Towbar wiring kit - installation manual [HD]

Пікірлер: 32

  • @byfunkyoid2917
    @byfunkyoid29179 жыл бұрын

    Brill video! Fitted my ow with help from this video, thanks so much.

  • @Holmseyd
    @Holmseyd11 жыл бұрын

    Thanks for that, helped me plenty cheers!

  • @paul-ne1bh
    @paul-ne1bh4 жыл бұрын

    hello can you help me in any way i am fitting a towbar on my 2011 peugeot 3008 i am fitting a relay on the wiring do i have to remove the negative lead of my battary many thanks

  • @train4905
    @train49052 жыл бұрын

    Superb job.

  • @robertwright3369
    @robertwright33698 жыл бұрын

    this guy is really good . they should feature him on mission impossible films

  • @joebcfcable
    @joebcfcable7 жыл бұрын

    why cant the manufacturer just have a plug to connect the towbar for your certain electrics

  • @mgjohn8534

    @mgjohn8534

    3 жыл бұрын

    Some have that very useful facility. There's a spur connector off the lighting sub-loom in the boot of my Rover 620ti I've used for towing for about twenty years. Rover had an inexpensive kit which is simply plug and play straight to my trailer board or trailer connections. Works a treat. Before I realised that connector was there hidden behind the boot lining side trim, and a wiring accessory kit was available, on another 620ti in the family I did what the Guy in this vid did. Lots of block connectors and Multi Meter explorations identifying what wires go where. That worked well but nowhere near as convenient as that useful plug and play connector.

  • @beautgrainger147

    @beautgrainger147

    11 ай бұрын

    Some BMW's also have a module available, for towing, and even one for parking sensors.

  • @sumomanu
    @sumomanu Жыл бұрын

    Excellent presentation. But I have seen other clips that shows that have to connect a long wire to the battery as well. Is it necessary?

  • @errolmagill1611

    @errolmagill1611

    Жыл бұрын

    When he joined the red wire to the heavy white wire under the dash; that would be the required permanent live - saved him from going into the engine bay to the battery.👍

  • @MarkJohnson-du2bc
    @MarkJohnson-du2bc6 жыл бұрын

    Left brake light not working?

  • @Snitchy1989
    @Snitchy19897 жыл бұрын

    so basically you just tap off the wires to the back lights? What about the added relay that may be required?

  • @errolmagill1611

    @errolmagill1611

    Жыл бұрын

    Steps 8 and 9 - they are calling it a Module in the video.👍

  • @khuong-minhhong8610
    @khuong-minhhong86103 жыл бұрын

    can you tell me where can i get tow bar kit

  • @tomsalmon8191
    @tomsalmon81918 жыл бұрын

    Fantastic Video, Step by Step instructions. Cheers.

  • @perandersen7175

    @perandersen7175

    7 жыл бұрын

    nej

  • @dranglepipp
    @dranglepipp6 жыл бұрын

    mine makes a clicking sound long after the key is removed from the car. Think it drains the battery

  • @MrSupergrez

    @MrSupergrez

    5 жыл бұрын

    take the fuse out or add an on off switch

  • @janzahradnik756
    @janzahradnik75611 жыл бұрын

    Opravdu "jednoduché" :-))))

  • @kennethmogensen5975
    @kennethmogensen59756 жыл бұрын

    why is there only breaklight at the right side :-)

  • @mariusfauru

    @mariusfauru

    5 жыл бұрын

    😂😂😂

  • @MrSupergrez

    @MrSupergrez

    5 жыл бұрын

    it was a test module

  • @sandymackie8466
    @sandymackie84668 жыл бұрын

    Do we have to have the fucking music!

  • @johnstanton8499

    @johnstanton8499

    8 жыл бұрын

    Yes watched the whole thing then i realised i could have turned the sound down!

  • @mewmewdesigns895

    @mewmewdesigns895

    7 жыл бұрын

    Sandy Mackie yeah I would have preferred the installer talking and explaining over the music

  • @LabRat6619

    @LabRat6619

    6 жыл бұрын

    I spent the whole video dancing then realised I could have turned the music off!

  • @bryanschuler4260
    @bryanschuler42604 жыл бұрын

    porntrack special!

  • @grahampreece4846
    @grahampreece48464 жыл бұрын

    Can’t watch the video for the crap music

  • @stephenmccormack281
    @stephenmccormack281 Жыл бұрын

    It is not a good idea to put tape on soldered wires or indeed scotch locks..Heat shrink should be always used;;it's more professional

  • @gelumiro1160
    @gelumiro11603 жыл бұрын

    usa la guaina termorestringente,butta via il nastro siamo nel 2020

  • @leehilton-hall2417
    @leehilton-hall24175 жыл бұрын

    This is awful

  • @frankiepitt9135

    @frankiepitt9135

    5 жыл бұрын

    In what respect?