one of the pieces you mentioned you would have taken off the tire. Which tire would have made it easier? And if I have access to a lift would that make any of the hard to teach bolts easier to get off or are they just stuffed into hard to reach crevices no matter what?

  • @archaicautomotive2444

    @archaicautomotive2444

    7 ай бұрын

    @@natalied989 passenger side tire.

  • @joelsolizjr.4263
    @joelsolizjr.42632 жыл бұрын

    What about the VSV sensors, disconnect them, have two of them only with no factory a/c?

  • @bigjimbo560
    @bigjimbo5607 ай бұрын

    great video, thanks....going to do this delete to my sons 22re soon

  • @archaicautomotive2444

    @archaicautomotive2444

    7 ай бұрын

    Glad it helps! let me know if you have any questions.

  • @aerialrescuesolutions3277
    @aerialrescuesolutions32772 жыл бұрын

    Very well done. I've watched several of these videos about this exact topic, you covered this very well, mine is a carburated model, and we're going with a new Weber and perhaps an intake as well. Any thoughts about better intakes, versus stock? Thanks, Jim

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Thank you Jim! My other truck seen in the other video is an 87 4x4 22R with a Weber carb. As for manifolds go I hear the offenhauser is a better flowing manifold due to the runner design. You can find it on LC engineering's website. Also if you have a 4x4 truck and you do offroad the Weber does not like real steep angles and will bog down you can correct this by doing the "Hill climb mod" I'm pretty sure you can find a write-up on Google still.

  • @haanichargualaf7293
    @haanichargualaf7293 Жыл бұрын

    The best video yet keep it coming btw @7:48 do I need to block off the air injection where it mounts to the intake ? Pls answer as soon as you can. Thank you again solid video👌🏽

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Thank you! And yes you should cap off the port from the air injection that goes to the intake. If you go to the auto parts store and look for "heater bypass caps" you should be able to find something that fits.

  • @Abg-398
    @Abg-3982 жыл бұрын

    Nice job

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Thank you!

  • @joelsolizjr.4263
    @joelsolizjr.42632 жыл бұрын

    Just saw the video, very explanatory unlike other videos. Do you have to mess around with the coolant lines that run around the IAC valve? 👍

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Thank you and no I didn't have to mess with the coolant lines at all.

  • @joshmoore6172
    @joshmoore61722 жыл бұрын

    Great video. What did you do with the two vac ports on the valve located under the throttle body tps? Did you cap these off or use them? Thanks

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    The idle air control valve hoses? I left those alone. I'm pretty sure if you delete that the engine will run like garbage at a cold start.

  • @joshmoore6172

    @joshmoore6172

    2 жыл бұрын

    @@archaicautomotive2444 I believe they are the bimetal valve to the egr diagram. It is the valve threaded into the coolant line just above the cold start temp sensor.

  • @adamsmiddy
    @adamsmiddy2 жыл бұрын

    What'd you do with the VSVs on top of that bracket? I have a brown, blue, and a grey one... do you just unplug their vacuum hoses and electric connectors?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Yeah just unpluged them and caped them off. The only one I left was the one for the AC.

  • @BassSniper209
    @BassSniper20911 ай бұрын

    Fantastic been chasing a egr system issue but ca just won't let me live my life

  • @archaicautomotive2444

    @archaicautomotive2444

    11 ай бұрын

    Glad it helps! Also F California 😂

  • @Bull1970
    @Bull19702 ай бұрын

    Thank you

  • @archaicautomotive2444

    @archaicautomotive2444

    2 ай бұрын

    Glad it helps!

  • @gmaster8007
    @gmaster80072 жыл бұрын

    Yo great video. Great music too. Quick question. Do you put back the nut and bolt after removing the vacuum tree? Looks like its two of the lower intake manifold bolts?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Yes everything was put back. I actually messed up in the video because you don't need to fully take out the bolt closest to the firewall you can actually just loosen it up and pull the vacuum tree out.

  • @gmaster8007

    @gmaster8007

    2 жыл бұрын

    @@archaicautomotive2444 roger that. Thanks.

  • @gmaster8007

    @gmaster8007

    2 жыл бұрын

    @@archaicautomotive2444 i watched your video about 20 times. Great music!! Thanks

  • @MBR1238
    @MBR12382 жыл бұрын

    I have one question... If i do this and i get the check engine light how do i take it off??? Thanks

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    You have to put a resistor into the EGR connector to trick it. 10k ohm I believe.

  • @keithking286
    @keithking2862 жыл бұрын

    Where does the vacuum line coming from the bottom of the fuel pressure regulator run to now? That’s where I’m stuck at on my install.

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    I just ran it up to one of the ports on the 3 way vacuum connector @11:05

  • @oliverawins3448
    @oliverawins34482 жыл бұрын

    Question what did you do with the hardness that comes off the egr ? And what about the hoses that come off the power steering??

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Mine does not have power steering but when hose should connect directly to the manifold and the other should connect to the idle adjuster in the center of the manifold. As for the EGR I just taped off the connector but to prevent check engine light you want to put a resistor in place.

  • @dts313

    @dts313

    10 ай бұрын

    Do you know what size resistor to use?

  • @joelsolizjr.4263
    @joelsolizjr.42632 жыл бұрын

    What about the VSV sensors you disconnect them both or just plug them up, no factory a/c? Helpful video.

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    I disconnected every other one but the AC. I just left that one in place.

  • @zo3us
    @zo3us11 ай бұрын

    Other than the vacuum lines connected to the carburetor, is the process generally the same for a 22r?

  • @archaicautomotive2444

    @archaicautomotive2444

    10 ай бұрын

    Yes, I'd say it's actually a bit easier. My other truck is a 87 22R so I've done it on both. Let me know if you have any questions.

  • @40calAnimalControl
    @40calAnimalControl13 күн бұрын

    Mine has AC also. What lines do I keep for that? Currently have the head off, just got it back from the machine shop and have all the plates in place.

  • @archaicautomotive2444

    @archaicautomotive2444

    12 күн бұрын

    @@40calAnimalControl Just the two that come off the Black VSV.

  • @kimberlycrotts858
    @kimberlycrotts8582 жыл бұрын

    At 3:36 You have remove throttle body and vtv vacuum lines ... the 2 lines you disconnected from the front that are one on top of the other and has that little black cap on top.... what do you do with those? Cap them off?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Yes I just capped them off.

  • @kimberlycrotts858

    @kimberlycrotts858

    2 жыл бұрын

    @@archaicautomotive2444 thank you ....

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    @@kimberlycrotts858 Of course, glad it helps!

  • @2.4RC
    @2.4RC25 күн бұрын

    So the fuel pressure regulator does get used not deleted also ? And if so does it stay bolted onto the air injection valve but just capped off ?

  • @archaicautomotive2444

    @archaicautomotive2444

    24 күн бұрын

    No the fuel pressure regulator stays in place.

  • @RcbasherNcrasher13
    @RcbasherNcrasher132 жыл бұрын

    What bolts do I need to buy to use these plates.. I bought plates but came with no hardware?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Should be M8x1.25 bolts. Not sure on the exact length. Probably 20 or 30mm

  • @mountainman4410
    @mountainman441011 ай бұрын

    On the models that need the resistor: What size is needed to make the engine light not come on?

  • @archaicautomotive2444

    @archaicautomotive2444

    11 ай бұрын

    10k ohm resistor.

  • @tonywhisnant1691
    @tonywhisnant16912 жыл бұрын

    Where do I get one of these block kits ? Is that something I can ask for at the auto place or so I order it ? What do you call it ?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Lots of companies have them for sale. These are from Yota one I posted the link in the description.

  • @509Familia
    @509Familia2 жыл бұрын

    New to 22re, might be a stupid question but the removal of all this is just for looks or what benefit does it do?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    I'm both my Toyota trucks the EGR was full of carbon and no longer worked, not to mention on the 22RE the fuel filter is much easier to get to now with the air injection system out of the way.

  • @toyscars978

    @toyscars978

    2 жыл бұрын

    @@archaicautomotive2444 I understand but only for the fuel did you take it away or does it have any benefit such as more power?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    @@toyscars978 I personally don't think it adds any power but some people will argue that. A big added benefit though is that it keeps all that nasty carbon crap out of the intake.

  • @steve5912

    @steve5912

    2 жыл бұрын

    @@toyscars978 it adds a lot of power and runs cooler and smoother

  • @Seriousbaker
    @Seriousbaker3 жыл бұрын

    Its dope

  • @Farrell_instincts
    @Farrell_instincts2 ай бұрын

    I plan on doing this with my vehicle, but doesn't this cause it to run lean? Like the O2 sensor is used to getting that much extra air, when it stops getting it doesn't it make it go rich?

  • @archaicautomotive2444

    @archaicautomotive2444

    Ай бұрын

    No as far as know The computer will just adjust mixture accordingly. All the air injection/ egr system does is make the burn a little cleaner by injecting a little fresh air into the cylinders for cleaner burn.

  • @Dustinp_18
    @Dustinp_18 Жыл бұрын

    That about the 2 vacuum lines on the ac switch on the top of the valve cover?

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    I just left those in place.

  • @wolf-pu8qd
    @wolf-pu8qd2 жыл бұрын

    nice ! i'm new one, 2 questions: Where does fresh air enter the cylinder? I live in California and must have EGR, right? thank you !

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Yes if your truck is a California model you should have an EGR. Also fresh air comes from the air pump underneath the intake manifold. It injects fresh air into the exhaust ports through those large metal lines that wrap around the back of the engine.

  • @louissilva4180
    @louissilva418011 ай бұрын

    What does this accomplish and what do you need to put in place besides capping it off

  • @archaicautomotive2444

    @archaicautomotive2444

    11 ай бұрын

    Cleaner engine bay, easier access to the starter and fuel filter. And that's really it besides the block off plates you just cap off what you don't need.

  • @ColonCrusher
    @ColonCrusher2 жыл бұрын

    I know it doesn’t add hp but does it make it run any better?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    I'd say mine runs a little better, the EGR was definitely pretty filled full of carbon.

  • @steve5912

    @steve5912

    Жыл бұрын

    It does add hp

  • @straightshooterz
    @straightshooterz2 жыл бұрын

    If I live in a state that requires smog, I won’t pass smog with EGR delete?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    California huh? No I don't think you will.

  • @dundeeecroc
    @dundeeecroc2 жыл бұрын

    I have a 1985 4runner SR5 with 22rec and I want to do the same thing. how will I clean out the plenum?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Clean out? Its pretty easy to take off the upper plenum just a few bolts. Eagle One aluminum cleaner and pressure washer works great for cleaning them.

  • @dundeeecroc

    @dundeeecroc

    2 жыл бұрын

    @@archaicautomotive2444 Thanks, I will do just that!

  • @Frank-bf6gx
    @Frank-bf6gx11 ай бұрын

    Just came across this video THANK YOU ! My headgasket blew , just got the head back Friday , so this is the perfect time to do it ! & what resister did you use ?

  • @archaicautomotive2444

    @archaicautomotive2444

    10 ай бұрын

    I didn't use a resistor on mine but any 10K ohm resistor you can find at an electronic shop should work.

  • @Frank-bf6gx

    @Frank-bf6gx

    10 ай бұрын

    Thanks for the info ! @@archaicautomotive2444

  • @KuxxTJ671
    @KuxxTJ671 Жыл бұрын

    I have the EGR deleted in my 22R but what is the purpose of deleting the air injection?

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Nothing really other than a cleaner engine bay. If the system still works just fine there's no harm in keeping it.

  • @korybrown121
    @korybrown1217 ай бұрын

    Can you still pass emissions test that affect anything at all on the engine for the emissions?

  • @archaicautomotive2444

    @archaicautomotive2444

    7 ай бұрын

    That is a very good question... I couldn't tell you. I live in a state where we don't require emissions. But I would say most likely not if you live in California.

  • @Mr.NiceGuy0.1134
    @Mr.NiceGuy0.11342 жыл бұрын

    What is the name of the red/orange plug at 4:03 right in front of your hand I'm having a hard time finding out what that is called. Correction, what is the blueish one behind it called mine is broke

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    That's the plug for the VSV (vacuum switching valve)

  • @Mr.NiceGuy0.1134

    @Mr.NiceGuy0.1134

    2 жыл бұрын

    Thanks for replying, I figured out what it was called after a couple days of looking around, one of my ends on the vacuum line broke off

  • @rubenpimentel6712
    @rubenpimentel67122 жыл бұрын

    A question? Nothing is necessary delete it all and function normal vehicle?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    No none of this is really necessary, it's basically emission stuff. Except if you have air conditioning you want to leave that little black VSV hooked up.

  • @2.4RC
    @2.4RC25 күн бұрын

    And the whole vsv lines and connectors also get deleted ?

  • @archaicautomotive2444

    @archaicautomotive2444

    24 күн бұрын

    Most of them and I just left the connections unplugged and tucked them back.

  • @flyprincess69
    @flyprincess698 ай бұрын

    Im doing this!

  • @archaicautomotive2444

    @archaicautomotive2444

    7 ай бұрын

    Good luck! Please let me know if you have any questions.

  • @masonlacoste4210
    @masonlacoste42102 жыл бұрын

    Can you post a link to the block off plates you used? Trying to delete my 91

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Yes I'll see if I can add a link to the description.

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Alright got the link in the description for you. Hope it helps!

  • @masonlacoste4210

    @masonlacoste4210

    2 жыл бұрын

    It’s funny cause I actually found and purchased them before you got a chance to reply haha but thank you anyway! I have deleted it now and it’s all good hah thank you very much

  • @steve5912
    @steve59122 жыл бұрын

    This is not true egr delete will always increase power because when exhaust is recirculated it can’t be reburned which means it’s displacing some of the air in each cylinder with exhaust instead of fresh air = lower performance and engine runs hotter

  • @erasmoochoa8744
    @erasmoochoa87448 ай бұрын

    What is the advantage of cancel egr system??

  • @archaicautomotive2444

    @archaicautomotive2444

    8 ай бұрын

    Cleans up the engine bay, makes it a lot easier to get to your fuel filter too.

  • @fernandodavidreyesdiaz7037
    @fernandodavidreyesdiaz7037 Жыл бұрын

    Excuse me, did you put the resistor on it and how many volts is it or where do they sell it?

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    I did not. But I believe it's a 10k resistor. I'm sure you could find them online or at a local electronics shop.

  • @fernandodavidreyesdiaz7037

    @fernandodavidreyesdiaz7037

    Жыл бұрын

    @@archaicautomotive2444 thanks brother, did you put your pick up? and the other question is if you only put the egr connector. The plugs of the solenoids are only disconnected?

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    @@fernandodavidreyesdiaz7037 I don't have the resistor in there I just have it unplugged. Hasn't given me any issue. I figure the best way to add the resistor would be cut off the old connector to the sensor and run the resistor in between.

  • @fernandodavidreyesdiaz7037

    @fernandodavidreyesdiaz7037

    Жыл бұрын

    @@archaicautomotive2444 Well I just wanted to know if you only have the egr plugs and the solenoid plugs disconnected to do the same thing you did and remove it from my pick up my brother

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    @@fernandodavidreyesdiaz7037 Yes I have them disconnected. The only solenoid I have still plugged in on the valve cover is for the air conditioning.

  • @viciousme90
    @viciousme902 жыл бұрын

    Way! better then that lce engineering one.

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Haha yeah the LCE video is crap. One of the reasons I decided to make this video.

  • @Giroux68
    @Giroux68 Жыл бұрын

    I've watched this a ton to get these damn vacuum lines right

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Glad it helps you! That's why I make these videos.

  • @Mr.NiceGuy0.1134
    @Mr.NiceGuy0.11347 ай бұрын

    I did this and my check engine light disappeared. But my idle still surges up and down when I press the brake pedal, it started doing that after I did my timing chain and guides. Good video by the way.

  • @archaicautomotive2444

    @archaicautomotive2444

    7 ай бұрын

    Several things you might want to check. Throttle position sensor adjustment. Coolant level/make sure there is no air in the cooling system. Vacuum leaks/The condition of the o-ring that goes around the throttle body idle adjustment screw. All those things can give you a looping idle. If it happened after you did the timing chain I would guess that you probably have a little air in the cooling system.

  • @Mr.NiceGuy0.1134

    @Mr.NiceGuy0.1134

    7 ай бұрын

    Alright, I will check all of those things. Thank you for responding 👍

  • @archaicautomotive2444

    @archaicautomotive2444

    7 ай бұрын

    @@Mr.NiceGuy0.1134 No problem! Please let me know if you have any more questions.

  • @Mr.NiceGuy0.1134

    @Mr.NiceGuy0.1134

    6 ай бұрын

    ​@@archaicautomotive2444I seemed to have fixed my surging idle. My engine was idling at 1,600 rpm once it was warm and I figured out how to adjust it. Once I adjusted it to run at 1,000 rpm I no longer have the surging idle problem.

  • @archaicautomotive2444

    @archaicautomotive2444

    6 ай бұрын

    @@Mr.NiceGuy0.1134 excellent that's what I like to hear!!! Glad you were able to figure it out.

  • @calebm.7200
    @calebm.7200 Жыл бұрын

    How do i know which ones are for a/c?

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Should be the one with the gray connector. The lines will go to the idle adjustment screw on the intake.

  • @jb.8629
    @jb.86294 ай бұрын

    What do you do with the bimetal valve?

  • @archaicautomotive2444

    @archaicautomotive2444

    4 ай бұрын

    I just left it in place disconnected. You can also buy plugs off LC engineering to plug them.

  • @jb.8629

    @jb.8629

    4 ай бұрын

    @archaicautomotive2444 okay thank you mine are just unplugged but that's how it came when I bought the truck and didn't know if they needed to be plugged. Thank you again

  • @archaicautomotive2444

    @archaicautomotive2444

    4 ай бұрын

    @@jb.8629 No problem!

  • @samvan7527
    @samvan75272 жыл бұрын

    Excellent video, I just wish you would've shown how you hooked up the AC vac switch.

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Thanks! The only thing I did was unbolt the AC vacuum switch from the bracket. The lines are still in the same location as they originally were.

  • @samvan7527

    @samvan7527

    2 жыл бұрын

    @@archaicautomotive2444 Thank you.

  • @trentp151
    @trentp1515 ай бұрын

    This is interesting. How does it run and idle afterwards? Can you do this on a 22re with an automatic transmission? Does it affect gas mileage?

  • @archaicautomotive2444

    @archaicautomotive2444

    5 ай бұрын

    Runs just fine. I assume you could do it on an automatic too shouldn't really make a difference. As far as gas mileage goes I can't say I've noticed an increase or decrease.

  • @trentp151

    @trentp151

    5 ай бұрын

    @@archaicautomotive2444 Cool. I am having an issue with the EGR vacuum modulator causing problems shifting (I suspect), and they are getting hard to find aftermarket at parts stores, so I was thinking about deleting that whole system.

  • @archaicautomotive2444

    @archaicautomotive2444

    5 ай бұрын

    @@trentp151 You could also probably temporarily vacuum cap off the connections and see if that makes a difference.

  • @davidserna358
    @davidserna358 Жыл бұрын

    What about the egr crossover block off plate

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    You can buy one from LCE. I just left the stock one on there.

  • @redbrown5721
    @redbrown5721 Жыл бұрын

    Good video. Can a problem in this system make a misfire ??

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Yes if the EGR is not working correctly it can cause a misfire.

  • @miguelibarra4626
    @miguelibarra46262 жыл бұрын

    I’m new to the Toyota pickup, what’s the purpose of this ?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    If you live in a state with no emissions than most of the stuff can be removed. Less clutter in the engine bay and usually a lot of these old emissions Parts don't work right after so many years. Also it makes getting to the fuel filter a lot easier.

  • @jacobgreen6939
    @jacobgreen6939 Жыл бұрын

    what does this do exactly?

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Keeps the intake from getting filled with carbon and build up from the EGR. Also more room to work and easier access to the fuel filter.

  • @juanacosta9100
    @juanacosta91002 жыл бұрын

    We're can I get block of plate

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    I got mine from Yota one performance, Lc engineering also sells them. I've also used a few cheap sets off eBay but they don't fit that well.

  • @reaper352c5
    @reaper352c5 Жыл бұрын

    i deleted my vacuum canister since it wasn't working at all. i kept getting the smell of gas in my truck and once i removed it. the smell went away.

  • @geoffdeeringer7802
    @geoffdeeringer78023 ай бұрын

    It would of been nice to see the engine after words and the pile on the ground. But still nice video

  • @toyscars978
    @toyscars9782 жыл бұрын

    where do I get the caps teacher

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Lots of companies sell them but the ones I used in the video are in the link in the description.

  • @toyscars978

    @toyscars978

    2 жыл бұрын

    @@archaicautomotive2444 thansk you

  • @99fxr68
    @99fxr688 ай бұрын

    Thanks. Gonna do this to my 88 4Runner. What about the EGR cooling plate? I see there is block offs for that. That was your “pain in the ass” bolt. I have my trans out currently so it’s right there😂

  • @archaicautomotive2444

    @archaicautomotive2444

    8 ай бұрын

    I just left the original in place but lce sells the fancy block plate if you want to buy it.

  • @UncleCuck
    @UncleCuck2 жыл бұрын

    What’s the purpose of doing this?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Cleans up the engine bay nicely. Also makes the fuel filter a lot easier to get to.

  • @brianasides5137
    @brianasides51372 жыл бұрын

    How did you run ac idle up diaphragm vacumn lines?

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    I left them exactly how they were, just unbolted the vacuum switch from the bracket. Feel free to message me if you need help or a pic of it.

  • @KickDiesel1

    @KickDiesel1

    2 жыл бұрын

    @@archaicautomotive2444 do you have pictures of where you git it located I have all switches removed

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    I just have zip tied out of the way.

  • @alasdairtemple2011

    @alasdairtemple2011

    2 жыл бұрын

    @@archaicautomotive2444 could I get a pic please? Bought a 88 with this done already and wanna make sure everything is done right

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    @@alasdairtemple2011 of course just message me on my Instagram.

  • @blackthunder151
    @blackthunder1513 жыл бұрын

    First

  • @michaelhernandez6178
    @michaelhernandez6178 Жыл бұрын

    If she was a man, they would have investigated that statement and try to put him in jail

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Lol what?

  • @michaelhernandez6178

    @michaelhernandez6178

    Жыл бұрын

    Lol this was for another post and it jump to another while typing 😅 😂 🤣

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    @@michaelhernandez6178 😂😂😂

  • @paulcini6084
    @paulcini60842 жыл бұрын

    horrible music but well done

  • @archaicautomotive2444

    @archaicautomotive2444

    2 жыл бұрын

    Blame KZread LOL the music library sucks.

  • @paulcini6084

    @paulcini6084

    2 жыл бұрын

    @@archaicautomotive2444 haha still better than most songs people add

  • @Sith_dude
    @Sith_dude2 ай бұрын

    And that's how you get a federal charge. By modifying or removing emission control devices on your vehicle. Don't listen to this clown

  • @40calAnimalControl

    @40calAnimalControl

    13 күн бұрын

    If you live in a shit state perhaps.

  • @michaelhernandez6178
    @michaelhernandez6178 Жыл бұрын

    Does it run better on gas after doing this

  • @archaicautomotive2444

    @archaicautomotive2444

    Жыл бұрын

    Honestly haven't noticed a difference. But at the same time I don't drive this truck as much as my other one.